DOI QR코드

DOI QR Code

A new strain-based criterion for evaluating tunnel stability

  • Daraei, Ako (Faculty of Mining, Petroleum and Geophysics Engineering, Shahrood University of Technology) ;
  • Zare, Shokrollah (Faculty of Mining, Petroleum and Geophysics Engineering, Shahrood University of Technology)
  • 투고 : 2017.09.30
  • 심사 : 2018.06.12
  • 발행 : 2018.10.10

초록

Strain-based criteria are known as a direct method in determining the stability of the geomechanical structures. In spite of the widely use of Sakurai critical strain criterion, it is so conservative to make use of them in rocks with initial plastic deformation on account of the considerable difference between the failure and critical strains. In this study, a new criterion has been developed on the basis of the failure strain to attain more reasonable results in determining the stability status of the tunnels excavated in the rocks mostly characterized by plastic-elastic/plastic behavior. Firstly, the stress-strain curve was obtained having conducted uniaxial compression strength tests on 91 samples of eight rock types. Then, the initial plastic deformation was omitted making use of axis translation technique and the criterion was presented allowing for the modified secant modulus and by use of the failure strain. The results depicted that the use of failure strain criterion in such rocks not only decreases the conservativeness of the critical strain criterion up to 42%, but also it determines the stability status of the tunnel more accurately.

