DOI QR코드

DOI QR Code

Experimental study on propagation behavior of three-dimensional cracks influenced by intermediate principal stress

  • Sun, Xi Z. (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Shen, B. (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Zhang, Bao L. (College of Mining and Safety Engineering, Shandong University of Science and Technology)
  • 투고 : 2016.11.20
  • 심사 : 2017.07.11
  • 발행 : 2018.02.10

초록

Many laboratory experiments on crack propagation under uniaxial loading and biaxial loading have been conducted in the past using transparent materials such as resin, polymethyl methacrylate (PMMA), etc. However, propagation behaviors of three-dimensional (3D) cracks in rock or rock-like materials under tri-axial loading are often considerably different. In this study, a series of true tri-axial loading tests on the rock-like material with two semi-ellipse pre-existing cracks were performed in laboratory to investigate the acoustic emission (AE) characteristics and propagation characteristics of 3D crack groups influenced by intermediate principal stress. Compared with previous experiments under uniaxial loading and biaxial loading, the tests under true tri-axial loading showed that shear cracks, anti-wing cracks and secondary cracks were the main failure mechanisms, and the initiation and propagation of tensile cracks were limited. Shear cracks propagated in the direction parallel to pre-existing crack plane. With the increase of intermediate principal stress, the critical stress of crack initiation increased gradually, and secondary shear cracks may no longer coalesce in the rock bridge. Crack aperture decreased with the increase of intermediate principal stress, and the failure is dominated by shear fracturing. There are two stages of fracture development: stable propagation stage and unstable failure stage. The AE events occurred in a zone parallel to pre-existing crack plane, and the AE zone increased gradually with the increase of intermediate principal stress, eventually forming obvious shear rupture planes. This shows that shear cracks initiated and propagated in the pre-existing crack direction, forming a shear rupture plane inside the specimens. The paths of fracturing inside the specimens were observed using the Computerized Tomography (CT) scanning and reconstruction.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China, Natural Science Foundation of Shandong Province

