Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Fuel Injection Strategies on Wall Film Formation at Port Injection Gasoline Engine

포트분사식 가솔린엔진에서 연료분사전략이 Wall Film 생성에 미치는 영향 연구

  • 이지영 (한양대학교 융합기계공학과) ;
  • 최종휘 (한양대학교 융합기계공학과) ;
  • 장지환 (한양대학교 융합기계공학과) ;
  • 박성욱 (한양대학교 기계공학부)
  • Received : 2018.02.05
  • Accepted : 2018.03.26
  • Published : 2018.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Fuel wall film effects power output and cycle deviation by changing the amount of fuel flowing into cylinder in PFI gasoline engines. Reduction of wall film can reduce fuel consumption and improve combustion stability. In this research, the effects of injection strategies including injection pressure and dual injection system is investigated for reducing wall film formation. The CONVERGE software is used for numerical analysis tool and O'Rourke film splash model was used for wall film prediction model. Compared with the reference case wall film decreased with increase of injection pressures, and the film formation reduced when the dual injection system was used.

Keywords

References

  1. Ch. Schwarz, E. Schunemann, B. Durst, J. Fischer and A. Witt, "Potentials of the Spray-Guided BMW DI Combustion System", SAE International, 2006.
  2. Mike Braisher, Richard Stone and Phil Price, "Particle Number Emissions from a Range of European Vehicles", SAE International, 2010.
  3. Yasunori Sogawa, Hisaya Hattori, Tetsuya Yamashita, Nohuhiro Yanagisawa, Tomoaki Ikeda, Shigeyuki Tanaka, Mitsuru Hosoya, Ko Takahashi, Takeshi Shoji, Teruo Suzuke, Yasunori Iwakiri, Toru Nakajima and Yoshio Tonegawa, "Nano Particle Emission Evaluation of State of the Art Diesel Aftertreatment Technologies (DPF, urea-SCR and DOC), Gasoline Combustion Systems (Lean Burn / Stoichiometric DISI and MPI) and Fuel Qualities Effects (EtOH, ETBE, FAME, Aromatics and Distillation)", SAE international, 2007.
  4. Leonidas Ntziachristos, Athanasios Mamakos, Zissis Samaras, Urs Mathis, Martin Mohr, Neville Thompson, Richard Stradling, Laurent Forti and Claes de Serves, "Overview of the European 'Particulates' Project on the Characterization of Exhaust Particulate Emissions from Road Vehicles: Results for Light-Duty Vehicles", SAE international, 2004.
  5. M. C. Drake, T. D. Fansler, A. S. Solomon and G. A. Szekely, jr, "Piston Fuel Films as s Source of Smoke and Hydrocarbon Emission from a Wall-Controlled Spark-ignited Direct-Injection Engine", SAE international, 2003.
  6. Paolo Sementa, Blanca Maria Vaglieco and Francesco Catapano, "Thermodynamic and optical characterizations of a high performance GDI engine operating in homogeneous and stratified charge mixture conditions fueled with gasoline and bio-ethanol", Fuel, Vol. 96, 2012, pp. 204-219. https://doi.org/10.1016/j.fuel.2011.12.068
  7. Buyu Wang, Sebastian Mosbach, Sebastian Schmuzhard, Shijin Shuai, Yaqing Huang and Markus Kraft, "Modelling soof formation from wall films in a gasoline dierec injection engine using a detailed population balance model", Applied Energy, Vol. 163, 2016, pp. 154-166. https://doi.org/10.1016/j.apenergy.2015.11.011
  8. Hanzhengnan Yu, Xingyu Liang, Gequn Shu, Xiuxiu Sun and Hongsheng Zhang, "Experimental investigation on wall film ratio of diesel, butanol/diesel, DME/diesel and gasoline/diesel blended fuels during the spray wall impingement process", Fuel Processing Technology, Vol. 156, 2017, pp. 9-18. https://doi.org/10.1016/j.fuproc.2016.09.029
  9. P. J. O'Rourke and A. A. Amsden, "A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model", SAE international, 2000.
  10. Chr. MUNDO, M. SOMMERFELD and C. TROPEA, "Droplet-wall collisions: experimental Studies of the deformation and breakup process", International Journal of Multiphase flow, Vol. 21, 1995, pp. 151-173. https://doi.org/10.1016/0301-9322(94)00069-V