DOI QR코드

DOI QR Code

The actuation equation of macro-fiber composite coupled plate and its active control over the vibration of plate and shell

  • Tu, Jianwei (Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology) ;
  • Zhang, Jiarui (Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology) ;
  • Zhu, Qianying (Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology) ;
  • Liu, Fan (Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology) ;
  • Luo, Wei (Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology)
  • Received : 2018.02.13
  • Accepted : 2018.03.23
  • Published : 2018.06.25

Abstract

Plate and shell structure is widely applied in engineering, i.e. building roofs, aircraft wings, ship platforms, and satellite solar arrays. Its vibration problem has become increasingly prominent due to the tendency of lightening, upsizing and flexibility. As a new smart material with great actuating force and toughness, macro-fiber composite (MFC) is composed of piezoelectric fiber and epoxy resin basal body, which can be directly pasted onto the surface of plate and shell and is suitable for vibration control. This paper deduces the actuation equation of MFC coupled plate in different boundary conditions, an equivalent finite element modeling method is proposed which uses MFC actuating force as the applied excitation, and on this basis the active control simulation and experiment of MFC over plate and shell structure vibration are accomplished. The results indicate that MFC is able to implement effective control over plate and shell structure vibration in multi-band range. The comparison between experiment and simulation proves that the actuation equation deduced herein, effective and practicable, can be applied into the simulation calculation of MFC vibration control over plate and shell structure.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Natural Science Foundation of Hubei Province, Central Universites

References

  1. Bilgen, O., Erturk, A. and Inman, D.J. (2010), "Analytical and experimental characterization of macro-fiber composite actuated thin clamped-free unimorph benders", J. Vib. Acoust., 132(5), 051005. https://doi.org/10.1115/1.4001504
  2. Deraemaeker, A., Nasser, H., Benjeddou, A. and Preumont, A. (2009), "Mixing rules for thepiezoelectric properties of macro fiber composites", J. Intel. Mat. Syst. Str., 20(12), 1475-1482. https://doi.org/10.1177/1045389X09335615
  3. Kim, H.S., Sohn, J.S. and Choi, S.B. (2011), "Vibration control of a cylindrical shell structure using macro fiber composite actuators", Mech. Based. Des. Struc., 39(4), 491-506. https://doi.org/10.1080/15397734.2011.577691
  4. Kumar, G.V., Raja, S., Prasanna, K.B. and Sudha V. (2012), "Finite element analysis and vibration control of a deep composite cylindrical shell using MFC actuators", Smart Mater. Res., http://dx.doi.org/10.1155/2012/513271.
  5. Kwak, M.K., Heo, S. and Jeong, M. (2009), "Dynamic modeling and active vibration controller design for a cylindrical shell equipped with piezoelectric sensors and actuators", J. Sound Vib., 321(3-5), 510-524. https://doi.org/10.1016/j.jsv.2008.09.051
  6. Ma, G., Xu, M., An, Z., Wu, C. and Miao, W. (2016), "Active vibration control of an axially moving cantilever structure using MFC", Int. J. Appl. Eelectrom., 52(3), 967-974.
  7. Prasath, S.S. and Arockiarajan, A. (2013), "Effective electromechanical response of macro-fiber composite (MFC): analytical and numerical models", Int. J. Mech. Sci., 77(77), 98-106. https://doi.org/10.1016/j.ijmecsci.2013.09.031
  8. Prasath, S.S. and Arockiarajan, A. (2014), "Analytical, numerical and experimental predictions of the effective electromechanical properties of macro-fiber composite (MFC)", Sensor Actuat A-Phys., 214(4), 31-44. https://doi.org/10.1016/j.sna.2014.04.008
  9. Sohn, J.W. and Choi, S.B. (2014), "Active vibration control of a cylindrical structure using flexible piezoactuators: experimental work in air and water environments", Smart Mater. Struct., 23(11), 117002(9pp). https://doi.org/10.1088/0964-1726/23/11/117002
  10. Steiger, K. and Mokry, P. (2015), "Finite element analysis of the Macro Fiber Composite actuator: Macroscopic elastic and piezoelectric properties and active control thereof by means of negative capacitance shunt circuit", Smart Mater. Struct., 24(2), 25-51.
  11. Williams, R.B., Park, G., Inman, D.J. and Wilkie, W.K. (2002), "An overview of composite actuators with piezoceramic fibers", Proceedings of the 20th International Modal Analysis Conference, Los Angles, United States, February.
  12. Yi, G., Liu, Y. and Leng, J. (2011), "Active vibration control of basic structures using macro fiber composites", Proceedings of SPIE - The International Society for Optical Engineering, California, United States, March.
  13. Zhang, S.Q., Li Y.X. and Schmidt, R. (2015), "Modeling and simulation ofmacro-fiber composite layered smart structures", Compos. Struct., 126, 89-100. https://doi.org/10.1016/j.compstruct.2015.02.051
  14. Zhao, J., Man, X., Xue, X., Sun, Q. and Zhang, L. (2014), "Numerical research on electro-elastic properties of the macro fiber composite (MFC) actuators", Int. J. Appl. Eelectrom., 45 (1), 409-415.

Cited by

  1. Numerical forced vibration analysis of compositionally gradient porous cylindrical microshells under moving load and thermal environment vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.893