DOI QR코드

DOI QR Code

A Study on the Characteristics of Low Temperature sintering Ceramic Siding Using Natural Minerals

천연광물을 활용한 저온소결 세라믹 사이딩의 특성에 관한 연구

  • Received : 2019.09.09
  • Accepted : 2019.11.26
  • Published : 2019.12.30

Abstract

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

Keywords

Acknowledgement

Supported by : 중소벤처기업부

이 연구는 2018년도 중소벤처기업부 지역유망 중소기업의 연구비 지원에 의한 결과의 일부임. 과제번호: S2664816

References

  1. Kim, H.S., Jung, Y.H., & Park, S.G. (2019). An Experimental Study on the Surface Gloss of Cement Matrix Using Industrial By-Products, Journal of the Korean Recycled Resources Institute, Vol.19 n.1(2019-04), 162-164.
  2. Moon, J.W., & Lim, S.H. (2015). A Study on Flame Resistance of Lightweight Panel with Coating Bottom Ash, Journal of the residential Environment Institute of Korea, 13(4), 211-219.
  3. Lee, H.S., Kim, S.H., & Choi, J.M. (2018). A Study on the Natural Cooling Effect by Ventilation Control Mode of Window at School Classroom, Journal of the Korean Solar Society of Korea, 38(04), 67-76. https://doi.org/10.7836/kses.2018.38.4.067
  4. Kim, S.H., Hong, S.W., Lee, D.K., Kim, S.W., Shin, C.H., & Kim, K.T. (2010). On Study of the Energy Analysis with Mock-Up House to HIP Green Home. Journal of the Architectural Institute of Korea, n(01), 507-510. A hierarchical model of housing choice, Urban Studies, V. 2010, n 01, 575-578.
  5. Kim, S.H., Soung, J.K., & Lee, H.R. (2008). A Study for Prevent Condensation at Coner Copulas in Outer Wall of Apartment Building, Journal of the Architectural Institute of Korea, N(01). 507-510.
  6. Kim, S.H. (2004). The Study on development of porous Lightweight construction materials with the Hwangto, Kyeongsang National University, 04-05.
  7. Kim. S.H., & Kim. H.Y. (2007). A Study on the Physical Properties of MgO Board for Wall System, Journal of the Korea Institute of Ecological Architecture and Environment, 7(4), 135-140.
  8. Lee, P.G, Choi, I.C., & Kim, H.S. (2003). A Study on the Application of the Fire Load Energy Density of Building Occupancy for Architectural Fire Safety, Journal of the Architectural Institute of Korea, 19(171), 259-260.
  9. Bang, H.C., Koo, C.W., Yeon, H.J., Hong, T.H., Hyun, C.T., & Koo, K.J. (2007). Life-Cycle Performance Model for Selecting a Exterior Cladding in the Design Phase, Journal of the Architectural Institute of Korea, 23(220), 75-76.
  10. Kim, E.H., Yeo, H.J., & Lee, Y.K. (2016). A Study on reasonable policy direction for strengthening building Safety, AURI No.03(2016-10), 145-190.
  11. Kang, C.S., & Kim, S.H.(2008). A Study on the Site Application Properties which is Hwangto Autoclave Lightweight Concrete as the Apartment House Non-bearing Outer Wall, Journal of the Architectural Institute of Korea Structure & Construction. 498-500
  12. Kim, S.H., Choi, H.Y., & Bae, W.T. (2002). An Experimental Study on the Physical and Hygroscopical Properties of Autoclaved Lightweight Concrete(ALC) with Hwangto Powder. Journal of the Architectural Institute of Korea, 18(1), 75-76.
  13. Kang, S.H., Hang, J.K., & Kwon, Y.H.(2019). Effects of Amount of Slaking Water on Physical and Chemical Properties of Handmade Hydrated Lime used for Preservation of Architectural Heritage, Journal of the Architectural Institute of Korea Structure & Construction. 18(1), 75-76.