DOI QR코드

DOI QR Code

A novel approach for predicting lateral displacement caused by pile installation

  • Li, Chao (School of Civil Engineering, Central South University) ;
  • Zou, Jin-feng (School of Civil Engineering, Central South University) ;
  • Li, Lin (Department of Geotechnical Engineering, Tongji University)
  • 투고 : 2019.01.16
  • 심사 : 2020.01.15
  • 발행 : 2020.01.25

초록

A novel approach for predicting lateral displacement caused by pile installation in anisotropic clay is presented, on the basis of the cylindrical and spherical cavities expansion theory. The K0-based modified Cam-clay (K0-MCC) model is adopted for the K0-consolidated clay and the process of pile installation is taken as the cavity expansion problem in undrained condition. The radial displacement of plastic region is obtained by combining the cavity wall boundary and the elastic-plastic (EP) boundary conditions. The predicted equations of lateral displacement during single pile and multi-pile installation are proposed, and the hydraulic fracture problem in the vicinity of the pile tip is investigated. The comparison between the lateral displacement obtained from the presented approach and the measured data from Chai et al. (2005) is carried out and shows a good agreement. It is suggested that the presented approach is a useful tool for the design of soft subsoil improvement resulting from the pile installation.

키워드

과제정보

This work was supported by the National Key R&D Program of China (2017YFB1201204). The first author thanks Project 2018zzts188 supported by Innovation Foundation for Postgraduate of the Central South University. The editor's and anonymous reviewer's comments have improved the quality of the study and are also greatly acknowledged.

