DOI QR코드

DOI QR Code

Modified discontinuous deformation analysis for rock failure: Crack propagation

  • Chen, Yunjuan (School of Civil Engineering, Shandong Jianzhu University) ;
  • Zhang, Xin (School of Civil Engineering, Shandong Jianzhu University) ;
  • Zhu, Weishen (Geotechnical and Structural Engineering Research Center, Shandong University) ;
  • Wang, Wen (Shandong Urban Construction Vocational College)
  • 투고 : 2016.08.09
  • 심사 : 2017.08.07
  • 발행 : 2018.03.20

초록

Deformation of rock masses is not only related to rock itself, but also related to discontinuities, the latter maybe greater. Study on crack propagation at discontinuities is important to reveal the damage law of rock masses. DDARF is a discontinuous deformation analysis method for rock failure and some modified algorithms are proposed in this study. Firstly, coupled modeling methods of AutoCAD-DDARF and ANSYS-DDARF are introduced, which could improve the modeling efficiency of DDARF compared to its original program. Secondly, a convergence criterion for automatically judging the computation equilibrium is established, it could overcome subjective drawbacks of ending one calculation by time steps. Lastly but not the least, relationship between the super relaxation factor and the calculation convergence is analyzed, and reasonable value range of the super relaxation factor is obtained. Based on these above modified programs, influences on crack propagation of joint angle, joint parameters and geo-stresses' side pressure are studied.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Belytschko, T. and Lu, Y.Y. (1994), "Element free Galerkin methods", J. Numer. Meth. Eng., 37(2), 229-256. https://doi.org/10.1002/nme.1620370205
  2. Benz, W. and Asphaug, E. (1995), "Simulations of brittle solids using smoothed particle hydrodynamics", Comput. Phys. Commun., 87(1-2), 253-265. https://doi.org/10.1016/0010-4655(94)00176-3
  3. Haeri, H. (2015), "Simulating the crack propagation mechanism of pre-cracked concrete specimens under shear loading conditions", Strength Mater., 47(4), 618-632. https://doi.org/10.1007/s11223-015-9698-z
  4. Haeri, H., Khaloo, A. and Marji, M.F. (2014), "A coupled experimental and numerical simulation of rock slope joints behavior", Arab. J. Geosci., 8(9), 7297-7308. https://doi.org/10.1007/s12517-014-1741-z
  5. Haeri, H., Khaloo, A. and Marji, M.F. (2015), "Experimental and numerical analysis of Brazilian discs with multiple parallel cracks", Arab. J. Geosci., 8(8), 5897-5908. https://doi.org/10.1007/s12517-014-1598-1
  6. Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2013), "Experimental and numerical study of crack propagation and coalescence in pre-cracked rock-like disks", J. Rock Mech. Min. Sci., 67, 20-28.
  7. Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2014), "On the cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression", J. Central South Univ., 21(6), 2404-2414. https://doi.org/10.1007/s11771-014-2194-y
  8. Haeri, H., Shahriar, K., Marji, M.F. and Moarefvand, P. (2013), "A coupled numerical-experimental study of the breakage process of brittle substances", Arab. J. Geosci., 8(2), 809-825. https://doi.org/10.1007/s12517-013-1165-1
  9. Jiao, Y.Y., Zhang, H.Q., Tang, H.M., Zhang, X.L., Adoko, A.C. and Tian, H.N. (2014), "Simulating the process of reservoirimpoundment-induced landslide using the extended DDA method", Eng. Geol., 182, 37-48. https://doi.org/10.1016/j.enggeo.2014.08.016
  10. Jiao, Y.Y., Zhang, H.Q., Zhang, X.L., Li, H.B. and Jiang, Q.H. (2015), "A two-dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing", J. Numer. Meth. Eng., 39(5), 457-481.
  11. Jiao, Y.Y., Zhang, X.L. and Li, T.C. (2010), Discontinuous Deformation Analysis for Modeling Jointed Rock Failure Process, Science Press, Beijing, China.
  12. Lee, H.W. and Jeon, S.W. (2011), "An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression", J. Solid. Struct., 48(6), 979-999. https://doi.org/10.1016/j.ijsolstr.2010.12.001
  13. Libersky, L.D., Petschek, A.G., Carney, T.C., Hipp, J.R. and Allahdadi, F.A. (1993), "High strain Lagrangian hydrodynamics: A three-dimensional SPH code for dynamic material response", J. Comput. Phys., 109(1), 67-75. https://doi.org/10.1006/jcph.1993.1199
  14. Liu, R.C, Jiang, Y.J. and Li, B. (2016), "Effects of intersection and dead-end of fractures on nonlinear flow and particle transport in rock fracture networks", Geosci. J., 20(3), 415-426. https://doi.org/10.1007/s12303-015-0057-7
