대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제36권8호
  • /
  • Pages.153-159
  • /
  • 2020
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

합성수지 거푸집의 휨 성능평가 및 강성모델 제시

Evaluation on Flexural Behavior and Proposals of Stiffness Model for Synthetic Resin Formworks

  • 남경용 (유탑엔지니어링건축사사무소) ;
  • 이혜진 (경기대 건축공학과 일반대학원) ;
  • 양근혁 (경기대 건축공학과) ;
  • 문주현 (경기대 건축공학과)
  • 투고 : 2020.05.12
  • 심사 : 2020.08.18
  • 발행 : 2020.08.30
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study is to examine the flexural behavior of the developed synthetic resin formwork and propose a simple model for their stiffness (K) for straightforwardly determining a thickness of form to achieve the minimum requirements specified in KS F 5651. The deflection of the synthetic resin formworks was commonly greater than that of the euro form, indicating a lower flexural stiffness for the former than the latter. As a result, all synthetic resin formwork tested did not meet the deflection requirement of KS F 5651. The stiffness model was derived from strain compatibility, force equilibrium, and curvature distributions along the form length on the basis of the elasticity theorem, considering the tie-holes given in the form. The proposed model predicts accurately the slope of the load-displacement curve obtained from the foams under flexure. Using the proposed K model, design chart is developed for determining the thickness of formwork with different sizes and material properties.

키워드

참고문헌

  1. Chung, B. Y., Lee, G., Lee, H. C., & Go, S. S. (2007). A study on the development of recycled synthetic resins euro form, Journal of The Architectural Institute of Korea Structure & Construction, 23(6), 171-178.
  2. Chung, B. Y., Lee, H. C., Kim, J. H., & Go, S. S. (2010). Performance evaluation of recycled synthetic resins euro form by injection modeling method, Journal of the Korea Institute of Building Construction, 10(2), 105-113. https://doi.org/10.5345/JKIC.2010.10.2.105
  3. Go, S. S., Oh, J. H. (2002). The study on the risk assesment of formwork, Journal of the Korean Institute of Industrial Safety, 17(3), 96-101.
  4. Hyun, K. M., Choi, I. W., & Kim, O. K. (2005). Development of the formwork system for quality improvement on the kick-up of wall in the apartment house construction, Journal of The Architectural Institute of Korea Structure & Construction, 21(4), 173-178.
  5. Jeong, B. J., Hong, K. P., & Ha, S. W. (2009). The flexural behaviour of reinforced concrete beams with precast light weight concrete formwork, journal of The Architectural Institute of Korea Structure & Construction, 25(5), 95-102.
  6. Jeong, B. J., Lee, H. C., Kim, J. H., & Go, S. S. (2010). Performance evaluation of recycled synthetic resins euro form by injection modeling method, Journal of the Korea Institute of Building Construction, 10(2), 105-113. https://doi.org/10.5345/JKIC.2010.10.2.105
  7. Jeong, W. Y., & Weon, J. I. (2015). Characterization of thermal degradation for high density polyethylene mechanical and thermal behaviors and long-term lifetime prediction, Journal of The Polymer Society of Korea, 39(6), 873-879. https://doi.org/10.7317/pk.2015.39.6.873
  8. Kim, Y. C., Chung, K. S., & Lee, K. J. (1996). A basic study to develop sandwich panel for concrete formwork, Journal of The Architectural Institute of Korea Structure & Construction, 12(12), 243-251.
  9. Kim, J. Y., & Kim, J. H. (2010). A study on benefit cost analysis of formwork methods for high-rise residential buildings, Journal of the Korea Institute of Building Construction, 10(4), 49-57. https://doi.org/10.5345/JKIC.2010.10.4.049
  10. Kim, W. J., & Jung, S. J. (2002). The experiment study of for cement mortar permanent form's performance evaluation, Journal of The Architectural Institute of Korea Structure & Construction, 18(3), 133-140.
  11. Kim, T. H., Lee, M. D., Lee, U. K., Cho, H. H., & Kang, K. I. (2011). Photovoltaic application in system formwork operations of high-rise building construction, Journal of the Korea Institute of Building Construction, 11(2), 116-126. https://doi.org/10.5345/JKIC.2011.04.2.116
  12. Kim, T. H., Ahn, S. J., Lee, Y. D., & Nam, K. Y. (2018). A study on the performance evaluation and field application of synthetic Resin formwork, Journal of the Korea Institute of Building Construction, 18(6), 577-584. https://doi.org/10.5345/JKIBC.2018.18.6.577
  13. Korea Agency for Technology and Standards. (2019). Standard specification for plastic panels for concrete, KS F 5651. (in Korean)
  14. Lee, G., Lee, H. C., Lee, H. M., Chung, B. Y., & Go, S. S. (2010). A Study on the developing performance of a recycled synthetic resins euro form, Journal of the Korea Institute of Building Construction, 10(2), 625-632.
  15. Temporary construction standard specification. (2016). Ministry of Land Infrastructure and Transport. (in Korean)