DOI QR코드

DOI QR Code

Evolution of sandstone shear strength parameters and its mesoscopic mechanism

  • Shi, Hao (State Key Laboratory for Geomechanics & Deep Underground Engineering, School of Mechanics & Civil Engineering, China University of Mining and Technology) ;
  • Zhang, Houquan (State Key Laboratory for Geomechanics & Deep Underground Engineering, School of Mechanics & Civil Engineering, China University of Mining and Technology) ;
  • Song, Lei (State Key Laboratory for Geomechanics & Deep Underground Engineering, School of Mechanics & Civil Engineering, China University of Mining and Technology)
  • 투고 : 2019.11.25
  • 심사 : 2019.12.26
  • 발행 : 2020.01.10

초록

It is extremely important to obtain rock strength parameters for geological engineering. In this paper, the evolution of sandstone cohesion and internal friction angle with plastic shear strain was obtained by simulating the cyclic loading and unloading tests under different confining pressures using Particle Flow Code software. By which and combined with the micro-crack propagation process, the mesoscopic mechanism of parameter evolution was studied. The results show that with the increase of plastic shear strain, the sandstone cohesion decreases first and then tends to be stable, while the internal friction angle increases first, then decreases, and finally maintains unchanged. The evolution of sandstone shear strength parameters is closely related to the whole process of crack formation, propagation and coalescence. When the internal micro-cracks are less and distributed randomly and dispersedly, and the rock shear strength parameters (cohesion, internal friction angle) are considered to have not been fully mobilized. As the directional development of the internal micro-fractures as well as the gradual formation of macroscopic shear plane, the rock cohesion reduces continuously and the internal friction angle is in the rise stage. As the formation of the macroscopic shear plane, both the rock cohesion and internal friction angle continuously decrease to a certain residual level.

키워드

과제정보

연구 과제 주관 기관 : Central Universities, National Natural Science Foundation of China

Financial supports for this work, provided by the Fundamental Research Funds for the Central Universities (No. 2018ZDPY08), the National Natural Science Foundation of China (No. 41974164) and the Chinese Government Scholarships (No. 201906420030), are gratefully acknowledged.

