실험계획법을 이용한 Reel Tape Packaging 공정조건 분석

Analysis of Reel Tape Packing process conditions using DOE

  • 김재경 (공주대학교 생산기술연구소) ;
  • 나승준 (공주대학교 대학원 기계공학과) ;
  • 권준환 (공주대학교 대학원 기계공학과) ;
  • 전의식 (공주대학교 생산기술연구소)
  • Kim, Jae Kyung (Industrial Technology Research Institute, Kongju National University) ;
  • Na, Seung Jun (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Kwon, Jun Hwan (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Jeon, Euy Sik (Industrial Technology Research Institute, Kongju National University)
  • 투고 : 2020.06.26
  • 심사 : 2020.06.26
  • 발행 : 2020.06.30

초록

Today's placement machines can pick and place thousands of components per hour with a very high degree of accuracy. The packaged semiconductor chips are inserted into a carrier at regular intervals, covered with a tape to protect the chips from external impact, and supplied in a roll form. These packaging processes also progress rapidly in a consistent direction, affecting the peelback strength between the cover tape and carrier depending on the main process conditions. In this paper, we analyzed the main process variables that affect peelback strength in the reel tape packaging process for packaging semiconductor chips. The main effects and interactions were analyzed. The peelback strength range required in the packaging process was set as the nominal the best characteristics, and the optimum process condition satisfying this was derived.

키워드

참고문헌

  1. Song, J. S. and Park, T. H., "A Path Planning Algorithm for Dispenser Machines in Printed Circuit Board Assembly System", Journal of Control, Automation and Systems Engineering, Vol. 6, No. 6, pp. 506-513, 2000.
  2. Choi, J. H., Jeon, B. C., Cho, M. W., Moon, C. Y. and Lee, S. J., "A Study on the Performance Analysis for a Tape Feeder with Cam-slider Mechanism", Journal of the Korean Society of Precision Engineering, Vol. 23, No. 5, pp. 177-183, 2006.
  3. K.P. Ellis, F.J. Vittes, J.E. Kobza, "Optimizing the performance of a surface mount placement machine", IEEE Transactions on Electronic Packaging Manufacturing, Vol. 24, No. 3, pp. 160-170, 2001. https://doi.org/10.1109/6104.956801
  4. K. Lyou, Y. Moon, etc., "A Study on the Inspection Algorithm of FIC Device in Chip Mounter", Journal of Control, Automation and System Engineering, Vol. 4, No. 3, pp. 384-391, 1998.
  5. Lee, S. J., Kang, S. M., Lee, C. H., and Kim, Y. Y., "Mechanical Design and Evaluation of Linear Tape Feeder for Chip Mounter", Journal of the Korean Society of Precision Engineering, Vol. 23, No. 5, pp. 155-161, 2006.
  6. Il-Hyoung Cho, Nae-Hyun Lee, Soon-Woong Chang, "Analysis of Characteristics and Optimization of Photodegradation Condition of Reactive Orange 16 Using a Box-Behnken Method", Journal of Korean Society of Environmental Engineers, Vol. 28, No.9, pp.917-925, 2006.
  7. Jeon, Y. W., Kim, Y. S. and Jeon, E. S., "Analysis of Joule-heat Characteristics according to the DC-link Capacitor Film Geometrics", Journal of the Semiconductor & Display Technology, Vol. 19, No. 1, pp. 42-48, 2020.