DOI QR코드

DOI QR Code

Modeling time-dependent behavior of hard sandstone using the DEM method

  • Guo, Wen-Bin (Inner Mongolia Key Laboratory of Mining Pressure and Strata Control, Hulunbeir University) ;
  • Hu, Bo (Inner Mongolia Key Laboratory of Mining Pressure and Strata Control, Hulunbeir University) ;
  • Cheng, Jian-Long (State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology) ;
  • Wang, Bei-Fang (State Key Laboratory of Water Resource Protection and Utilization in Coal Mining)
  • 투고 : 2019.10.14
  • 심사 : 2020.02.17
  • 발행 : 2020.03.25

초록

The long-term stability of rock engineering is significantly affected by the time-dependent deformation behavior of rock, which is an important mechanical property of rock for engineering design. Although the hard rocks show small creep deformation, it cannot be ignored under high-stress condition during deep excavation. The inner mechanism of creep is complicated, therefore, it is necessary to investigate the relationship between microscopic creep mechanism and the macro creep behavior of rock. Microscopic numerical modeling of sandstone creep was performed in the investigation. A numerical sandstone sample was generated and Parallel Bond contact and Burger's contact model were assigned to the contacts between particles in DEM simulation. Sensitivity analysis of the microscopic creep parameters was conducted to explore how microscopic parameters affect the macroscopic creep deformation. The results show that the microscopic creep parameters have linear correlations with the corresponding macroscopic creep parameters, whereas the friction coefficient shows power function with peak strength and Young's modulus, respectively. Moreover, the microscopic parameters were calibrated. The creep modeling curve is in good agreement with the verification test result. Finally, the creep curves under one-step loading and multi-step loading were compared. This investigation can act as a helpful reference for modeling rock creep behavior from a microscopic mechanism perspective.

키워드

과제정보

연구 과제 주관 기관 : Inner Mongolia Universities

This work is finically supported by the Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining (Grant No. SHJT-17-42.7), and Key Scientific Research Project of Inner Mongolia Universities (NJZZ20300).

