Architectural research

  • 제20권4호
  • /
  • Pages.121-128
  • /
  • 2018
  • /
  • 1229-6163(pISSN)
  • /
  • 2383-5575(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

The Potential of Building Information Modeling in Application Process of G-SEED

  • 투고 : 2018.10.04
  • 심사 : 2018.12.21
  • 발행 : 2018.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Given the barriers to implement green building rating systems, Building Information Modeling (BIM) was suggested as an effective solution integrating information into one model and saving substantial time to facilitate certification process. Synergies between BIM and Leadership in Energy and Environment Design (LEED), the most widely used rating system, have been researched for a few decades. This paper demonstrates literature review about the development of integration between BIM and LEED. The research focuses on synergies between BIM and Green Standard for Energy & Environmental Design (G-SEED) in Korea, as one of important strategies to mitigate greenhouse gas emission. The research compares LEED and G-SEED related items based on evaluation contents. The result manifests G-SEED and LEED share many common items in different degrees. Therefore, it is entirely possible for G-SEED and BIM to adapt same developing mode of LEED and BIM. Moreover, the study measures the potential of BIM in application process of G-SEED certification by investigation of credits in LEED and G-SEED can be earned by BIM. The results of paper indicate the documentation support LEED and G-SEED may be prepared directly, semi-directly and indirectly via sustainability analyses software in BIM.

키워드

참고문헌

  1. Azhar, S., Carlton, W. A., Olsen, D., & Ahmad, I. (2011). Building information modeling for sustainable design and LEED$^{(R)}$ rating analysis. Automation in construction, 20(2), 217-224. https://doi.org/10.1016/j.autcon.2010.09.019
  2. Bank, L. C., McCarthy, M., Thompson, B. P., & Menassa, C. C. (2010, December). Integrating BIM with system dynamics as a decision-making framework for sustainable building design and operation. In Proceedings of the First International Conference on Sustainable Urbanization (ICSU).
  3. Barnes, S., & Castro-Lacouture, D. (2009). BIM-enabled integrated optimization tool for LEED decisions. In Computing in Civil Engineering (2009) (pp. 258-268).
  4. Biswas, T., Wang, T. H., & Krishnamurti, R. (2013). From design to pre-certification using building information modeling. Journal of Green Building, 8(1), 151-176. https://doi.org/10.3992/jgb.8.1.151
  5. Thibaut Abergel, Brian Dean & John Dulac. Towards a zeroemission, efficient, and resilient buildings and construction sector, Global Status Report 2017. UN Environment and International Energy Agency (2017).
  6. Gordon V.R., Holness, P.E. (2008). BIM Building Information Modeling gaining momentum. ASHRAE Journal, 50(6), 28-37.
  7. Korean Energy Agency. (2018). 2018 Korean Energy Agency Handbook. Korean Energy Agency.
  8. Krygiel, E., Nies, B. (2008). Green BIM: successful sustainable design with building information modeling. Indianapolis, Indiana. John Wiley & Sons.
  9. Lu, Y., Wu, Z., Chang, R., & Li, Y. (2017). Building Information Modeling (BIM) for green buildings: A critical review and future directions. Automation in Construction, 83, 134-148. https://doi.org/10.1016/j.autcon.2017.08.024
  10. Lee, S., & Yu, J. (2015). Comparative study of BIM acceptance between Korea and the United States. Journal of Construction Engineering and Management, 142(3), 05015016. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001076
  11. United States Green Building Council (USGBC). (2018). https://new.usgbc.org/leed.
  12. Mah, D., Manrique, J. D., Yu, H., Al-Hussein, M., & Nasseri, R. (2011). House construction CO2 footprint quantification: a BIM approach. Construction Innovation, 11(2), 161-178. https://doi.org/10.1108/14714171111124149
  13. Navarro, M (2009). Some Buildings Not Living Up to Green Label. New York Times, New York, A8.
  14. Wu, W., & Issa, R. R. A. (2010, June). Feasibility of integrating building information modeling and LEED$^{(R)}$ certification process. In Proc., Int. Conf. on Computing in Civil and Building Engineering, W. Tizani, ed., Univ. of Nottingham, Nottingham, UK.
  15. Wu, W., & Issa, R. R. A. (2012). Leveraging cloud-BIM for LEED automation. Journal of Information Technology in Construction (ITcon), 17(24), 367-384.
  16. Wu, W., & Issa, R. R. A. (2014). BIM execution planning in green building projects: LEED as a use case. Journal of Management in Engineering, 31(1), A4014007. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000314
  17. Wu, W. (2010). Integrating building information modeling and green building certification: The BIM-LEED application model development. University of Florida.