참고문헌

  1. Adams, M. and Sines, G, (1978), "Crack extension from flaws in a brittle material subjected to compression", Tectonophys., 49(1-2), 97-118. https://doi.org/10.1016/0040-1951(78)90099-9
  2. Bobet, A. and Einstein, H.H. (1998), "Failure coalescence in rock-type material under uniaxial and biaxial compression", J. Rock Mech. Min. Sci., 35(7), 863-888. https://doi.org/10.1016/S0148-9062(98)00005-9
  3. Dyskin, A.V., Germanovich, L.N. and Ustinov, K.B. (1999), "A 3-D model of wing crack growth and interaction", Eng. Fract. Mech., 63(1), 81-110. https://doi.org/10.1016/S0013-7944(96)00115-4
  4. Dyskin, A.V., Sahouryeh, E., Jewell, R.J., Joer, H. and Ustinov, K.B. (2003), "Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression", Eng. Fract. Mech., 70(15), 2115-2136. https://doi.org/10.1016/S0013-7944(02)00240-0
  5. Janeiro, R.P. and Einstein, H.H. (2010), "Experimental study of the cracking behavior of specimens containing inclusions (under uniaxial compression)", J. Fract., 164(1), 83-102. https://doi.org/10.1007/s10704-010-9457-x
  6. Li, L.P., Lei, T., Li, S.C., Zhang, Q.Q., Xu, Z.H., Shi, S.S. and Zhou, Z.Q. (2015), "Risk assessment of water inrush in karst tunnels and software development", Arab. J. Geosci., 8(4), 1843-1854. https://doi.org/10.1007/s12517-014-1365-3
  7. Li, L.P., Wang, Q.H., Li, S.C., Huang, H.W., Li, S.S., Wang, K., Lei, T. and Chen, D.Y. (2014), "Cause analysis of soft and hard rock tunnel collapse and information management", Pol. J. Environ. Stud., 23(4), 1227-1233.
  8. Majid, J.O., Mehdi, F. and Davood, T. (2014), "3-d fracture analysis of cracked aluminum plates repaired with single and double composite patches using XFEM", Struct. Eng. Mech., 50(50), 525-539. https://doi.org/10.12989/sem.2014.50.4.525
  9. Park, C.H. and Bobet, A. (2009), "Crack coalescence in specimens with open and closed flaws: A comparison", J. Rock Mech. Min. Sci., 46(5), 819-829. https://doi.org/10.1016/j.ijrmms.2009.02.006
  10. Reyes, O. and Einstein, H.H. (1991), "Failure mechanism of fractured rock-a fracture coalescence model", Proceedings of the 7th International Congress of Rock Mechanics, Aachen, Germany, September.
  11. Sarfarazi, V. and Haeri, H. (2016). "A review of experimental and numerical investigations about crack propagation", Comput. Concrete, 18(2), 235-266. https://doi.org/10.12989/cac.2016.18.2.235
  12. Shen, B. (1993), "Mechanics of fractures and intervening bridges in hard rocks", Ph.D. Dissertation, Royal Institute of Technology, Stockholm, Sweden.
  13. Shen, B., Stephansson, O., Einstein, H.H. and Ghahremanl, B. (1995), "Coalescence of fractures under shear stresses in experiments", J. Geophys. Res., 100(B4), 5975-5990. https://doi.org/10.1029/95JB00040
  14. Wang, J., Li, S.C., Zhu, W.S. and Li, L.P. (2016), "Developing brittle transparent materials with 3D fractures and experimental study", Steel Compos. Struct., 22(2), 399-409. https://doi.org/10.12989/scs.2016.22.2.399
  15. Wen, Z.J., Wang, X, Tan, Y.L., Tan, Y.L. and Li, Q.H. (2016), "A study of rockburst hazard evaluation method in coal mine", Shock Vibr., 2016(16), 1-9.
  16. Wen, Z.J., Wang, X., Chen, L.J., Lin, G. and Zhang, H.L. (2017), "Size effect on acoustic emission characteristics of coal-rock damage evolution", Adv. Mater. Sci. Eng., 1-8.
  17. Wong, L.N.Y. and Einstein, H.H. (2009a), "Crack coalescence in molded gypsum and carrara marble: Part 1. Macroscopic observations and interpretation", Rock Mech. Rock Eng., 42(3), 475-511. https://doi.org/10.1007/s00603-008-0002-4
  18. Wong, L.N.Y. and Einstein, H.H. (2009b), "Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression", J. Rock Mech. Min. Sci., 46(2), 239-249. https://doi.org/10.1016/j.ijrmms.2008.03.006
  19. Wong, R.H.C. and Chau, K.T. (1998), "Crack coalescence in a rock-like material containing two cracks", J. Rock Mech. Min. Sci., 35(2), 147-164. https://doi.org/10.1016/S0148-9062(97)00303-3
  20. Wong, R.H.C., Huang, M.L., Jiao M.R. and Zhu, W.S. (2004), "The mechanisms of crack propagation from surface 3-D fracture under uniaxial compression", Key Eng. Mater., 261-263(I), 219-224. https://doi.org/10.4028/www.scientific.net/KEM.261-263.219
  21. Wong, R.H.C., Law, C.M., Chau, K.T. and Zhu, W.S. (2004), "Crack propagation from 3-D surface fractures in PMMA and marble specimens under uniaxial compression", J. Rock Mech. Min. Sci., 41(S1), 219-234.
  22. Wu, H.C., Yao, R.F, and Yip, M.C. (1977), "Experimental investigation of the angled elliptic notch problem in tension", J. Appl. Mech., 44(3), 45-461.
  23. Yang, L., Jiang Y.J., Li, S.C. and Li, B. (2013), "Experimental and numerical research on 3D crack growth in rocklike material subjected to uniaxial tension", J. Geotech. Geoenviron. Eng., 139(10), 1781-1788. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000917
  24. Yang, L., Jiang, Y.J., Li, S.C. and Li, B. (2010b), "Research on the propagation pattern of 3-D initial crack in rock-like material under uniaxial tension", Key Eng. Mater., 452-453(66), 817-820. https://doi.org/10.4028/www.scientific.net/KEM.452-453.817
  25. Yang, S.Q. (2015), "An experimental study on fracture coalescence characteristics of brittle sandstone specimens combined various flaws", Geomech. Eng., 8(4), 541-557. https://doi.org/10.12989/gae.2015.8.4.541
  26. Yun, T.S., Jeong, Y.J., Kim, K.Y. and Min, K.B. (2012), "Evaluation of rock anisotropy using 3D X-ray computed tomography", Eng. Geol., 163, 11-19.
  27. Zhao, W., Huang, R. and Yan, M. (2015), "Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation", Geomech. Eng., 8(6), 757-767. https://doi.org/10.12989/gae.2015.8.6.757

피인용 문헌

  1. Crack Initiation Behaviors of Granite Specimens Containing Crossing-Double-Flaws with Different Lengths under Uniaxial Loading vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8871335
  2. Progressive Failure and Acoustic Emission Characteristics of Red Sandstone with Different Geometry Parallel Cracks under Uniaxial Compression Loading vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/5569091
  3. Mechanical properties and cracking behaviors of limestone-like samples with two parallel fissures before and after grouting vol.28, pp.9, 2021, https://doi.org/10.1007/s11771-021-4813-8