참고문헌

  1. Amitrano, D. and Helmstetter, A. (2006), "Brittle creep, damage, and time to failure in rocks", J. Geophys. Res., 111(B11), B11201. https://doi.org/10.1029/2005JB004252.
  2. Ashby, M.F. and Sammis, C.G. (1990), "The damage mechanics of brittle solids in compression", Pure Appl. Geophys., 133(3), 489-521. https://doi.org/10.1007/BF00878002.
  3. Atkinson, B.K. (1984), "Subcritical crack growth in geological materials", J. Geophys. Res., 89(B6), 4077-4114. https://doi.org/10.1029/JB089iB06p04077.
  4. Bahrani, N., Kaiser, P.K. and Valley, B. (2014), "Distinct element method simulation of an analogue for a highly interlocked, nonpersistently jointed rock mass", Int. J. Rock Mech. Min. Sci., 71,117-130. https://doi.org/10.1016/j.ijrmms.2014.07.005
  5. Bhat, H.S., Sammis, C.G. and Rosakis, A.J. (2011), "The micromechanics of Westerly granite at large compressive loads", Pure Appl. Geophys., 168(12), 2181-2198. https://doi.org/10.1007/s00024-011-0271-9
  6. Bikong, C., Hoxha, D. and Shao, J.F. (2015), "A micro-macro model for time-dependent behavior of clayey rocks due to anisotropic propagation of microcracks", Int. J. Plasticity, 69, 73-88. https://doi.org/10.1016/j.ijplas.2015.02.001.
  7. Brantut, N., Heap, M.J., Meredith, P.G. and Baud, P. (2013), "Time-dependent cracking and brittle creep in crustal rocks: A review", J. Struct. Geol., 52, 17-43. https://doi.org/10.1016/j.jsg.2013.03.007.
  8. Cai, M., Kaiser, P.K., Tasaka, Y., Maejima, T., Morioka, H. and Minami, M. (2004), "Generalized crack initiation and crack damage stress thresholds of brittle rock masses near underground excavations", Int. J. Rock Mech. Min. Sci., 41(5), 833-847. https://doi.org/10.1016/j.ijrmms.2004. 02.001.
  9. Chen, W. and Konietzky, H. (2014), "Simulation of heterogeneity, creep, damage and lifetime for loaded brittle rocks", Tectonophysics, 633, 164-175. https://doi.org/10.1016/j.tecto.2014.06.033.
  10. Cho, N., Martin, C.D. and Sego, D.C. (2007), "A clumped particle model for rock", Int. J. Rock Mech. Min. Sci., 44(7), 997-1010. https://doi.org/10.1016/j.ijrmms.2007.02.002.
  11. Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granular assemblies", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1980.30.3.331.
  12. Damjanac, B. and Fairhurst, C. (2010), "Evidence for a long-term strength threshold in crystalline rock", Rock Mech. Rock Eng., 43(5), 513-531. https://doi.org/10.1007/s00603-010-0090-9
  13. Gutierrez-Ch, J.G., Senent, S. and Jimenez, R. (2019), "Distinct Element Method Simulation of Creep Behaviour", Proceedings of the 53rd US Rock Mechanics/Geomechanics Symposium, New York, U.S.A. June.
  14. Itasca Consulting Group Inc. (2004), Particle Flow Code, Itasca Consulting Group Inc., Sudbury, Canada.
  15. Koyama, T. and Jing, L. (2007), "Effects of model scale and particle size on micro-mechanical properties and failure processes of rocks-a particle mechanics approach", Eng. Anal. Bound. Elem., 31(5), 458-472. https://doi.org/10.1016/j.enganabound.2006.11.009.
  16. Lajtai, E.Z. and Bielus, LP. (1986), "Stress corrosion cracking of lac du bonnet granite in tension and compression", Rock Mech. Rock Eng., 19(2), 71-87. https://doi.org/10.1007/BF01042525.
  17. Li, H., Yang, C.H., Ma, H.L., Shi, X.L., Zhang, H.N. and Dong, Z.K. (2020), "A 3D grain-based creep model (3D-GBCM) for simulating long-term mechanical characteristic of rock salt", J. Petrol. Sci. Eng., 185, 106672. https://doi.org/10.1016/j.petrol.2019.106672.
  18. Li, W., Han, Y., Wang, T. and Ma, J. (2017), "DEM micromechanical modeling and laboratory experiment on creep behavior of salt rock", J. Nat. Gas Sci. Eng., 46, 38-46. https://doi.org/10.1016/j.jngse.2017.07.013
  19. Li, X. and Konietzky, H. (2014), "Time to failure prediction scheme for rocks", Rock Mech. Rock Eng., 47(4), 1493-1503. https://doi.org/10.1007/s00603-013-0447-y.
  20. Liu, G. and Cai, M. (2018), "Modeling time-dependent failure of brittle rock using PFC grain-based model", Proceedings of the 52nd US Rock Mechanics/Geomechanics Symposium, Seattle, Washington, U.S.A., June.
  21. Malan, D.F. (2002), "Simulation of the time-dependent behavior of excavations in hard rock", Rock Mech. Rock Eng., 35(4), 225-254. https://doi.org/10.1007/s00603-002-0026-0.
  22. Miura, K., Okui, Y. and Horii, H. (2003), "Micromechanics-based prediction of creep failure of hard rock for long-term safety of high-level radioactive waste disposal system", Mech. Mater., 35(3-6), 587-601. https://doi.org/10.1016/S0167-6636(02)00286-7.
  23. Moghadam, N.S., Mirzabozorg, H. and Noorzad, A. (2013), "Modeling time-dependent behavior of gas caverns in rock salt considering creep, dilatancy and failure", Tunn. Undergr. Sp. Technol., 33, 171-185. https://doi.org/10.1016/j.tust.2012.10.001.
  24. Mohanty, S. and Vandergrift, T. (2012), "Long term stability evaluation of an old underground gas storage cavern using unique numerical methods", Tunn. Undergr. Sp. Technol., 30, 145-154. https://doi.org/10.1016/j.tust.2012.02.015.
  25. Potyondy, D.O. (2007), "Simulating stress corrosion with a bonded-particle model for rock", Int. J. Rock Mech. Min. Sci., 44(5), 677-691. https://doi.org/10.1016/j.ijrmms.2006.10.002.
  26. Scholz, C.H. (1968), "The frequency-magnitude relation of micro fracturing in rock and its relation to earthquakes", Bull. Seismol. Soc. Amer., 58(1), 399-415. https://doi.org/10.1785/BSSA0580010399
  27. Sharifzadeh, M., Tarifard, A. and Moridi, M.A. (2013), "Timedependent behavior of tunnel lining in weak rock mass based on displacement back analysis method", Tunn. Undergr. Sp. Technol., 38, 348-356. https://doi.org/10.1016/j.tust.2013.07.014.
  28. Shin, K., Okubo, S., Fukui, K. and Hashiba, K. (2005), "Variation in strength and creep life of six Japanese rocks", Int. J. Rock Mech. Min. Sci., 42(2), 251-260. https://doi.org/10.1016/j.ijrmms.2004.08.009.
  29. Sone, H and Zoback, M.D. (2014), "Time-dependent deformation of shale gas reservoir rocks and its long-term effect on the in situ state of stress", Int. J. Rock Mech. Min. Sci., 69, 120-132. https://doi.org/10.1016/j.tust.2013.07.014.
  30. Song, Z.Y., Konietzky, H. and Herbst, M. (2019), "Bondedparticle model-based simulation of artificial rock subjected to cyclic loading", Acta Geotechnica, 14(4), 955-971. https://doi.org/10.1007/s11440-018-0723-9.
  31. Wang, M.Z. and Cai, M. (2020), "A grain-based time-to-failure creep model for brittle rocks", Comput. Geotech., 119, 103344. https://doi.org/10.1016/j.compgeo.2019.103344.
  32. Wu, K. and Shao, Z.S. (2019a), "Visco-elastic analysis on the effect of flexible layer on mechanical behavior of tunnels", Int. J. Appl. Mech., 11(3), 1950027. https://doi.org/10.1142/S1758825119500273.
  33. Wu, K. and Shao, Z.S. (2019b), "Study on the effect of flexible layer on support structures of tunnel excavated in viscoelastic rocks", J. Eng. Mech., 145(10), 04019077. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001657.
  34. Wu, K., Shao, Z.S., Qin, S. and Li, B.X. (2020), "Determination of deformation mechanism and countermeasures in silty clay tunnel", J. Perform. Constr. Fac., 34(1), 04019095. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001381.
  35. Xue, Y.T, Mishra, B. and Gao, D. (2017), "Numerical and laboratory analysis of relaxation tests for determining timedependent properties of rock", Geotech. Geol. Eng., 35(2), 615-629. https://doi.org/10.1007/s10706-016-0129-0.

피인용 문헌

  1. Long-term behavior of earth pressure around a high-filled cut-and-cover tunnel vol.26, pp.4, 2020, https://doi.org/10.12989/gae.2021.26.4.311
  2. Burger’s Bonded Model for Distinct Element Simulation of the Multi-Factor Full Creep Process of Soft Rock vol.9, pp.9, 2020, https://doi.org/10.3390/jmse9090945