DOI QR코드

DOI QR Code

Determination of equivalent blasting load considering millisecond delay effect

  • Song, Zhan-Ping (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Li, Shi-Hao (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Wang, Jun-Bao (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Sun, Zhi-Yuan (Chinese Railway Bridge Engineering Bureau Group Co. Ltd.) ;
  • Liu, Jing (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Chang, Yu-Zhen (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2017.08.07
  • 심사 : 2017.11.29
  • 발행 : 2018.06.10

초록

In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Education Department of Shaanxi Provincial

참고문헌

  1. Ak, H., Iphar, M., Yavuz, M. and Konuk, A. (2009), "Evaluation of ground vibration effect of blasting operations in a magnesite mine", Soil Dyn. Earthq. Eng., 29(4), 669-676. https://doi.org/10.1016/j.soildyn.2008.07.003
  2. Banadaki, M.D. and Mohanty, B. (2012), "Numerical simulation of stress wave induced fractures in rock", J. Impact Eng., 40, 16-25.
  3. Cardu, M. and Seccatore, J. (2016), "Quantifying the difficulty of tunnelling by drilling and blasting", Tunn. Undergr. Sp. Technol., 60, 178-182. https://doi.org/10.1016/j.tust.2016.08.010
  4. Henrych, J. (1979), The Dynamics of Explosion and its Use, Elsevier Scientific Publishing Company, New York, U.S.A.
  5. Jiang, N. and Zhou, C. (2012), "Blasting vibration safety criterion for a tunnel liner structure", Tunn. Undergr. Sp. Technol., 32, 52-57. https://doi.org/10.1016/j.tust.2012.04.016
  6. Kuzu, C. and Guclu, E. (2009), "The problem of human response to blast induced vibrations in tunnel construction and mitigation of vibration effects using cautious blasting in half-face blasting rounds", Tunn. Undergr. Sp. Technol., 24(1), 53-61. https://doi.org/10.1016/j.tust.2008.02.001
  7. Li, X.L., Wang, E.Y., Li, Z.H., Bie, X.F., Chen, L., Feng, J.J. and Li, N. (2016), "Blasting wave pattern recognition based on Hilbert-Huang transform", Geomech. Eng., 11(5), 607-624. https://doi.org/10.12989/gae.2016.11.5.607
  8. Li, X.P., Chen, J.H., Li, Y.H. and Dai, Y.F. (2010), "Study of blasting seismic effects of underground chamber group in Xiluodu hydropower station", Chin. J. Rock Mech. Eng., 29(3), 494-500 (in Chinese).
  9. Ling, T.H. and Li, X.B. (2004), "Time-energy analysis based on wavelet transform for identifying real delay time in millisecond blasting", Chin. J. Rock Mech. Eng., 23(13), 2266-2270 (in Chinese).
  10. Lu, W.B., Yang, J.H., Chen, M. and Zhou, C.B. (2011), "An equivalent method for blasting vibration simulation", Simul. Model. Pract. Th., 19(9), 2050-2062. https://doi.org/10.1016/j.simpat.2011.05.012
  11. Lu, W.B., Yang, J. H., Yan, P., Chen, M., Zhou, C.B., Luo, Y. and Jin, L. (2012), "Dynamic response of rock mass induced by the transient release of in-situ stress", J. Rock Mech. Min. Sci., 53, 129-141. https://doi.org/10.1016/j.ijrmms.2012.05.001
  12. Ma, G.W. and An, X.M. (2008), "Numerical simulation of blasting-induced rock fractures", J. Rock Mech. Min. Sci., 45(6), 966-975. https://doi.org/10.1016/j.ijrmms.2007.12.002
  13. Nateghi, R., Kiany, M. and Gholipouri, O. (2009), "Control negative effects of blasting waves on concrete of the structures by analyzing of parameters of ground vibration", Tunn. Undergr. Sp. Technol., 24(6), 608-616. https://doi.org/10.1016/j.tust.2009.04.004
  14. Ozer, U. (2008), "Environmental impacts of ground vibration induced by blasting at different rock units on the Kadikoy-Kartal metro tunnel", Eng. Geol., 100(1), 82-90. https://doi.org/10.1016/j.enggeo.2008.03.006
