DOI QR코드

DOI QR Code

Evaluating the effects of the inclinations of rock blocks on the stability of bimrock slopes

  • 투고 : 2018.02.20
  • 심사 : 2019.02.12
  • 발행 : 2019.02.28

초록

The process of slope stability analysis is one of the most important stages in design of some civil and mining projects. Bimslopes are made from bimrocks (block-in-matrix rocks) where rocky blocks are distributed in a bonded matrix of finer texture. These kind of slopes are often seen in weathered and near-surface depths. Previous studies have shown that VBP (Volumetric Block Proportion) is one of the most significant factors affecting bimrocks strength and consequently the stability of bimslopes. In this paper, the influence of block inclinations on bimslope stability have been investigated. For this purpose, 180 theoretical models have been made with various VBPs, all of them have a specified block size distribution. These bimslopes contain blocks with differing dips relative the slope inclination. Also for each kind of block inclination, 10 different blocks arrangements have been modeled. The Finite Element Method (FEM) was used to analysis the stability of these bimslopes models. The results showed the inclination of blocks has a strong impact on the Safety Factor and stability of bimslopes. When the difference in angle of dip of blocks relative to the slope angle is maximum, the Safety Factor of bimslopes tends to be a maximum compared with the matrix-only state. Furthermore, with increasing VBP of bimslopes stability increases. The graphs obtained from this study could be used for preliminary guidance in the projects design with bimslopes.

