ADRIGE 트리즈 알고리즘과 실험계획법을 이용한 인공지지체 3D프린팅의 제작문제 해결에 관한 연구

A Study on Problem Solving of 3D Printing Production of Scaffold Using ADRIGE TRIZ Algorithm and DOE

  • 이송연 (한국기술교육대학교대학원 메카트로닉스공학과) ;
  • 허용정 (한국기술교육대학교 메카트로닉스공학부)
  • Lee, Song-Yeon (Mechatronics Engineering, Graduate School of Korea University of Technology and Education) ;
  • Huh, Yong Jeong (Department of Mechatronics Engineering, Korea University of Technology and Education)
  • 투고 : 2019.06.20
  • 심사 : 2019.06.25
  • 발행 : 2019.06.30

초록

In this paper, we investigated the problems and solutions in the production of scaffolds using commercially available FDM 3D printers. We used ADRIGE TRIZ algorithm to systematically analyze the problems and suggest solutions. We printed scaffolds using suggested solutions. We measured the pore size and printing time of the scaffolds. We have confirmed that the printing precision is greater than 99% and the printing time is decreased by half. The suggested solutions proved its validity through experiments and showed satisfactory results.

키워드

참고문헌

  1. Min-Woo Sa, Hae-Ri Shim and Jong-Yeong Kim, "Experimental Research of ZrO2/BCP/PCL Scaffold with Complex Pore Pattern for Bone Tissue", J. of Korean Society of Mechanical Engineering, Vol. 39, pp. 1153-1159, 2015. https://doi.org/10.3795/KSME-A.2015.39.11.1153
  2. Sa-Hwan Lim and Yong-Jeong Huh, "Solving for Missing Link of Exhaust Tube at the Household Gas Boiler Using TRIZ", J. of Transactions of the Society of CAD/CAM Engineering, Vol. 12, pp. 461-465, 2007.
  3. Sa-Hwan Lim, Seong-Do Hong and Yong-Jeong Huh, "A Study on the Creative Design of Solar Flower using TRIZ(6SC)", J. of The Korean Society of Semiconductor & Display Technology, Vol.10, pp. 19-23, 2011.
  4. Seong-Do Hong and Yong-Jeong Huh, "A Study on TRIZ Applied Design for Photovoltaic System with Reversal Tracking Reflector", J. of The Korean Society of Semiconductor & Display Technology, Vol.11, pp. 27-31, 2012.
  5. Hai-Sung Jeong, "The Solution of Reliability Problem for the Actuator Latch Device of Hard Disk Drive Using TRIZ", J. of the applied reliability, Vol. 14, pp.147-151, 2014.
  6. Song-Yeon Lee and Yong-Jeong Huh, "A Study on Manufacturing Condition of PLGA Scaffold Using 3SC Practical TRIZ and Design of Experiment", J. of The Korean Society of Semiconductor & Display Technology, Vol.17, pp. 70-75, 2018.