Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Impact Fracture Behavior under Temperature Variation and Compressive·Flexural Strength of Cement Composites using VAE Powder Polymer and PVA Fiber

PVA 섬유와 VAE 분말 폴리머를 사용한 시멘트복합체의 압축·휨강도 및 온도변화에 따른 충격파괴거동

  • 허광희 (건양대학교 해외건설플랜트학과) ;
  • 박종건 (건양대학교 공공안전연구소) ;
  • 김충길 (건양대학교 해외건설플랜트학과) ;
  • 이형준 (한밭대학교 건설환경공학과) ;
  • 최원석 (한밭대학교 건설환경공학과)
  • Received : 2018.09.13
  • Accepted : 2018.12.10
  • Published : 2019.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper studies impact fracture behavior under temperature variation and compressive flexural strength of cement composites using VAE(vinyl acetate ethylene) powder polymer and PVA(polyvinyl alcohol) fiber. Impact test were conducted in the temperature range selected for the $-35^{\circ}C$, $0^{\circ}C$ and $35^{\circ}C$. In this experimental study, impact test were carried out using a drop impact testing machine (Ceast 9350) to obtain such as displacement, time, and impact fracture energy of normal specimen and and cement composites specimen. As test results, the use of VAE powder polymer and PVA fiber were observed to enhance the flexural strength of mortar. The compressive strength of PVA fibers reinforced cement composites was slightly decreased at 28 days, but the flexural strength was observed to increase 24.4% of normal mortar strength. As a result of the drop impact tests, PVA fiber reinforced cement composites specimens showed microcracks due to energy dispersion and crack prevention with bridge effect of the fibers, and scabbing or perforation by impact was suppressed. On the other hand, the normal mortar and VAE powder polymer cement composites specimens were carried out to the perforation and macro crack. Most of normal mortar and the cement composites subjected to impact load on specimens shows mostly local brittle failure. The impact resistant performance of the specimen with PVA fiber was greatly improved due to the increase of flexure performance.

본 연구는 PVA(polyvinyl alcohol) 섬유와 VAE(vinyl acetate ethylene) 분말 폴리머를 사용한 시멘트복합체의 압축 휨강도 와 온도변화에 따른 충격파괴거동을 연구하였다. 충격시험은 $-35^{\circ}C$, $0^{\circ}C$ 및 $35^{\circ}C$의 선정된 온도조건에서 실시하였다. 본 실험에서는 시멘트 복합체와 일반 모르타르에 대한 충격파괴 에너지와 변위, 시간을 얻기 위해 낙하 충격시험기(Ceast 9350)를 사용하여 충격시험을 수행하였다. 강도시험결과, PVA 섬유와 VAE 분말 폴리머의 휨강도는 모두 증가하였다. PVA 섬유보강 시멘트복합체의 경우 재령 28일에서의 압축강도는 약간 감소하였으나, 휨강도는 일반 모르타르 강도보다 24.4% 증가하였다. 낙하 충격시험 결과, PVA 섬유보강 시멘트복합체 시편은 섬유의 가교역할로 인한 균열발생의 억제와 에너지 분산에 의한 미세균열이 발생하였으며, 충격에 의한 배면파괴와 관통에 대하여 억제되었다. 반면 VAE 분말 폴리머 시멘트복합체와 일반 모르타르의 시편은 대부분 큰 균열이나 관통파괴 되었다. 충격하중을 받는 시멘트복합체와 일반 모르타르의 시편은 대부분 국부적인 취성파괴거동을 보이며, PVA 섬유보강에 의한 휨성능 증진으로 인해 충격에 대한 저항성능이 크게 향상되었다.