키워드

참고문헌

  1. Abdullah, R.A. and Amin, M. (2008), "Verification of post failure behavior of rock using closed-circuit servo-controlled testing machine", Bull. Geol. Soc. Malaysia, 54, 17-20.
  2. ASCE (1996), Rock Foundations: Technical Engineering and Design Guides as Adapted from the US Army Corps of Engineers, No. 16, ASCE Press, New York, U.S.A.
  3. ASTM (2004), Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, Pennsylvania, U.S.A.
  4. Aydan, O., Akagi, T. and Kawamoto, T. (1993), "The squeezing potential of rock around tunnels: Theory and prediction", Rock Mech. Rock. Eng., 26(2), 137-163. https://doi.org/10.1007/BF01023620
  5. Barla, G. (2001), Tunnelling Under Squeezing Rock Conditions, in Tunnelling Mechanics-Advances in Geotechnical Engineering and Tunneling, Logos Verlag Berlin, Innsbruck, 169-268.
  6. Bieniawski, Z.T. and Bernede, M.J. (1979), "Suggested methods for determining the uniaxial compressive strength and deformability of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 16(2), 138-140. https://doi.org/10.1016/0148-9062(79)91451-7
  7. Bogusz, A. and Bukowska, M. (2015), "Stress-strain characteristics as a source of information on the destruction of rocks under the influence of load", J. Sustain. Min., 14(1), 46-54. https://doi.org/10.1016/j.jsm.2015.08.007
  8. British Tunnelling Society (2004), Tunnel Lining Design Guide, British Tunneling Society and the Institution of Civil Engineers, Thomas Telford.
  9. Brown, E.T. (1981), Rock Characterization, Testing and Monitoring, Pergamon Press.
  10. Bukowska, M. (2013), "Post-peak failure modulus in problems of mining geo-mechanics", J. Min. Sci., 49(5), 731-740. https://doi.org/10.1134/S1062739149050067
  11. Cai, M. (2011), "Rock mass characterization and rock property variability considerations for tunnel and cavern design", Rock Mech. Rock Eng., 44(4), 379-399. https://doi.org/10.1007/s00603-011-0138-5
  12. Cai, M., Kaiser, P.K., Tasaka, Y. and Minami, M. (2007), "Determination of residual strength parameters of jointed rock masses using the GSI system", Int. J. Rock Mech. Min. Sci., 44(2), 247-265. https://doi.org/10.1016/j.ijrmms.2006.07.005
  13. Chern, J.C., Yu, C.W. and Shiao, F.Y. (1998), "Tunnelling in squeezing ground and support estimation", Proceedings of the Regional Symposium on Sedimentary Rock Engineering, Taipei, Taiwan, November.
  14. Cui, L., Zheng, J., Dong, Y. and Zhang, B. and Wang, A. (2017), "Prediction of critical strains and critical support pressures for circular tunnel excavated in strain-softening rock mass", Eng. Geol., 224, 43-61. https://doi.org/10.1016/j.enggeo.2017.04.022
  15. Cuisiat, F.D. and Haimson, B.C. (1992), "Scale effects in rock mass stress measurements", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 29(2), 99-117. https://doi.org/10.1016/0148-9062(92)92121-R
  16. Daraei, A. and Zare, S. (2018), "Effect of water content variations on critical and failure strains of rock", KSCE J. Civ. Eng., 22(9), 3331-3339
  17. Deere, D.U. and Miller, R.P. (1966), Engineering Classification and Index Properties for Intact Rock, Technical Report No. AFWL-TR-65-116, Air Force Weapons Laboratory, New Mexico, U.S.A.
  18. Eberhardt, E., Stead, D., Stimpson, B. and Read, R. (1998), "Identifying crack initiation and propagation thresholds in brittle rocks", Can. Geotech. J., 35(2), 222-233. https://doi.org/10.1139/t97-091
  19. Fujii, Y., Kiyama, T. and Ishijima, Y. (1994), "A new criterion for brittle failure of rock", Proceedings of the MMIJ/AusIMM Joint Symposium '94, Ube, Japan.
  20. Fujii, Y., Kiyama, T., Ishijimay, Y. and Kodama, J. (1998), "Examination of a rock failure criterion based on circumferential tensile strain", Pure Appl. Geophys., 152(3), 551-577. https://doi.org/10.1007/s000240050167
  21. Hajiabdolmajid, V. and Kaiser, P. (2003), "Brittleness of rock and stability assessment in hard rock tunneling", Tunn. Undergr. Sp. Technol., 18(1), 35-48. https://doi.org/10.1016/S0886-7798(02)00100-1
  22. Han, J.X., Li, S.C., Li, S.C. and Lei, W. (2012), "Post-peak stressstrain relationship of rock mass based on hoek-brown strength criterion", Proc. Earth Planet. Sci., 5, 289-293. https://doi.org/10.1016/j.proeps.2012.01.049
  23. Heuze, F.E. (1980), "Scale effects in the determination of rock mass strength and deformability", Rock Mech., 12(3-4), 167-192. https://doi.org/10.1007/BF01251024
  24. Hoek, E. (2001), "Big tunnel in bad rock", J. Geotech. Geoenviron. Eng., 127(9), 726-740. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:9(726)
  25. Hoek, E. and Diederichs, M.S. (2006), "Empirical estimation of rock mass modulus", Int. J. Rock Mech. Min. Sci., 43(2), 203-215. https://doi.org/10.1016/j.ijrmms.2005.06.005