  15. Mahmoud, B., Kamran, G., Mohammad, F.M. and Aliakbar, G. (2014), "Numerical simulation of crack propagation in layered formations", Arab. J. Geosci., 7(7), 2729-2737. https://doi.org/10.1007/s12517-013-0885-6
  16. Mohammadi, M. and Tavakoli, H. (2015), "Comparing the generalized Hoek-Brown and Mohr-Coulomb failure criteria for stress analysis on the rocks failure plane", Geomech. Eng., 9(1), 115-124. https://doi.org/10.12989/gae.2015.9.1.115
  17. Niroumand, H., Mehrizi, M.E.M. and Saaly, M. (2016), "Application of mesh-free smoothed particle hydrodynamics (SPH) for study of soil behavior", Geomech. Eng., 11(1), 1-39. https://doi.org/10.12989/gae.2016.11.1.001
  18. Rabczuk, T. and Zi, G. (2007), "A meshfree method based on the local partition of unity for cohesive cracks", Comput. Mech., 39(6), 743-760. https://doi.org/10.1007/s00466-006-0067-4
  19. Scavia, C. (1999), The Displacement Discontinuity Method for the Analysis of Rock Structures: A Fracture Mechanic, in Fracture of Rock, WIT/Computational Mechanics, Boston, Massachusetts, U.S.A.
  20. Shi, G.H. (1988), "Discontinuous deformation analysis-a new numerical model for the statics and dynamics of block system", Ph.D. Dissertation, University of California, Berkeley, California, U.S.A.
  21. Shi, G.H. (1999), "Applications of discontinuous deformation analysis and manifold method", Proceedings of the 3rd International Conference on Analysis of Discontinuous Deformation, Vail, Colorado, U.S.A., June.
  22. Vasarhelyi, B. and Bobet, A. (2000), "Modeling of crack initiation, propagation and coalescence in uniaxial compression", Rock Mech. Rock Eng., 33(2), 119-139. https://doi.org/10.1007/s006030050038
  23. Vesga, L.F., Vallejo, L.E. and Lobo-Guerrero S. (2008), "DEM analysis of the crack propagation in brittle clays under uniaxial compression tests", J. Numer. Meth. Eng., 32(11), 1405-1415.
  24. Wang, P.T., Yang, T.H., Xu T., Cai, M.F. and Li, C.H. (2016), "Numerical analysis on scale effect of elasticity, strength and failure patterns of jointed rock masses", Geosci. J., 20(4), 539-549. https://doi.org/10.1007/s12303-015-0070-x
  25. Wang, W. (2014), "The discontinuous deformation analysis considering the block internal coupling effect and plastic anchoring effect", Ph.D. Dissertation, Shandong University, Ji'nan, China.
  26. Yang, S.Q., Yang, D.S., Jing, H.W., Li, Y.H. and Wang, S.Y. (2012), "An experimental study of the fracture coalescence behavior of brittle sandstone specimens containing three fissures", Rock Mech. Rock Eng., 45(4), 563-582. https://doi.org/10.1007/s00603-011-0206-x
  27. Yoon, J. (2007), "Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation", J. Rock Mech. Min. Sci., 44(6), 871-889. https://doi.org/10.1016/j.ijrmms.2007.01.004
  28. Zhang, X.L. (2007), "Study on numerical methods for modeling failure process of semi-continuous jointed rock mass", Ph.D. Dissertation, Chinese Academy of Sciences, Wuhan, China.
  29. Zhang, X.P. and Louis, N.Y.W. (2012), "Cracking processes in rock-like material containing a single flaw under uniaxial compression: A numerical study based on parallel bondedparticle model approach", Rock Mech. Rock Eng., 45(5), 711-737. https://doi.org/10.1007/s00603-011-0176-z
  30. Zhou, X.P., Bi, J. and Qian, Q.H. (2015), "Numerical simulation of crack growth and coalescence in rock-like materials containing multiple pre-existing flaws", Rock Mech. Rock Eng., 48(3), 1097-1114. https://doi.org/10.1007/s00603-014-0627-4
  31. Zhou, X.P., Cheng, H. and Feng, Y.F. (2014), "An experimental study of crack coalescence behavior in rock-like materials containing multiple flaws under uniaxial compression", Rock Mech. Rock Eng., 47(6), 1961-1986. https://doi.org/10.1007/s00603-013-0511-7
  32. Zhu, W.S., Chen, Y.J., Li, S.C., Yin, F.Q., Yu, S. and Li, Y. (2014), "Rock failure and its jointed surrounding rocks: A multi-scale grid meshing method for DDARF", Tunn. Undergr. Sp. Tech., 43, 370-376. https://doi.org/10.1016/j.tust.2014.05.015

피인용 문헌

  1. Highly efficient iterative methods for solving linear equations of three‐dimensional sphere discontinuous deformation analysis vol.44, pp.9, 2018, https://doi.org/10.1002/nag.3062
  2. Optimal design of shape of a working in cracked rock mass vol.24, pp.3, 2021, https://doi.org/10.12989/gae.2021.24.3.227