Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Various Replacing Ratios of SCMs on Properties of High Fluidity Concrete

광물질 혼화재의 치환율 변화가 고유동 콘크리트의 특성에 미치는 영향

  • Han, In-Deok (Department of Architectural Engineering, jeju National University)
  • Received : 2019.10.16
  • Accepted : 2019.12.16
  • Published : 2019.12.30
⟨ Previous Next ⟩

Abstract

The aim of the research is to evaluate the influence of various replacing ratios of supplementary cementitious materials(SCMs) such as fly ash(FA), blast furnace slag(BS), and both FA and BS on general properties including segregation resistance as a powder based high fluidity concrete of normal strength grade with water-to-cement ratio 0.40. Specifically, by replacing the SCMs with low density powders, it was assessed that the decreased segregation resistance due to the decreased viscosity by J-ring test. As a result of the experiment, from the general test, the mixtures with SCMs showed increased segregation resistance by increased viscosity as the references, while some segregation was shown from J-ring test due to the decreased density of fresh state mixture related with the capacity of delivering coarse aggregate.

본 연구는 물결합재비 40 %인 일반강도 영역에서 FA, BS 및 FA+BS인 광물질 혼화재의 0~30 %의 치환율 변화가 분체계 고유동 콘크리트의 재료분리 저항성 등 제반 특성에 미치는 영향에 대하여 분석하였다. 특히 고유동 콘크리트에서 밀도가 작은 분체의 치환율을 증가시킬 경우 액상 콘크리트의 점성저하로 재료분리가 증대될 수 있지 않은지, 또한 J-ring시험으로 철근 장애부에 의한 재료분리 정도에는 영향을 미치지 않을지 등 제반특성을 검토 분석하였다. 실험연구 결과 Normal 시험의 경우는 기존의 이론과 같이 광물질 혼화재의 치환율이 증가할수록 레올로지적 측면의 점성증가로 재료분리가 방지되었다. 단, J-ring를 이용한 시험의 경우는 액상중 밀도저하로 양호하게 골재를 끌고 철근사이를 통과하지 못해 재료분리 방지에 큰 역할을 하지 못함을 알 수 있었다.

Keywords

Acknowledgement

Supported by : 제주대학교

이 논문은 2018년도 제주대학교 교원성과지원사업 지원에 의하여 연구되었음 이에 감사드립니다.

References

  1. Kang, B. (2001). The present status on mix design construction technology of high-fluidity concrete. Journal of the Korea Concrete Institue, 13(2), 86-90.
  2. Won, J., & Shin, Y. (2000). Durability characteristics of controlled low strength material(flowable fill) with high volume fly ash content. Journal of the Korea Concrete Institue, 12(1), 113-126.
  3. Kim, E., Park, C., Choi, J., Jeon, C., & Lee, H. (2003). Properties of self-compacting concrete using ground granulated blast furnace slag and fly ash. Journal of the Korea Concrete Institue, 15(1), 89-95 [in Korean].
  4. Korea Concrete Institute. (2010). Concrete working-manual, manufacturing and construction of high fluidity concrete. Kimoondang.
  5. Yoon, S., & Han, M. (2018). Effect of hollow glass powder on the self-compacting concrete. Journal of the Korea Institue of Building Construction, 18(2), 141-149.
  6. Han, C. (2018). Remicon quality management 5. Kimoondang.
  7. Yoon, S., & Han, M. (2018). Effect analysis of mix designing factors on workability and rheological parameters of self-compacting concrete. Journal of the Korea Institue of Building Construction, 18(2), 235-242.