  26. Kim, Y.S. and Kim, D.M. (2009), "Evaluation for applications of displacement criterion by the critical strain of uniaxial compression in rock mass Tunnel", J. Kor. Civ. Eng., 29(6C), 321-329
  27. Kwasniewski, M. and Takahashi, M. (2010), "Strain-based failure criteria for rocks: State of the art and recent advances", Proceedings of the ISRM International Symposium-EUROCK 2010, Lausanne, Switzerland, June.
  28. Li, J. and Villaescusa, E. (2005), "Determination of rock mass compressive strength using critical strain theory", Proceedings of the 40th U.S. Rock Mechanics Symposium, Anchorage, Alaska, U.S.A., June.
  29. Li, X., Wu, Z., Takahashi, M. and Yasuhara, K. (2000), "An experimental study on strain-based failure criteria of brittle materials", J. Appl. Mech., 3, 387-394. https://doi.org/10.2208/journalam.3.387
  30. Li, Z. (1990), "A new approach to rock failure: Criterion of failure in plastical strain space", Eng. Fract. Mech., 35(4-5), 139-742.
  31. Nadai, A. (1950), Theory of Flow and Fracture of Solids, McGraw-Hill Book Co., Inc., New York, U.S.A.
  32. Nickolson, G.A. (1985), Rock Failure Criteria for Design of Underground Structural Supports, Technical report GL-85-19, US Army Engineer Waterways Experiment Station.
  33. Nicksiar, M. and Martin, C.D. (2012), "Evaluation of methods for determining crack initiation in compression tests on lowporosity rocks", Rock Mech. Rock. Eng., 45(4), 607-617. https://doi.org/10.1007/s00603-012-0221-6
  34. Park, S. and Park, S. (2014), "Case studies for tunnel stability based on the critical strains in the ground", KSCE J. Civ. Eng., 18(3), 765-771. https://doi.org/10.1007/s12205-014-0337-1
  35. Park, S.H., Ha, M.H., Park, G.R. and Shin, Y.S. (2008), "A study on safety assessment technique of tunnel using critical strain", Proceedings of the World Tunnel Congress, Agra, India, September.
  36. Peng, J., Rong, G., Cai, M. and Zhou, C. (2015), "A model for characterizing crack closure effect of rocks", Eng. Geol., 189, 48-57.
  37. Sakurai, S. (1981), "Direct strain evaluation technique in construction of underground opening", Proceedings of the 22nd U.S. Symposium on Rock Mechanics, Cambridge, Massachusetts, U.S.A., June-July.
  38. Sakurai, S. (1983), "Displacement measurements associated with the design of underground openings", Proceedings of the International Symposium on Field Measurements in Geomechanics. Zurich, Switzerland.
  39. Sakurai, S. (1986), "Field measurement and hazard warning levels in NATM", Tsuchi-To-Kiso JSSMFE, 34(337), 5-10.
  40. Sakurai, S. (1997), "Lesson learned from field measurement in tunneling", Tunn. Undergr. Sp. Technol., 12(4), 453-460. https://doi.org/10.1016/S0886-7798(98)00004-2
  41. Santi, P., Holschen, J. and Stephenson, R. (2000), "Improving elastic modulus measurements for rock based on geology", Environ. Eng. Geosci., 6(4),333-346. https://doi.org/10.2113/gseegeosci.6.4.333
  42. Singh, M., Singh, B. and Choudhari, J. (2007), "Critical strain and squeezing of rock mass in tunnels", Tunn. Undergr. Sp. Technol., 22(3), 343-350.
  43. Stacey, T.R. (1981), "A simple extension strain criterion for fracture of brittle rock", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 18(6), 469-474. https://doi.org/10.1016/0148-9062(81)90511-8
  44. Wang, L., Wang, H. and Jiang, L. (2014), "Study of post-peak stress-strain relationship of rock mass with joint", Appl. Mech. Mater., 638, 561-564.
  45. Wawersik, W.R. and Fairhurst, C. (1970), "A study of brittle rock fracture in laboratory compression experiments", Int. J. Rock Mech. Min. Sci., 7(6), 561-575.
  46. Wesseloo, J. and Stacey, T.R. (2016), "A Reconsideration of the extension strain criterion for fracture and failure of rock", Rock Mech. Rock Eng., 49(12), 4667-4679. https://doi.org/10.1007/s00603-016-1059-0
  47. Yim, S.B., Seo, Y.S., Kim, C.Y. and Kim, K.Y. (2011), "Critical strain concept-based method for pre evaluation of tunnel face safety using RMR", Proc. Eng., 14, 3147-3150. https://doi.org/10.1016/j.proeng.2011.07.396
  48. Zhang, Q., Zhu, H., Zhang, L. and Ding, X. (2011), "Study of scale effect on intact rock strength using particle flow modeling", Int. J. Rock Mech. Min. Sci., 48(8), 1320-1328. https://doi.org/10.1016/j.ijrmms.2011.09.016
  49. Zhang, W.G. and Goh, A.T.C. (2015), "Regression models for estimating ultimate and serviceability limit states of underground rock caverns", Eng. Geol., 188, 68-76.

피인용 문헌

  1. Modifying Tunnel’s Hazard Warning Levels based on the Laboratory Studies on Different Rock Types vol.23, pp.5, 2018, https://doi.org/10.1007/s12205-019-0326-5