키워드

참고문헌

  1. Afifipour, M. and Moarefvand, P. (2014), "Mechanical behavior of bimrocks having high rock block proportion", Int. J. Rock Mech. Min. Sci., 65, 40-48. https://doi.org/10.1016/j.ijrmms.2013.11.008
  2. Bieniawski, Z.T. (1989), Engineering Rock Mass Classifcations, John Wiley and Sons, New York, U.S.A.
  3. Cen, D., Huang, D. and Ren, F. (2017), "Shear deformation and strength of the interphase between the soil-rock mixture and the benched bedrock slope surface", Acta Geotechnica, 12(2), 391-413. https://doi.org/10.1007/s11440-016-0468-2
  4. Chen, S., Yue, Z.Q. and Tham, L.G. (2004), "Digital image-based numerical modeling method for prediction of inhomogeneous rock failure", Int. J. Rock Mech. Min. Sci., 41(6), 939-957. https://doi.org/10.1016/j.ijrmms.2004.03.002
  5. Coli, N., Berry P., Boldni D. and Bruno R. (2012), "The contribution of geostatistics to the characterization of some bimrock properties", Eng. Geol., 137, 53-63. https://doi.org/10.1016/j.enggeo.2012.03.015
  6. Grigull, S., Krohe, A., Moos, C., Wassmann, S. and Stockhert, B. (2012), ""Order from chaos": A field-based estimate on bulk rheology of tectonic melanges formed in subduction zones", Tectonophysics, 568, 86-101. https://doi.org/10.1016/j.tecto.2011.11.004
  7. Hoek, E. and Brown, ET. (1980), Underground Excavations in Rock, Institute of Mining and Metallurgy, London, U.K.
  8. Hoek, E., Marinos, P. and Benissi, M. (2002), "Applicability of the geological strength index (GSI) classification for very weak and sheared rock masses: the case of Athens schist formation", Bull. Eng. Geol. Environ., 57(2), 151-160. https://doi.org/10.1007/s100640050031
  9. Jin, L., Zeng, Y., Xia, L. and Ye, Y. (2017), "Experimental and numerical investigation of mechanical behaviors of cemented soil-rock mixture", Geotech. Geolog. Eng., 35(1), 337-354. https://doi.org/10.1007/s10706-016-0109-4
  10. Kahraman, S. and Alber, M. (2006), "Estimating unconfined compressive strength and elastic modulus of a fault breccia mixture of weak blocks and strong matrix", Int. J. Rock Mech. Min. Sci., 43(8), 1277-1287. https://doi.org/10.1016/j.ijrmms.2006.03.017
  11. Kalender, A., Sonmez, H., Medley, E., Tunusluoglu, C. and Kasapoglu, K.E. (2014), "An approach to predicting the overall strengths of unwelded bimrocks and bimsoils", Eng. Geol., 183, 65-79. https://doi.org/10.1016/j.enggeo.2014.10.007
  12. Li, Y., Zhou, H., Dong, Z., Zhu, W., Li, S. and Wang, S. (2018), "Numerical investigations on stability evaluation of a jointed rock slope during excavation using an optimized DDARF method", Geomech. Eng., 14(3), 271-281. https://doi.org/10.12989/GAE.2018.14.3.271
  13. Lindquist, E.S. (1994), "The strength and deformation properties of melange", Ph.D. Dissertation, University of California, Berkeley., California, U.S.A.
  14. Lindquist, E.S. and Goodman, RE. (1994), "Strength deformation properties of a physical melange", Proceedings of the 1st North American Rock Mechanics Symposium, Austin, Texas, U.S.A., June.
  15. Medley, E. (1994), "The engineering characterization of melanges and similar block-in-matrix rocks (BIMRock's)", Ph.D. Dissertation, University of California, Berkeley., California, U.S.A.
  16. Medley, E.W. (1997), "Uncertainty in estimates of block volumetric proportion in melange bimrocks", Proceedings of the International Symposium of International Association of Engineering Geologists, Athens, Greece, June.
  17. Medley, E.W. (2001), "Orderly characterization of chaotic Franciscan melanges", J. Eng. Geol. Geomech. Tunn., 19(4), 20-33.
  18. Medley, E.W. and Sanz. P.R. (2004), "Characterization of bimrocks (rock/soil mixtures) with application to slope stability problems", Proceedings of the Eurock 2004 and the 53rd Geomechanics Colloquium, Salzburg, Austria, October
  19. Meng, Q.X., Wang, H.L., Xu, W.Y. and Cai, M. (2018), "A numerical homogenization study of the elastic property of a soil-rock mixture using random mesostructure generation", Comput. Geotech., 98, 48-57. https://doi.org/10.1016/j.compgeo.2018.01.015
  20. Napoli, M. L., Barbero, M., Ravera, E. and Scavia, C. (2018), "A stochastic approach to slope stability analysis in bimrocks", Int. J. Rock Mech. Min. Sci., 101, 41-49. https://doi.org/10.1016/j.ijrmms.2017.11.009
  21. Riedmuller, G., Brosch, F.J., Klima, K. and Medley, E.W. (2001), "Engineering geological characterization of brittle faults and classification of fault rocks", J. Eng. Geol. Geomech. Tunn., 19(4), 13-19.
  22. Sonmez, H. and Ulusay, R. (1999), "Modifications to the geological strength index (GSI) and their applicability to stability of slopes", Int. J. Rock Mech. Min. Sci., 36(6), 743-760. https://doi.org/10.1016/S0148-9062(99)00043-1
  23. Sonmez, H., Ercanoglu, M., Kalender, A., Dagdelenler, G. and Tunusluoglu, C. (2016), "Predicting uniaxial compressive strength and deformation modulus of volcanic bimrock considering engineering dimension", Int. J. Rock Mech. Min. Sci., 86, 91-103. https://doi.org/10.1016/j.ijrmms.2016.03.022
  24. Sonmez, H., Gokceoglu, C., Medley, E., Tuncay, E. and Nefeslioglu, H.A. (2006), "Estimating the uniaxial compressive strength of a volcanic bimrock", Int. J. Rock Mech. Min. Sci., 43(4), 554-561. https://doi.org/10.1016/j.ijrmms.2005.09.014
  25. Sonmez, H., Gokceoglu, C., Tuncany, E., Medley, E. and Nefeslioglu, H.A. (2004), "Relationships between volumetric block proportions and overall UCS of a volcanic bimrock", Felsbau Rock Soil. Eng. J. Eng. Geol. Geomech. Tunn., 22(5), 27-32.
  26. Tsesarsky, M., Hazan, M. and Gal, E. (2016), "Estimating the elastic moduli and isotropy of block in matrix (bim) rocks by computational homogenization", Eng. Geol., 200, 58-65. https://doi.org/10.1016/j.enggeo.2015.12.003
  27. Xia, J., Gao, W., Hu, R. and Sui, H. (2017), "Influence of strength difference between block and matrix on the mechanical property of block-in-matrix soils: An experimental study", Elec. J. Geotech. Eng., 22, 2411-2426.
  28. Xu, W.J., Hu, L.M. and Gao, W. (2016a), "Random generation of the meso-structure of a soil-rock mixture and its application in the study of the mechanical behavior in a landslide dam", Int. J. Rock Mech. Min. Sci., 86, 166-178. https://doi.org/10.1016/j.ijrmms.2016.04.007
  29. Xu, W.J., Wang, S., Zhang, H.Y. and Zhang, Z.L. (2016b), "Discrete element modelling of a soil-rock mixture used in an embankment dam", Int. J. Rock Mech. Min. Sci., 86, 141-156. https://doi.org/10.1016/j.ijrmms.2016.04.004
  30. Xu, W.J., Xu, Q. and Hu, R.L. (2011), "Study on the shear strength of soil-rock mixture by large scale direct shear test", Int. J. Rock Mech. Min. Sci., 48(8), 1235-1247. https://doi.org/10.1016/j.ijrmms.2011.09.018
  31. Yu, Y., Sun, H. and Juang, C.H. (2018), "A new model for response of laterally loaded piles in soil-rock mixtures", Comput. Geotech., 104, 237-246. https://doi.org/10.1016/j.compgeo.2018.08.021
  32. Yue, ZQ., Chen, S. and Tham, L.G. (2003), "Finite element modeling of geomaterials using digital image processing", Comput. Geotech., 30(5), 375-397. https://doi.org/10.1016/S0266-352X(03)00015-6
  33. Zhang, S., Tang, H., Zhan, H., Lei, G. and Cheng, H. (2016), "Investigation of scale effect of numerical unconfined compression strengths of virtual colluvial-deluvial soil-rock mixture", Int. J. Rock Mech. Min. Sci., 77, 208-219. https://doi.org/10.1016/j.ijrmms.2015.04.012

피인용 문헌

  1. Soil-Rock Slope Stability Analysis under Top Loading considering the Nonuniformity of Rocks vol.2020, 2019, https://doi.org/10.1155/2020/9575307
  2. Numerical Investigation of the Influence of Rock Characteristics on the Soil-Rock Mixture (SRM) Slopes Stability vol.24, pp.11, 2019, https://doi.org/10.1007/s12205-020-0034-1
  3. Application of the tortuous surface method to stochastic analysis of bimslope stability vol.79, pp.10, 2019, https://doi.org/10.1007/s10064-020-01909-5