DOI QR코드

DOI QR Code

Numerical and experimental study on flexural behavior of reinforced concrete beams: Digital image correlation approach

  • Krishna, B. Murali (Department of Civil Engineering, National Institute of Technology Warangal) ;
  • Reddy, V. Guru Prathap (Department of Civil Engineering, National Institute of Technology Warangal) ;
  • Tadepalli, T. (Department of Civil Engineering, National Institute of Technology Warangal) ;
  • Kumar, P. Rathish (Department of Civil Engineering, National Institute of Technology Warangal) ;
  • Lahir, Yerra (Department of Civil Engineering, National Institute of Technology Warangal)
  • Received : 2019.07.23
  • Accepted : 2019.12.03
  • Published : 2019.12.25

Abstract

Understanding the realistic behavior of concrete up to failure under different loading conditions within the framework of damage mechanics and plasticity would lead to an enhanced design of concrete structures. In the present investigation, QR (Quick Response) code based random speckle pattern is used as a non-contact sensor, which is an innovative approach in the field of digital image correlation (DIC). A four-point bending test was performed on RC beams of size 1800 mm × 150 mm × 200 mm. Image processing was done using an open source Ncorr algorithm for the results obtained using random speckle pattern and QR code based random speckle pattern. Load-deflection curves of RC beams were plotted for the results obtained using both contact and non-contact (DIC) sensors, and further, Moment (M)-Curvature (κ) relationship of RC beams was developed. The loading curves obtained were used as input data for material model parameters in finite element analysis. In finite element method (FEM) based software, concrete damage plasticity (CDP) constitutive model is used to predict the realistic nonlinear quasi-static flexural behavior of RC beams for monotonic loading condition. The results obtained using QR code based DIC are observed to be on par with conventional results and FEM results.