참고문헌

  1. Calik, U. and Sadoglu, E. (2014), "Classification, shear strength, and durability of expansive clayey soil stabilized with lime and perlite", Nat. Hazards, 71(3), 1305-1305. https://doi.org/10.1007/s11069-014-1033-7.
  2. Carpenter, B.M., Marone, C. and Saffer, D.M. (2011), "Weakness of the San Andreas Fault revealed by samples from the active fault zone", Nat. Geos., 4(4), 251-254. https://doi.org/10.1038/NGEO1089.
  3. Castro-Filgueira, U., Alejano, L.R., Arzua, J. and Ivars, D.M. (2017), "Sensitivity analysis of the micro-parameters used in a PFC analysis towards the mechanical properties of rocks", Procedia. Eng., 191, 488-495. https://doi.org/10.1016/j.proeng.2017.05.208.
  4. Comanici, A.M. and Barsanescu, P.D. (2016), "Considerations on elliptical failure envelope associated to Mohr-Coulomb criterion", IOP Conf. Ser. Mater. Sci. Eng., 145(4), 042006. https://doi.org/10.1088/1757-899X/145/4/042006.
  5. Edelbro, C. (2009), "Numerical modelling of observed fallouts in hard rock masses using an instantaneous Cohesion-softening Friction-hardening model", Tunn. Undergr. Sp. Technol., 24(4), 398-409. https://doi.org/10.1016/j.tust.2008.11.004.
  6. Edelbro, C. (2010), "Different approaches for simulating brittle failure in two hard rock mass cases: A parametric study", Rock Mech. Rock Eng., 43(2), 151-165. https://doi.org/10.1007/s00603-008-0025-x.
  7. Haeberli, W., Noetzli, J., Arenson, L., Delaloye, R., Gartner-Roer, I. and Gruber, S. (2010), "Mountain permafrost: development and challenges of a young research field", J. Glaciol., 56(200), 1043-1058. https://doi.org/10.3189/002214311796406121.
  8. Hajiabdolmajid, V., Kaiser, P. and Martin, C.D. (2003), "Mobilized strength components in brittle failure of rock", Geotechnique, 53(3), 327-336. https://doi.org/10.1680/geot.53.3.327.37280.
  9. Joseph, T.G. (2000), "Estimation of the post-failure stiffness of rock", Ph.D. Dissertation, University of Alberta, Alberta, Canada.
  10. Langford, J.C. and Diederichs, M.S. (2015), "Reliable support design for excavations in brittle rock using a global response surface method", Rock Mech. Rock Eng., 48(2), 669-689. https://doi.org/10.1007/s00603-014-0567-z.
  11. Li, P.F., Zhao, X.G., Guo, Z., Ma, L.K., Chen, L. and Wang, J. (2017), "Variation of strength parameters of Beishan granite under triaxial compression", Chin. J. Rock Mech. Eng., 36(7), 1599-1610. https://doi.org/10.13722/j.cnki.jrme.2016.1412 (in Chinese).
  12. Martin, C.D. and Changler, N.A. (1994), "The progressive fracture of Lac du Bonnet granite", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 31(6), 643-659. https://doi.org/10.1016/0148-9062(94)90005-1
  13. Qin, Z., Fu, H. and Chen, X. (2019), "A study on altered granite meso-damage mechanisms due to water invasion-water loss cycles", Environ. Earth Sci., 78(14), 428. https://doi.org/10.1007/s12665-019-8426-6.
  14. Rafiei, H.R. and Martin, C.D. (2018), "Cohesion degradation and friction mobilization in brittle failure of rocks", Int. J. Rock Mech. Min. Sci., 106, 1-13. https://doi.org/10.1016/j.ijrmms.2018.04.003.
  15. Shan, P.F. and Lai, X.P. (2019), "Mesoscopic structure PFC similar to 2D model of soil rock mixture based on digital image", J. Vis. Commun. Image R., 58, 407-415. https://doi.org/10.1016/j.jvcir.2018.12.015.
  16. Shi, H., Song L., Zhang, H.Q., Xue, K.K., Yuan, G.T., Wang, Z.S. and Wang, G.Z. (2019a), "Numerical study on mechanical and failure properties of sandstone based on the power-law distribution of pre-crack length", Geonech. Eng., 19(5), 421-434. https://doi.org/10.12989/gae.2019.19.5.421.
  17. Shi, H., Zhang, H.Q., Song, L. and Wu, Y. (2019b), "Variation of strata pressure and axial bolt load at a coal mine face under the effect of a fault", Arch. Min. Sci., 64(2), 351-374. https://doi.org/10.24425/ams.2019.128688.
  18. Sun, C., Cao, S. and Li, Y. (2017), "Mesomechanics coal experiment and an elastic-brittle damage model based on texture features", Int. J. Min. Sci. Technol., 28(04), 639-647. https://doi.org/10.1016/j.ijmst.2017.11.003.
  19. Wang, J., Li, S.C, Li, L.P., Lin, P., Xu, Z.H. and Gao, C.L. (2019), "Attribute recognition model for risk assessment of water inrush", Bull. Eng. Geol. Environ., 78(2), 1057-1071. https://doi.org/10.1007/s10064-017-1159-4
  20. Wang, X. and Tian, L.G. (2018), "Mechanical and crack evolution characteristics of coal-rock under different fracture-hole conditions: a numerical study based on particle flow code", Environ. Earth Sci., 77(8), 297. https://doi.org/10.1007/s12665-018-7486-3.
  21. Wu, J.Y., Feng, M.M., Mao, X.B., Xu, J.M., Zhang, W.L., Ni, X.Y. and Han, G.S. (2018b) "Particle size distribution of aggregate effects on mechanical and structural properties of cemented rockfill: Experiments and modeling", Constr. Build. Mater., 193, 295-311. https://doi.org/10.1016/j.conbuildmat.2018.10.208.
  22. Wu, J.Y., Feng, M.M., Yu, B.Y. and Han, G.S. (2018a), "The length of pre-existing fissures effects on the mechanical properties of cracked red sandstone and strength design in engineering", Ultrasonics, 82(1), 188-199. https://doi.org/10.1016/j.ultras.2017.08.010.
  23. Zhang, F., Sheng, Q., Zhu, Z.Q. and Zhang, Y.H. (2008), "Study on post-peak mechanical behavior and strain-softing model of Three Gorges granite", Chin. J. Rock Mech. Eng., 27 (Supp.1), 2 651-2 655. https://doi.org/1000-6915(2008)supp1-2651-05 (in Chinese).
  24. Zhang, H.Q., Nunoo, S., Tannant, D.D. and Wang, S.Y. (2015), "Numerical study of the evolution of cohesion and internal friction in rock during the pre-peak deformation process", Arab. J. Geosci., 8(6), 3501-3513. https://doi.org/10.1007/s12517-014-1508-6.
  25. Zhang, P., Li, N., Li, X.B. and Nordlund, E. (2009), "Compressive failure model for brittle rocks by shear faulting and its evolution of strength components", Int. J. Rock Mech. Min. Sci., 46(5), 830-841. https://doi.org/10.1016/j.ijrmms.2009.01.002.
  26. Zhang, R., Jiang, Z., Sun, Q. and Zhu, S. (2013) "The relationship between the deformation mechanism and permeability on brittle rock", Nat. Hazards, 66(2), 1179-1187. https://doi.org/10.1007/s11069-012-0543-4

피인용 문헌

  1. Failure characteristics of sandstone specimens with randomly distributed pre-cracks under uniaxial compression vol.79, pp.9, 2020, https://doi.org/10.1007/s12665-020-08933-4