참고문헌

  1. Ahn, H.Y., Oh, D.W. and Lee, Y.J. (2018), "Behaviour of vertically and horizontally loaded pile and adjacent ground affected by tunneling", Geomech. Eng., 15(3), 861-868. https://doi.org/10.12989/gae.2018.15.3.861.
  2. Carter, J.P. and Yeung, S.K. (1985), "Analysis of cylindrical cavity expansion in a strain weakening material", Comput. Geotech., 1(3), 161-180. https://doi.org/10.1016/0266-352X(85)90021-7.
  3. Carter, J.P., Booker, J.R. and Yeung, S.K. (1986), "Cavity expansion in cohesive frictional soils", Geotechnique, 36(3), 345-358. https://doi.org/10.1680/geot.1986.36.3.349.
  4. Carter, J.P., Randolph, M.F. and Wroth, C.P. (1979), "Stress and pore pressure changes in clay during and after the expansion of a cylindrical cavity", Int. J. Numer. Anal. Meth. Geomech., 3(4), 305-322. https://doi.org/10.1002/nag.1610030402.
  5. Chai, J. C., Miura, N. and Koga, H. (2005), "Lateral displacement of ground caused by soil-cement column installation", J. Geotech. Geoenviron. Eng., 131(5), 623-632. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:5(623).
  6. Chai, J.C. and Carter, J.P. (2011), Deformation Analysis in Soft Ground Improvement, Springer Netherlands.
  7. Chen, G.H., Zou, J.F. and Chen, J.Q. (2019a), "Shallow tunnel face stability considering pore water pressure in non-homogeneous and anisotropic soils", Comput. Geotech., 116, 103205. https://doi.org/10.1016/j.compgeo.2019.103205.
  8. Chen, G.H., Zou, J.F., and Qian, Z.H. (2019b), "An improved collapse analysis mechanism for the face stability of shield tunnel in layered soils", Geomech. Eng., 17(1), 97-107. https://doi.org/10.12989/gae.2019.17.1.097.
  9. Chen, S.L. and Abousleiman, Y.N. (2012), "Exact undrained elasto-plastic solution for cylindrical cavity expansion in modified cam clay soil mass", Geotechnique, 62(5), 447-456. http://dx.doi.org/10.1680/geot.11.P.027.
  10. Fattah, M. Y., Salim, N. M. and Al-Gharrawi, A. (2018), "Incremental filling ratio of pipe pile groups in sandy soil", Geomech. Eng., 15(1), 695-710. https://doi.org/10.12989/gae.2018.15.1.695.
  11. Hill, R. (1950), The Mathematical Theory of Plasticity, Clarendon Press.
  12. Keawsawasvong, S. and Ukritchon, B. (2016), "Ultimate lateral capacity of two dimensional plane strain rectangular pile in clay", Geomech. Eng., 11(2), 235-252. https://doi.org/10.12989/gae.2016.11.2.235.
  13. Khanmohammadi, M. and Fakharian, K. (2018), "Evaluation of performance of piled-raft foundations on soft clay: A case study", Geomech. Eng., 14(1), 43-50. https://doi.org/10.12989/gae.2018.14.1.043.
  14. Kim, Y.S. and Choi, J.I. (2017), "Nonlinear numerical analyses of a pile-soil system under sinusoidal bedrock loadings verifying centrifuge model test results", Geomech. Eng., 12(2), 239-255. https://doi.org/10.12989/gae.2017.12.2.239.
  15. Ko, J., Cho, J. and Jeong, S. (2018), "Analysis of load sharing characteristics for a piled raft foundation", Geomech. Eng., 16(4), 449-461. https://doi.org/10.12989/gae.2018.16.4.449.
  16. Kumara, J.J., Kurashina, T. and Kikuchi, Y. (2016), "Effects of pile geometry on bearing capacity of open-ended piles driven into sands", Geomech. Eng., 11(3), 385-400. https://doi.org/10.12989/gae.2016.11.3.385.
  17. Kwon, J., Kim, C., Im, J.C. and Yoo, J.W. (2018), "Effect of performance method of sand compaction piles on the mechanical behavior of reinforced soft clay", Geomech. Eng., 14(2), 175-185. https://doi.org/10.12989/gae.2018.14.2.175.
  18. Li, C. and Zou, J.F. (2019). "Created cavity expansion solution in anisotropic and drained condition based on Cam-Clay model." Geomech. Eng., 19(2), 141-151. https://doi.org/10.12989/gae.2019.19.2.141.
  19. Li, C., Zou, J.F. and Zhou, H. (2019b), "Cavity expansions in k0 consolidated clay", Eur. J. Environ. Civ. Eng., https://doi.org/10.1080/19648189.2019.1605937.
  20. Li, C., Zou, J.F., and A, S.G. (2019a), "Closed-form solution for undrained cavity expansion in anisotropic soil mass based on the spatially mobilized plane failure criterion", Int. J. Geomech., 19(7), 04019075. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001458.
  21. Li, L., Li, J. and Sun, D. (2016). "Anisotropically elasto-plastic solution to undrained cylindrical cavity expansion in K0-consolidated clay". Comput. Geotech., 73, 83-90. https://doi.org/10.1016/j.compgeo.2015.11.022.
