DOI QR코드

DOI QR Code

Location determining method of critical sliding surface of fillings in a karst cave of tunnel

  • Lin, P. (School of Qilu Transportation, Shandong University) ;
  • Li, S.C. (School of Qilu Transportation, Shandong University) ;
  • Xu, Z.H. (School of Qilu Transportation, Shandong University) ;
  • Huang, X. (School of Qilu Transportation, Shandong University) ;
  • Pang, D.D. (School of Qilu Transportation, Shandong University) ;
  • Wang, X.T. (School of Qilu Transportation, Shandong University) ;
  • Wang, J. (School of Qilu Transportation, Shandong University)
  • 투고 : 2018.06.04
  • 심사 : 2018.07.30
  • 발행 : 2018.11.20

초록

A location determining method is proposed for critical sliding surface in the stability analysis of the filling materials in karst caves. First, a preliminary location of the sliding surface is determined based on simulation results which includes displacement contour and plastic zone. The sliding surface will locate on the bottom contact interface when the friction angle is relative small. However, a weakened contact interface always becomes the critical sliding surface no matter what the friction angle is. Then when the friction angle becomes larger, the critical sliding surface inside fillings can be determined by a parabola, the coefficient of which increases linearly with the friction angle under the same cohesion. Finally, the critical sliding surface approximately remains unchanged with friction angle. The influence of cohesion is similar to that of friction angle. Although affected by shape, size or position of the karst cave, the critical sliding surface mainly depends on both friction angle and cohesion. Thus, this method is always useful in determining the critical sliding surface.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Shandong Provincial Natural Science Foundation, China Postdoctoral Science Foundation, Shandong University

참고문헌

  1. Aliha, M.R.M., Ayatollahi, M.R., Smith, D.J. and Pavier, M.J. (2010), "Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading", Eng. Fract. Mech., 77(11), 2200-2212. https://doi.org/10.1016/j.engfracmech.2010.03.009
  2. Barpi, F., Barbero, M. and Peila, D. (2011), "Numerical modelling of ground-tunnel support interaction using bedded-beam-spring model with fuzzy parameters", Gospodarka Surowcami Mineralnymi, 27, 71-87.
  3. Carrier, B. and Granet, S. (2012), "Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model", Eng. Fract. Mech., 79, 312-328.
  4. Damjanac, B., Gil, I., Pierce, M., Sanchez, M., Van As, A. and McLennan, J. (2010), "A new approach to hydraulic fracturing modeling in naturally fractured reservoirs", Proceedings of the 44th US Rock Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, Salt Lake City, Utah, U.S.A., June.
  5. Gandomi, A.H., Kashani, A. R., Mousavi, M. and Jalalvandi, M. (2015), "Slope stability analyzing using recent swarm intelligence techniques", Int. J. Numer. Anal. Meth. Geomech., 39(3), 295-309. https://doi.org/10.1002/nag.2308
  6. Gandomi, A.H. (2014), "Interior search algorithm (ISA): A novel approach for global optimization", ISA Transact., 53(4), 1168-1183. https://doi.org/10.1016/j.isatra.2014.03.018
  7. Guerriero, L., Coe, J.A., Revellino, P., Grelle, G., Pinto, F. and Guadagno, F.M. (2014), "Influence of slip-surface geometry on earth-flow deformation, Montaguto earth flow, southern Italy", Geomorphology, 219, 285-305.
  8. Hajiazizi, M. and Tavana, H. (2013), "Determining three-dimensional non-spherical critical slip surface in earth slopes using an optimization method", Eng. Geol., 153, 114-124. https://doi.org/10.1016/j.enggeo.2012.11.014
  9. Hoefsloot, F.J.M. (2008), "Analytical solution longitudinal behaviour tunnel lining", Proceedings of the 6th International Symposium on Underground Construction in Soft Ground, Shanghai, China, April.
  10. Kashani, A.R., Gandomi, A.H. and Mousavi, M. (2016), "Imperialistic competitive algorithm: A metaheuristic algorithm for locating the critical slip surface in 2-dimensional soil slopes", Geosci. Front., 7(1), 83-89. https://doi.org/10.1016/j.gsf.2014.11.005
  11. Khajehzadeh, M., Raihan Taha, M., El-Shafie, A. and Eslami, M. (2012a), "Locating the general failure surface of earth slope using particle swarm optimisation", Civ. Eng. Environ. Syst., 29(1), 41-57.
  12. Khajehzadeh, M., Taha, M. R., El-Shafie, A. and Eslami, M. (2011), "Search for critical failure surface in slope stability analysis by gravitational search algorithm", Int. J. Phys. Sci., 6(21), 5012-5021.
  13. Khajehzadeh, M., Taha, M.R., El-Shafie, A. and Eslami, M. (2012b), "A modified gravitational search algorithm for slope stability analysis", Eng. Appl. Artif. Intel., 25(8), 1589-1597. https://doi.org/10.1016/j.engappai.2012.01.011
  14. Khosravi, M. and Khabbazian, M. (2012), "Presentation of critical failure surface of slopes based on the finite element technique", Proceedings of the GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, Oakland, California, U.S.A., March.
  15. Li S.C., Lin P., Xu Z.H., Li, L.P., Guo, M., Sun, C.Q., Wang, J. and Song, S.G. (2015), "The minimum safety thickness of water and mud inrush induced by filled-type, karst water bearing structures based on the concept of slice method", Rock Soil Mech., 7, 1989-1994.
  16. Lin, P., Li, S.C., Xu, Z.H., Li, L.P., Huang, X. and He, S.J. (2016), "Analysis of stability of mud inrush induced by fillings sliding failure in karst cave based on the simplified Bishop Method and its application", Proceedings of the Geo-China 2016: Emerging Technologies in Tunnel Engineering, Modeling, Design, Construction, Repair, and Rehabilitation, Shandong, China, July.
  17. Mazaheri, A.R. (2015), "Use of line segments slip surface for optimized design of piles in stabilization of the earth slopes", Int. J. Civ. Eng., 13(1), 14-27.
  18. Metya, S. and Bhattacharya, G. (2014), "Probabilistic critical slip surface for earth slopes based on the first order reliability method", Indian Geotech. J., 44(3), 329-340. https://doi.org/10.1007/s40098-013-0089-8
  19. Regmi, R.K. and Jung, K. (2016), "Application of dynamic programming to locate the critical failure surface in a rainfall induced slope failure problem", KSCE J. Civ. Eng., 20(1), 452-462. https://doi.org/10.1007/s12205-015-0183-9
  20. Rutqvist, J., Wu, Y.S., Tsang, C.F. and Bodvarsson, G. (2002), " A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock", Int. J. Rock Mech. Min. Sci., 39(4), 429-442. https://doi.org/10.1016/S1365-1609(02)00022-9
  21. Serdar, K., Tomas M., Fernandez, S. and Rafig, A. (2015), "A numerical study on the Seepage failure by heave in sheeted excavation pits", Geomech. Eng., 9(4), 513-530. https://doi.org/10.12989/gae.2015.9.4.513
  22. Yamin, M. and Liang, R.Y. (2010), "Limiting equilibrium method for slope/drilled shaft system", Int. J. Numer. Anal. Meth. Geomech., 34(10), 1063-1075. https://doi.org/10.1002/nag.852
  23. Yang, X.L. and Yan, R.M. (2015), "Collapse mechanism for deep tunnel subjected to seepage force in layered soils". Geomech. Eng., 8(5), 741-756. https://doi.org/10.12989/gae.2015.8.5.741