대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제34권9호
  • /
  • Pages.3-10
  • /
  • 2018
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

구조설계실무 현황을 고려한 전단벽 해석모형에 관한 고찰

A Study on the Analytical Model of Shear Wall Considering the Current Status of Structural Design

  • 정성진 (한남대학교 토목.건축공학부(건축공학전공))
  • Jung, Sung-Jin (Department of Architectural Engineering, Hannam University)
  • 투고 : 2018.04.26
  • 심사 : 2018.08.30
  • 발행 : 2018.09.30
⟨ 이전 논문 다음 논문 ⟩

초록

While computer environments have been dramatically developed in recent years, as the building structures become larger, the structural analysis models are also becoming more complex. So there is still a need to model one shear wall with one finite element. From the viewpoint of the concept of FEA, if one shear wall is modeled by one finite element, the result of analysis is not likely accurate. Shear wall may be modelled with various finite elements. Among them, considering the displacement compatibility condition with the beam element connected to the shear wall, plane stress element with in-plane rotational stiffness is preferred. Therefore, in order to analyze one shear wall with one finite element accurately, it is necessary to evaluate finite elements developed for the shear wall analysis and to develop various plane stress elements with rotational stiffness continuously. According to the above mentioned need, in this study, the theory about a plane stress element using hierarchical interpolation equation is reviewed and stiffness matrix is derived. And then, a computer program using this theory is developed. Developed computer program is used for numerical experiments to evaluate the analysis results using commercial programs such as SAP2000, ETABS, PERFORM-3D and MIDAS. Finally, the deflection equation of a cantilever beam with narrow rectangular section and bent by an end load P is derived according to the elasticity theory, and it is used to for comparison with theoretical solution.

키워드

과제정보

연구 과제 주관 기관 : 한남대학교

참고문헌

  1. Timoshenko, S., & Goodier, J.N. (1951). Theory of Elasticity, McGraw-Hill, New York
  2. Saada, A.S. (1974). Elasticity-Theory and Applications, Pergamon Press Inc.
  3. Bathe, Klaus-Jurgen (1996). Finite Element Procedures, Prentice Hall
  4. Cook, R.D., Malkus, D.S., Plesha, M.E., & Witt, R.J., (2001). Concepts and Applications of Finite Element Analysis, Fourth Edition, John Wiley & Sins, Inc.
  5. Zienkiewicz, O.C., Taylor, R.L., & Zhu, J.Z. (2005). The Finite Element Method - Its Basis & Fundamentals, Elsevier Butterworth-Heinemann
  6. MacNeal, R.H., & Harder, R.L. (1988). A refined four-node membrane element with rotational degrees of freedom, Computers and Structures, VOl. 18
  7. Wilson, E. L., & Ibrahimbegovic, A. (1990). Use of incompatible displacement modes for the calculation of element stiffnesses and stresses, J. Finite Elem. Anal. Design
  8. Ibrahimbegovic, A. (1990). A novel membrane element with enhanced displacement interpolation, J, Finite Elem. Anal. Design
  9. Ibrahimbegovic, A., & Wilson, E.L. (1991). Unified formulation for triangular and quadrilateral flat shell finite elements with six nodal degrees of freedom, Int. j. numer. methods eng.
  10. Ibrahimbegovic, A., Taylor, R. L., & Wilson, E.L. (1991). A robust membrane quadrilateral flat shell finite elements with six nodal degrees of freedom, Commun. Appl. Numer. Methods
  11. Ibrahimbegovic, A., & Wilson, E.L. (1991). THICK SHELL AND SOLID FINITE ELEMENTS WITH INDEPENDENT ROTATIONAL FIELDS, INT. JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, VOL. 31
  12. Jung, S.J, Lee, M.S., & Park, S.H. (2012). A Computer Program Algorithm for Realizing Quadrilateral Plane Element, Journal of the Architectural Institute of Korea, Structure Section, 28(4), 65-73
  13. Computers and Structures, Inc. (1998). SAP2000-ANALYSIS REFERENCE, Ver. 7.0
  14. MIDAS/Civil, http://www.midasit.com/
  15. Computers and Structures, Inc. (2011). User Guide PERFORM-3DTM-Nonlinear Analysis and Performance Assessment for 3D Structures
  16. Computers and Structures, Inc. (2015). ETABS-Analysis Reference Manual
  17. Computers and Structures, Inc. (2015). ETABS-Software Verification Examples