  22. Li, L., Li, J. Sun, D. and Yue, Z. (2016), "Pile jacking-in effects considering stress anisotropy of natural clay", Chin. J. Rock Mech. Eng., 35(5), 1055-1064 (in Chinese).
  23. Randolph, M.F. (2003), "Science and empiricism in pile foundation design", Geotechnique, 53(10), 847-876. https://doi.org/10.1680/geot.2003.53.10.847.
  24. Randolph, M.F., Carter, J.P. and Wroth, C.P. (1979), "Driven piles in clay-the effects of installation and subsequent consolidation", Geotechnique, 29(4), 361-393. https://doi.org/10.1680/geot.1979.29.4.361.
  25. Sagaseta, C. and Whittle, A.J. (2001), "Prediction of ground movements due to pile driving in clay", J. Geotech. Geoenviron. Eng., 127(1), 55-66. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:1(55).
  26. Sagaseta, C., Whittle, A.J. and Santagata, M. (1997), "Deformation analysis of shallow penetration in clay", Int. J. Numer. Anal. Meth. Geomech., 21(10), 687-719. https://doi.org/10.1002/(SICI)1096-9853(199710)21:10<687::AID-NAG897>3.0.CO;2-3.
  27. Silvestri, V. and Abou-Samra, G. (2012), "Analytical solution for undrained plane strain expansion of a cylindrical cavity in modified Cam clay", Geomech. Eng., 4(1), 19-37. https://doi.org/10.12989/gae.2012.4.1.019.
  28. Sun, D.A., Matsuoka, H., and Yao, Y.P. (2004), "An anisotropic hardening elastoplastic model for clays and sands and its application to FE analysis", Comput. Geotech., 31(1), 37-46. https://doi.org/10.1016/j.compgeo.2003.11.003.
  29. Ukritchon, B., Faustino, J.C. and Keawsawasvong, S. (2016), "Numerical investigations of pile load distribution in pile group foundation subjected to vertical load and large moment", Geomech. Eng., 10(5), 577-598. https://doi.org/10.12989/gae.2016.10.5.577.
  30. Vesic, A.S. (1972), "Expansion of cavities in infinite soil mass", J. Soil Mech. Found. Div., 98(3), 265-290. https://trid.trb.org/view/125818. https://doi.org/10.1061/JSFEAQ.0001740
  31. Wang, S., and Yin, S. (2011), "A closed-form solution for a spherical cavity in the elastic-brittle-plastic medium", Tunn. Undergr. Sp. Technol., 26(1), 236-241. https://doi.org/10.1016/j.tust.2010.06.005.
  32. Xiao, Y., Sun, Y., Yin, F., Liu, H. and Xiang, J. (2016), "Constitutive modeling for transparent granular soils", Int. J. Geomech., 04016150. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000857.
  33. Yu, H.S. (2000), Cavity Expansion Methods in Geomechanics, Kluwer Academic Publishers.
  34. Yu, H.S. and Houlsby, G.T. (1991), "Finite cavity expansion in dilatant soils: loading analysis", Geotechnique, 42(4), 649-654. https://doi.org/10.1680/geot.1991.41.2.173.
  35. Zhou, H., Liu, H., Kong, G. and Huang, X. (2014), "Analytical solution of undrained cylindrical cavity expansion in saturated soil under anisotropic initial stress", Comput. Geotech., 55(2), 232-239. https://doi.org/10.1016/j.compgeo.2013.09.011.
  36. Zhou, H., Liu, H., Randolph, M.F., Kong, G. and Cao, Z. (2017), "Experimental and analytical study of X-section cast-in-place concrete pile installation influence", Int. J. Phys. Model. Geotech., 17(2), 1-19. https://doi.org/10.1680/jphmg.15.00037.
  37. Zou, J. F., Wei, A. and Yang, T. (2018), "Elasto-plastic solution for shallow tunnel in semi-infinite space", Appl. Math. Model., 64(12), 669-687. https://doi.org/10.1016/j.apm.2018.07.049.
  38. Zou, J.F. and Wei, X.X. (2018), "An improved radius-incremental-approach of stress and displacement for strain-softening surrounding rock considering hydraulic-mechanical coupling", Geomech. Eng., 16(1), 59-69. https://doi.org/10.12989/gae.2018.16.1.059.
  39. Zou, J.F. and Zhang, P.H. (2019), "Analytical model of fully grouted bolts in pull-out tests and in situ rock masses", Int. J. Rock. Mech. Min. Sci., 113(1), 278-294. https://doi.org/10.1016/j.ijrmms.2018.11.015.
  40. Zou, J.F., Chen, G. and Qian, Z. (2019), "Tunnel face stability in cohesion-frictional soils considering the soil arching effect by improved failure models", Comput. Geotech., 106, 1-17. https://doi.org/10.1016/j.compgeo.2018.10.014.
  41. Zou, J.F., Chen, K.F. and Pan, Q.J. (2017), "Influences of seepage force and out-of-plane stress on cavity contracting and tunnel opening", Geomech. Eng., 13(6), 907-928. https://doi.org/10.12989/gae.2017.13.6.907.