DOI QR코드

DOI QR Code

Pullout resistance of treadmats for reinforced soil structures

  • 투고 : 2016.01.12
  • 심사 : 2017.06.29
  • 발행 : 2018.01.20

초록

A series of pullout tests were carried out on waste tire treadmats of various weave arrangements, with confining stresses ranging from 9 to 59 kPa approximately, in order to investigate the pullout behavior and to apply the results to the design of treadmat reinforced soil structures. A treadmat reinforcement can be considered as belonging to the extensible type thus progressive failure would develop in every tread. The pullout capacity of a treadmat was found to be generally equal to the sum of capacities of the longitudinal treads, with minor enhancement realized due to the presence of transverse treads. Pullout failures occurred in treadmats under light surcharge and with treadmats with higher material presence per unit area, while breakage failures occurred in treadmats under heavier surcharge and with treadmats with higher ratio of opening. The pullout capacity of a treadmat increased with increasing surcharge height and treadmat stiffness. A pullout test on a commercially available geogrid was also carried out for comparison and the pullout capacity of a treadmat was found higher than that of the comparable geogrid under identical loading conditions, indicating the merit of using the treadmat as an alternative to the chosen geogrid.

키워드

과제정보

연구 과제 주관 기관 : Inha University

참고문헌

  1. Abdi, M.R. and Arjomand, M.A. (2011), "Pullout tests conducted on clay reinforced with geogrid encapsulated in thin layers of sand", Geotext. Geomembr., 29(6), 588-595. https://doi.org/10.1016/j.geotexmem.2011.04.004
  2. Bergado, D.T., Chai, J.C., Abiera, H.O., Alfaro, M.C. and Balasubramaniam, A.S. (1993), "Interaction between cohesivefrictional soil and various grid reinforcements", Geotext. Geomembr., 12(4), 327-349 https://doi.org/10.1016/0266-1144(93)90008-C
  3. Chen, C., McDowell, G.R. and Thom, N.H. (2013), "A study of geogrid-reinforced ballast using laboratory pullout tests and discrete element modeling", Geomech. Geoeng., 8(4), 244-253. https://doi.org/10.1080/17486025.2013.805253
  4. Deb, K. and Konai, S. (2014), "Bearing capacity of geotextilereinforced sand with varying fine fraction", Geomech. Eng., 6(1), 33-45. https://doi.org/10.12989/gae.2014.6.1.033
  5. Esfandiari, J. and Selamat, M.R. (2012), "Laboratory investigation on the effect of transverse member on pullout capacity of metal strip reinforcement in sand", Geotext. Geomembr., 35, 41-49. https://doi.org/10.1016/j.geotexmem.2012.07.002
  6. FHWA (2001), Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines, FWHA Demonstration Project 82, Federal Highway Administration, U.S. Department of Transportation, Washington D.C., U.S.A.
  7. Gerscovich, D.M.S., Medeiros, L.V. and Sayao, A.S.F.J. (2001), "Field pullout test of scrap tire reinforcement layers under different soil surcharges", Proceedings of the 15th International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey, August.
  8. Humphrey, D.N. and Katz, L.E. (2000), "Five-year field study of water quality effects of tire shreds placed above the water table", J. Transport. Res. Board, 1714, 18-24. https://doi.org/10.3141/1714-03
  9. Humphrey, D.N. and Katz, L.E. (2001), "Field study of water quality effects of tire shreds placed below the water table", Proceedings of the Conference on Beneficial Use of Recycled Materials in Transportation Applications, Arlington, Virginia, U.S.A., November.
  10. JATMA (2015), .
  11. Jewell, R. (1990), "Reinforcement bond capacity", Geotechnique, 40(3), 513-518 https://doi.org/10.1680/geot.1990.40.3.513
  12. Kang, Y., Nam, B., Zornberg, J.G. and Cho, Y.H. (2015), "Pullout resistance of geogrid reinforcement with in-plane drainage capacity in cohesive soil", KSCE J. Civil Eng., 19(3), 602-610. https://doi.org/10.1007/s12205-013-0274-4
  13. KATECH (2001), .
  14. KECO (2015), .
  15. Kim, K.S., Yoon, Y.W. and Yoon, G.L. (2011), "Pullout behavior of cell-type tires in reinforced soil structures", KSCE J. Civ. Eng., 15(7), 1209-1217. https://doi.org/10.1007/s12205-011-1307-5
  16. Mahdi, M. and Katebi, H. (2015), "Numerical modeling of uplift resistance of buried pipelines in sand, reinforced with geogrid and innovative grid-anchor system", Geomech. Eng., 9(6), 757-774. https://doi.org/10.12989/gae.2015.9.6.757
  17. Niroumand, H. and Kassim, K.A. (2013), "A review on uplift response of symmetrical anchor plates embedded in reinforced sand", Geomech. Eng., 5(3), 187-194. https://doi.org/10.12989/gae.2013.5.3.187
  18. O'Shaughnessy, V. and Garga, V.K. (2000a), "Tire-reinforced earthfill. Part 2: Pull-out behaviour and reinforced slope design", Can. Geotech. J., 37(1), 97-116. https://doi.org/10.1139/t99-085
  19. O'Shaughnessy, V. and Garga, V.K. (2000b), "Tire-reinforced earthfill. Part 3: Environmental assessment", Can. Geotech. J., 37(1), 117-131. https://doi.org/10.1139/t99-086
  20. RMA (2015), htttp://www.rma.org, Scrap tire markets in the United States, Rubber Manufacturers Association.
  21. Suksiripattanapong, C., Horpibulsuk, S., Chinkulkijniwat, A. and Chai, J.C. (2013), "Pullout resistance of bearing reinforcement embedded in coarse grained soils", Geotext. Geomembr., 36, 44-54. https://doi.org/10.1016/j.geotexmem.2012.10.008
  22. Takallou, H.B. (2015), "Waste tire management and EPR programs in United States and Canada", Proceedings of the 2015 RCBC Zero Waste Conference, Whistler, British Columbia, Canada, May-June.
  23. Vashi, J.M., Desai, A.K. and Solanki, C.H. (2013), "Behavior of geotextile reinforced flyash+clay-mix by laboratory evaluation", Geomech. Eng., 5(4), 331-342. https://doi.org/10.12989/gae.2013.5.4.331
  24. Yoon, Y.W. (2007), "Engineering characteristics of tire treads for soil reinforcement", IW-TDGM 2007, International Workshop on Scrap Tire Derived Geomaterials, Japanese Geotechnical Society, Yokosuka, Japan, March.
  25. Yoon, Y.W., Cheon, S.H. and Kang, D.S. (2004a), "Bearing capacity and settlement of tire-reinforced sands", Geotext. Geomembr., 22(5), 439-453. https://doi.org/10.1016/j.geotexmem.2003.12.002
  26. Yoon, Y.W., Cho, S.S. and Kim, K.S. (2007), "Engineering properties of tire treads for soil reinforcement", J. Kor. Geoenviron. Soc., 8(1), 49-55.
  27. Yoon, Y.W., Heo, S.B. and Kim, K.S. (2008), "Geotechnical performance of waste tires for soil reinforcement from chamber tests", Geotext. Geomembr., 26(1), 100-107. https://doi.org/10.1016/j.geotexmem.2006.10.004
  28. Yoon, Y.W., Moon, C.M. and Kim, G.H. (2004b), "Utilization of waste tires as soil reinforcement; (2) Environmental effects", J. Kor. Geotech. Soc., 20(3), 119-128.