DOI QR코드

DOI QR Code

유공강판의 횡력저항능력에 대한 실험적 연구

Experimental Study on the Characteristics of the Lateral Load Resistance of Perforated Steel Plates

  • 박정아 (군산대학교 지진전문인력양성사업단) ;
  • 이영욱 (군산대학교 건축해양건설융합공학부)
  • 투고 : 2020.03.05
  • 심사 : 2020.05.12
  • 발행 : 2020.05.30

초록

In this study, an experimental research was performed to find the characteristics of the lateral load resistance of perforated steel plates which could be developed to retrofit existing RC framed buildings. The Specimens are tested with variables such as aspect ratio of plate, the ratio of perforation area, and the ratio of perforated diameter to strip which is more than 0.6. The lateral load was applied with displacement control until to reach 3.5% drift ratio. Through the experimental results, it was shown that the maximum strength of all specimens were reached at around 0.5% drift ratio and maintained until 3.5% drift ratio. From results, the modified strength prediction formula was derived with the variable ratio of the perforated diameter to strip. To evaluate seismic retrofit performance of RC frames using perforated steel plate, a simple design process was presented.

키워드

과제정보

이 논문은 행정안전부의 방재안전분야 전문인력 양성사업의 지원을 받아 제작되었습니다.

참고문헌

  1. A. Formisano, L. Lombardi, & Salvatore Benfratello(2018). Low yield metals and perforated steel shear walls for seismic protection of existing RC buildings, Cogent Engineering, Vol. 5, 2018 - Issue 1 https://doi.org/10.1080/23311916.2018.1442109
  2. ACI. Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary. Farmington Hills, MI. c2005.
  3. Ahn, Ch., Yoon, J., Song, D., Chang, B., & Min, Ch.(2013). The design considerations of steel braced frame for seismic retrofit through increasing the lateral strength of existing RC buildings, Journal of the Earthquake Engineering Society of Korea, 17(6)
  4. Anjan K. Bhowmick, Gilbert Y. Grondin, & Robert G. Driver(2014). Nonlinear seismic analysis of perforated steel plate shear walls, Journal of Constructional Steel Research
  5. Basler, K.(1961). Strength of Plate Girders in Shear, ASCE Journal of the Structural Division, 87(7):151-180 https://doi.org/10.1061/JSDEAG.0000697
  6. Choi, I.(2009). Seismic behavior and of steel plate walls with thin infill plates, Thesis, Seoul National University
  7. Federal Emergency Management Agency, FEMA 356 Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Washington, D.C. 2000
  8. Ha, H., Oh, K., & Lee, K.(2018). Seismic Performance Evaluation of Reinforced Concrete Frames Reinforced with Chevron Bracing System, Journal of Korea Institute for Structural Maintenance and Inspection, 22(1)
  9. Kallol Barua(2016). Seismic Performance of Perforated Steel Plate Shear Walls Designed According to Canadian Seismic Provisions, Thesis, Concordia University(Canada)
  10. Kim, J., & Kim. J.(2004). Seismic Retrofit of a Chevron Braced Frame, Journal of the Architectural Institute of Korea Structure & Construction, 20(8)
  11. Kim, M., Choi, S., & Lee, Y.(2013). Seismic Capacity of Reinforced Concrete Frames Retrofitted with H-beam Frame, Journal of the Earthquake Engineering Society of Korea, 17(3)
  12. Kwack, J.(2004). Steel plate and composite shear walls subject to cyclic load, Thesis, Seoul National University
  13. Lee, B., & Moon, T.(2002). Researches and Applications of steel late shear walls, Journal of Korea Society of Steel Construction, 14(4)
  14. Lee, K., Wi, J., Kim, Y., & Lee, H.(2009). Seismic Safety Evaluation of Korean R/C School Buildings Built in the 1980s, Journal of Korea Institute for Structural Maintenance and Inspection, 13(5)
  15. M. N. Chimeh, & P. Homami(2012). 15th World Conference of Earthquake Engineering
  16. Ministry of Education(2018). Seismic Evaluation and Retrofit of Existing School Buildings
  17. Ministry of Land(2013). Infrastructure and Transport. Seismic Assessment of Existing Buildings
  18. Ministry of Land(2016). Infrastructure and Transport. Korean Building Code.
  19. Park, B., & Kwon, K.(2017). Development of External Reinforcement Method for Improvement on Seismic Performance of Masonry Infilled Wall, Journal of Korean Society of Hazard Mitigation, 17(3)
  20. Park, H., Kwack, J., Jeon, S., & Kim, W.(2004). Framed Steel Plate Wall subject to Cyclic Lateral Load, Journal of Korea Society of Steel Construction, 16(6)
  21. Park, H., Kim, W., Choi, I., & Jeon, S.(2006). Ductility Capacity of Shear-Dominated Steel Plate Walls, Journal of Korea Society of Steel Construction, 18(4)
  22. Park, J.(2020). Experimental Study on the Perforated Steel Plate System to Enhance the Stiffness of RC Moment Resistant Frames for Seismic Rehabilitation, Thesis, Kunsan National University
  23. Purba, R., & Bruneau, M.(2006). Design recommendations for perforated steel plate shear walls, Thesis, State Univ. of New York at Buffalo, Buffalo, N.Y.
  24. Roberts, T. M., & Sabouri-Ghomi, S.(1992). Hysteretic characteristics of unstiffened perforated steel plate shear panels. Thin-Walled Structures, 14
  25. Shin. S., & Oh. S.(2017). Spectral Analysis of Sep. 12, 2016 M5.8 Gyeongju Earthquake, Spring Annual Conference of AIK
  26. Thorburn, L.J., Kulak, G.L., & Montgomery, C.J.(1983). Analysis of Steel Plate Shear Walls, Structural Report No.107. Department of Civil and Environment Engineering. University of Alberta, Edmonton, AB.
  27. Timler, P.A., & Kulak, G.L.(1983). Experimental Study of Steel Plate Shear Walls. Structural Engineering Report No. 114. Dept. of Civil Engineering, University of Alberta, Edmonton, AB.
  28. Vian, D., & Bruneau, M.(2005). Steel Plate Shear Wall for Seismic design and retrofit of building structures. Technical Report No. MCEER -05-0010, Multidisciplinary Center for Earthquake Engineering Research, The State university of New York at Buffalo, Buffalo, N.Y. USA.
  29. Wagner, H.(1931). Flat Sheet Metal Girders with Very Thin Webs, Part-1 General Theories and Assumptions. Technical Memo No. 604. National Advisory Committee for Aeronautics. Washington, DC.