Keywords

Acknowledgement

Supported by : MHRD-IMPRINT

References

  1. ABAQUS (2011), Theory Manual, Dassault Systemes Simulia Corp., Providence, RI.
  2. Aggelis, D.G., Verbruggen, S., Tsangouri, E., Tysmans, T. and Van Hemelrijck, D. (2016), "Monitoring the failure mechanisms of a reinforced concrete beam strengthened by textile reinforced cement using acoustic emission and digital image correlation", Smart Struct. Syst., 17(1), 91-105. https://doi.org/10.12989/sss.2016.17.1.091.
  3. Antos, J., Nezerka, V. and Somr, M. (2017), "Assessment of 2d-dic stochastic patterns", Acta Polytechnica CTU Proc., 13(1-10). https://doi.org/10.14311/APP.2017.13.0001.
  4. Blaber, J., Adair, B. and Antoniou, A. (2015), "Ncorr: open-source 2D digital image correlation matlab software", Exper. Mech., 55(6), 1105-1122. https://doi.org/10.1007/s11340-015-0009-1.
  5. Carter, J.L., Uchic, M.D. and Mills, M.J. (2015), "Impact of speckle pattern parameters on DIC strain resolution calculated from in-situ SEM experiments", Fract. Fatig. Fail. Damage Evol., 5, 119-126. https://doi.org/10.1007/978-3-319-06977-7_16.
  6. Dutton, M., Take, W.A. and Hoult, N.A. (2013), "Curvature monitoring of beams using digital image correlation", J. Bridge Eng., 19(3), 05013001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000538.
  7. Fayyad, T.M. and Lees, J.M. (2014), "Application of digital image correlation to reinforced concrete fracture", Procedia Mater. Sci., 3, 1585-1590. https://doi.org/10.1016/j.mspro.2014.06.256.
  8. Felekoglu, B. and Keskinates, M. (2016), "Multiple cracking analysis of HTPP-ECC by digital image correlation method", Comput. Concrete, 17(6), 831-848. https://doi.org/10.12989/cac.2016.17.6.831.
  9. Gencturk, B., Hossain, K., Kapadia, A., Labib, E. and Mo, Y.L. (2014), "Use of digital image correlation technique in full-scale testing of prestressed concrete structures", Measure., 47, 505-515. https://doi.org/10.1016/j.measurement.2013.09.018.
  10. Grassl, P., Xenos, D., Nystrom, U., Rempling, R. and Gylltoft, K. (2013), "A damage-plasticity approach to modelling the failure of concrete", Int. J. Solid. Struct., 50(24), 3805-3816. https://doi.org/10.1016/j.ijsolstr.2013.07.008.
  11. Jankowiak, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Found. Civil Environ. Eng., 6(1), 53-69.
  12. Kalyana Rama, J.S., Chauhan, D.R., Sivakumar, M.V.N., Vasan, A. and Murthy, A.R. (2017), "Fracture properties of concrete using damaged plasticity model-A parametric study", Struct. Eng. Mech., 64(1), 59-69. https://doi.org/10.12989/sem.2017.64.1.059.
  13. Kozicki, J. and Tejchman, J. (2007), "Experimental investigations of strain localization in concrete using Digital Image Correlation (DIC) technique", Arch. Hydro-Eng. Environ. Mech., 54(1), 3-24.
  14. Kumar, A., Vishnuvardhan, S., Murthy, A.R. and Raghava, G. (2019), "Tensile and fracture characterization using a simplified digital image correlation test set-up", Struct. Eng. Mech., 69(4), 467-477. https://doi.org/10.12989/sem.2019.69.4.467.
  15. Lecompte, D., Sol, H., Vantomme, J. and Habraken, A. (2006), "Analysis of speckle patterns for deformation measurements by digital image correlation", SPECKLE06: Speckles, From Grains to Flowers, Int. Soc. Opt. Photon., 6341, 63410E.
  16. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
  17. Long, X., Fu, S., Qi, Z., Yang, X. and Yu, Q. (2013), "Digital image correlation using stochastic parallel-gradient-descent algorithm", Exp. Mech., 53(4), 571-578. https://doi.org/10.1007/s11340-012-9667-4.
  18. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Int. J. Solid. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4.
  19. Meadati, P. and Irizarry, J. (2015), "BIM and QR code for operation and maintenance", Comput. Civil Eng., 556-563. https://doi.org/10.1061/9780784479247.069.
  20. Mudassar, A.A. and Butt, S. (2016), "Improved digital image correlation method", Opt. Laser. Eng., 87, 156-167. https://doi.org/10.1016/j.optlaseng.2015.10.002.
  21. Pagani, A., Zappino, E., de Miguel, A. G., Martilla, V. and Carrera, E. (2019), "Full field strain measurements of composite wing by digital image correlation", Adv. Aircraft Spacec. Sci., 6(1), 69-86. https://doi.org/10.12989/aas.2019.6.1.069.
  22. Pan, B., Qian, K., Xie, H. and Asundi, A. (2009), "Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review", Measur. Sci. Technol., 20(6), 062001. https://doi.org/10.1088/0957-0233/20/6/062001
  23. Prasad, M.L.V. and Kumar Rathish, P. (2012), "Moment-curvature relationship of glass fiber reinforced self-compacting recycled aggregate concrete", J. Environ. Res. Develop., 7(2A).
  24. Salmanpour, A.H. and N. Mojsilovic. (2013), "Application of digital image correlation for strain measurements of large masonry walls", Conference Proceedings APCOM & ISCM, Singapore.
  25. Suryanto, B., Tambusay, A. and Suprobo, P. (2017), "Crack mapping on shear-critical reinforced concrete beams using an open source digital image correlation software", Civil Eng. Dimens., 19(2), 93-98. https://doi.org/10.9744/ced.19.2.93-98.
  26. Sutton, M.A., Orteu, J.J. and Schreier, H. (2009), Image Correlation for Shape, Motion and Deformation Measurements: basic Concepts, Theory and Applications, Springer Science & Business Media.
  27. Swamy Naga Ratna Giri, P., Rajesh Kumar, G., Sri Rama Chand, M. and Rathish Kumar, P. (2018), "Flexural behaviour of tie-confined self-curing self-compacting concrete", Mag. Concrete Res., 70(23), 1232-1242. https://doi.org/10.1680/jmacr.17.00338.
  28. Yuan, Y., Huang, J., Fang, J., Yuan, F. and Xiong, C. (2015), "A self-adaptive sampling digital image correlation algorithm for accurate displacement measurement", Opt. Laser. Eng., 65, 57-63. https://doi.org/10.1016/j.optlaseng.2014.05.006.