Keywords

References

  1. Bindiganavile, V., and Banthia, N (2001), Polymer and Steel fiber-Reinforced Cementitious Composites under Impact Loading-part 2: Flexural Toughness, ACI Materials Journal, 98(1), 17-24.
  2. Cho, Y.I., Han, S.H., Park, J.K., Yeon, Y.M., and Hong, K.N (2017), Flexural Behavior of RC Beam Repaired with Polymer Mortar, Journal of the Korea Institute for Structural of Maintenance and Inspection, 21(1), 91-99. https://doi.org/10.11112/jksmi.2017.21.1.091
  3. Choi, j.G., Lee, G.C., Ko, K.T., and Rue, G.S (2015), Effect of VAE Type Powder Polymer on Strength Properties of High Strength Polymer Cement Mortars, The Korea Institute of Building Construction, 15(3), 299-306. https://doi.org/10.5345/JKIBC.2015.15.3.299
  4. Han, S.H., Kim, G.Y., Kim, H.S., Kim J.Y., and Nam, J.S (2015), Evaluation on Rear Fracture Reduction and Crack Properties of Cement Composites with High-Velocity Projectile Impact by Fiber Types, Journal of the Korea Concrete Institute, 27(2), 157-167. https://doi.org/10.4334/JKCI.2015.27.2.157
  5. Kim, S.H., Hong, S.G., Yun, H.D., and Kang, H.K. (2015), High-Velocity Impact Experiment on Impact Resistance of Steel Fiber-Reinforced Concrete Panels with Wire Mesh, Journal of the Korea Concrete Institute, 27(2), 103-113. https://doi.org/10.4334/JKCI.2015.27.2.103
  6. Kim, S.H., Kang, M.B., and Lee, D.W. (2015), Chloride penetration Resistance and Flexural Behavior of Hybrid organic fibers reinforced Concrete, J. Korean Geosynthetics Society, 14(4), 105-115. https://doi.org/10.12814/jkgss.2015.14.4.105
  7. Kim, Y.W., Min, K.W., Yang, J.M., and Yoon, W.S. (2009), Flexural and Impact Resisting Performance of HPFRCCs using Hybrid PVA Fibers, Journal of the Korea Concrete Institute, 21(6), 705-712. https://doi.org/10.4334/JKCI.2009.21.6.705
  8. Lee, B.Y., Bang, J.W., and Kim, Y.Y (2013), Enhancing the performance of Polypropylene Fiber Reinforced Cementitious Composite Produced with High Volume Fly Ash, Journal of the Korea Institute for Structural of Maintenance and Inspection, 17(3), 118-125. https://doi.org/10.11112/jksmi.2013.17.3.118
  9. Lee, S.Y., Kim, G.D., Kim, S.J and Chang, C.H (2018), High-Energy Impact Behaviors of Hybrid Composite Plates Strengthened with 3D-UHMWPE Composites, Shock and Vibration, 2018(2018), 1-11.
  10. Li, L., Lee, Lee, J.Y., Min, K.H., and Yoon, Y.S (2013), Evaluation Local Damages and Blast Resistance of RC Slabs Subjected to Contact Detonation, Journal of the Korea Institute for Structural of Maintenance and Inspection, 17(1), 37-45. https://doi.org/10.11112/jksmi.2013.17.1.037
  11. Min, J.Y., Cho, H.W., Lee, J.W., Kim, S.W., and Moon, J.H (2015), Evaluation of Fracture Behaviours of Cementitious Composites by High-Velocity Projectile Impact, Journal of the Korea Institute for Structural of Maintenance and Inspection, 19(6), 55-62. https://doi.org/10.11112/jksmi.2015.19.6.055
  12. Min, K.H., Lee, J.Y., Kim, M.H., and Yoon, Y.S (2011), Behavior of Concrete Segmented Composites using Polymer Mortar under Static and Impact loadings, Journal of the Korea Institute for Structural of Maintenance and Inspection, 15(5), 169-177. https://doi.org/10.11112/JKSMI.2011.15.5.169
  13. Mindess, S., Bentur, A., Yan C., and Vondran, G (1989), Impact resistance of Concrete Containing both Conventional Steel Reinforcement and Fibrillated Polypropylene Fibers, ACI Materials Journal, 86(6), 545-549.
  14. Park, S.S., and Kim, J.H (2010), Study on Adhesive Strength of Polymer Modified Cement Mortar for Maintenance in Concrete Structures, Journal of the Korea Institute for Structural of Maintenance and Inspection, 14(5), 128-135. https://doi.org/10.11112/jksmi.2010.14.5.128
  15. Poston, R.W., Kesner K.E., Vaysburd, A.M., and Emmons, P.H (2001), Concrete Repair Material Performance - Laboratory Study, ACI Materials Journal, 98(2), 137-147.
  16. Shao, Y., and Shah, S.P (1997), Mechanical Properties of PVA Fiber reinforced Cement Composites Fabricated by Extrusion Processing, ACI Materials Journal, 94(3), 555-564.
  17. Son, M.J., Kim, G.Y., Lee, S.K., Kim, H.S., and Nam, Y.S (2017), Tensile Behavior of Hybrid Fiber Reinforced Cement Composite According to the Hooked Steel Fiber and Polyvinyl Alcohol Fiber Blending Ratio and strain and Strain Rate, Journal of the Korea Institute for Structural of Maintenance and Inspection, 21(6), 98-105. https://doi.org/10.11112/jksmi.2017.21.6.098