  15. Ramulu, M., Chakraborty, A.K. and Sitharam, T.G. (2009), "Damage assessment of basaltic rock mass due to repeated blasting in a railway tunnelling project-A case study", Tunn. Undergr. Sp. Technol., 24(2), 208-221. https://doi.org/10.1016/j.tust.2008.08.002
  16. Resende, R., Lamas, L.N., Lemos, J.V. and Calcada, R. (2010), "Micromechanical modelling of stress waves in rock and rock fractures", Rock Mech. Rock Eng., 43(6), 741-761. https://doi.org/10.1007/s00603-010-0098-1
  17. Resende, R., Lamas, L., Lemos, J. and Calcada, R. (2014), "Stress wave propagation test and numerical modelling of an underground complex", J. Rock Mech. Min. Sci., 72, 26-36.
  18. Rodriguez, R., Torano, J. and Menendez, M. (2007), "Prediction of the airblast wave effects near a tunnel advanced by drilling and blasting", Tunn. Undergr. Sp. Technol., 22(3), 241-251. https://doi.org/10.1016/j.tust.2006.09.001
  19. Saharan, M.R. and Mitri, H.S. (2008), "Numerical procedure for dynamic simulation of discrete fractures due to blasting", Rock Mech. Rock Eng., 41(5), 641-670. https://doi.org/10.1007/s00603-007-0136-9
  20. Sainoki, A. and Mitri, H.S. (2014), "Numerical simulation of rock mass vibrations induced by nearby production blast", Can. Geotech. J., 51(11), 1253-1262. https://doi.org/10.1139/cgj-2013-0480
  21. Sanchidrian, J.A., Segarra, P. and Lopez, L.M. (2007), "Energy components in rock blasting", J. Rock Mech. Min. Sci., 44(1), 130-147. https://doi.org/10.1016/j.ijrmms.2006.05.002
  22. Song, Z.P., Yang, T.T. and Jiang, A.N. (2016), "Elastic-plastic numerical analysis of tunnel stability based on the closest point projection method considering the effect of water pressure", Math. Prob. Eng., 1-12.
  23. Wang W.L. (1984), Drill and Blasting, Coal Industry Press, Beijing, China (in Chinese).
  24. Wu, Z., Liang, X. and Liu, Q. (2015), "Numerical investigation of rock heterogeneity effect on rock dynamic strength and failure process using cohesive fracture model", Eng. Geol., 197, 198-210. https://doi.org/10.1016/j.enggeo.2015.08.028
  25. Yang, J., Lu, W., Chen, M., Yan, P. and Zhou, C. (2013), "Microseism induced by transient release of in situ stress during deep rock mass excavation by blasting", Rock Mech. Rock Eng., 46(4), 859-875. https://doi.org/10.1007/s00603-012-0308-0
  26. Yilmaz, O. and Unlu, T. (2013), "Three dimensional numerical rock damage analysis under blasting load", Tunn. Undergr. Sp. Technol., 38, 266-278. https://doi.org/10.1016/j.tust.2013.07.007

피인용 문헌

  1. Optimization Analysis of Controlled Blasting for Passing through Houses at Close Range in Super-Large Section Tunnels vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/1941436
  2. A New Method for Predicting Ground Settlement Induced by Pipe Jacking Construction vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/1681347
  3. A Theoretical Calculation Method of Influence Radius of Settlement Based on the Slices Method in Tunnel Construction vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/5804823
  4. Frequency Spectrum and Wavelet Packet Analyses of Blasting Vibration Signals for Different Charge Structures in Blasting Peripheral Holes vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8897441
  5. Dynamic stability analysis of rock tunnels subjected to impact loading with varying UCS vol.24, pp.6, 2018, https://doi.org/10.12989/gae.2021.24.6.505
  6. Investigation of blasting impact on limestone of varying quality using FEA vol.25, pp.2, 2018, https://doi.org/10.12989/gae.2021.25.2.111