DOI QR코드

DOI QR Code

Numerical simulation of the effect of missile impact on the concrete layers

  • Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology) ;
  • Abad, Shadman M. Bolban (Department of Mining Engineering, Hamedan University of Technology)
  • Received : 2019.12.28
  • Accepted : 2020.10.23
  • Published : 2020.11.25

Abstract

A two-dimensional particle flow cod (PFC) is used to study the effect of missile impact on the concrete target. For this purpose firstly calibration of numerical model was performed so that tensile strength of numerical models and experimental sample were the same. Secondly, a concrete model was built. The number of concrete layers and the angle of concrete layers related to horizontal axis were changed. Their numbers were 1, 2, 3 and 4. The angles were 0°, 15°, 30°, 45°, 60°, 75° and 90°. A semi-circle missile was simulated at top of the concrete layers. Its velocity in opposite side of Y direction was 100 m/s. three measuring circles were situated at the below the missile in the model to receive the applied force. The load in the missile and measuring circles together with failure pattern were registered at the beginning of the impaction. The results show that concrete layers number and concrete layers angle have important effect on the failure load while the failure pattern was nearly constant in all of the models.

Keywords

References

  1. Berriaud, C., Sokolovsky, A., Gueraud, R., Dulac, J. and Labrot, R. (1978), "Local behavior of reinforced concrete walls under missile impact", Nucl. Eng. Des., 45(2), 457-469. https://doi.org/10.1016/0029-5493(78)90235-2.
  2. Camborde, F., Mariotti, F. and Donze, F.V. (2000), "Numerical study of rock and concrete behavior by discrete element modelling", Comput. Geotech., 27(4), 225-247. https://doi.org/10.1016/S0266-352X(00)00013-6.
  3. Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granular assemblies", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1979.29.1.47.
  4. Donze, F.V. and Magnier, S.A. (1997), "Spherical discrete element code", Discrete Element Project Report No. 2, GEOTOP, Universite du Quebec a Montreal.
  5. Fullard, K., Baum, M.R. and Barr, P. (1991), "The assessment of impact on nuclear power plant structures in the United Kingdom", Nucl. Eng. Des., 130(2), 113-120. https://doi.org/10.1016/0029-5493(91)90120-7.
  6. Haeri, H. and Sarfarazi, V. (2016a), "The effect of micro pore on the characteristics of crack tip plastic zone in concrete", Comput. Concrete, 17(1), 107-12. https://doi.org/10.12989/cac.2016.17.1.107.
  7. Haeri, H. and Sarfarazi, V. (2016b), "The effect of non-persistent joints on sliding direction of rock slopes", Comput. Concrete, 17(6), 723-737. https://doi.org/10.12989/cac.2016.17.6.723.
  8. Haeri, H. and Sarfarazi, V. (2016c), "The deformable multilaminate for predicting the elasto-plastic behavior of rocks", Comput. Concrete, 18, 201-214. https://doi.org/10.12989/cac.2016.18.2.201.
  9. Haeri, H., Sarfarazi, V. and Lazemi, H.A. (2016d), "Experimental study of shear behavior of planar non-persistent joint", Comput. Concrete, 17(5), 639-653. https://doi.org/10.12989/cac.2016.17.5.649.
  10. Heckotter, C. and Vepsa, A. (2015), "Experime ntal investigation and num erical analyses of reinforced concrete structures subjected to external missile impact", Prog. Nucl. Energy, 32, 1-12. https://doi.org/10.1016/j.pnucene.2015.02.007.
  11. Heckotter, C. and Sievers, J. (2013), "Simulation of impact tests with hard, soft and liquid fi lled missiles on reinforced concrete structures", Trans. ASME J. Appl. Mech., 80, 031805. https://doi.org/10.1115/1.4023391.
  12. Hentz, S., Daudeville, L. and Donze, F.V. (2004a), "Identification and validation of a discrete element model for concrete", J. Eng. Mech., 130(6), 709-719. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(709).
  13. Hentz, S., Daudeville, L. and Donze, F.V. (2004b), "Discrete element modelling of concrete submitted to dynamic loading at high strain rates", Comput. Struct., 82(9), 2509-2524. https://doi.org/10.1016/j.compstruc.2004.05.016.
  14. Hughes, G. (1984), "Hard missile impact on reinforced concrete", Nucl. Eng. Des., 77(1), 23-35. https://doi.org/10.1016/0029-5493(84)90058-X.
  15. Iwashita, K. and Oda, M. (2000), "Micro-deformation mechanism of shear banding process based on modified distinct element method", Powder Technol., 109, 192-205. https://doi.org/10.1016/S0032-5910(99)00236-3.
  16. Li, G. (2004), "The effect of moisture content on the tensile strength properties of concrete", Thesis, The Graduate School, The University of Florida.
  17. Li, Q.M. and Tong, D.J. (2003), "Perforation thickness and ballistic limit of concrete target subjected to rigid projectile impact", J. Eng. Mech., 129(9), 1083-1091. doi.org/10.1061/(ASCE)0733-9399(2003)129:9(1083).
  18. Li, Q.M., Reid, S.R., Wen, H.M. and Telford, A.R. (2006), "Local impact effects of hard missiles on concrete targets", Int. J. Impact Eng., 32(4), 224-284. https://doi.org/10.1016/j.ijimpeng.2005.04.005.
  19. Magnier, S.A. and Donze, F.V. (1998), "Numerical simulations of impacts using a discrete element method", Mech. Cohesive-Frict. Mater., 3(3), 257-276. https://doi.org/10.1002/(SICI)1099-1484(199807)3:3<257::AID-CFM50>3.0.CO;2-Z
  20. Masuya, H., Kajikawa, Y. and Nakata, Y. (1994), "Application of the distinct element method to the analysis of the concrete members under impact", Nucl. Eng. Des., 150(3), 367-377. https://doi.org/10.1016/0029-5493(94)90156-2.
  21. Nassr, A.A., Razaqpur, A.G. and Campidelli, M. (2017), "Effect of initial blast response on RC beams failure modes", Nucl. Eng. Des., 320, 437-451. https://doi.org/10.1016/j.nucengdes.2017.06.019.
  22. Nishida, A. (2019), "Evaluation of local damage to reinforced concrete panels subjected to oblique impact by soft missile", Nucl. Eng. Des., 350, 116-127. https://doi.org/10.1016/j.nucengdes.2019.04.024.
  23. Nishida, A., Nagai, M., Tsubota, H. and Li, Y. (2018), "Evaluation of local damage to reinforced concrete panels subjected to oblique impact-simulation analysis for evaluating perforation phenomena caused by oblique impact of deformable projectiles", Mech. Eng J., 5, 5-12. https://doi.org/10.1299/mej.18-00087.
  24. Particle Flow Code in 3 Dimensions PFC2D (2003), Version 3.0, Itasca Consulting Group Inc., Minneapolis, Minnesota.
  25. Potapov, A.A., Hopkins, M.A. and Campbell, C.S. (1995), "A two-dimensional dynamic simulation of solid fracture part I: description of the model", Int. J. Modern Phys., 6(3), 371-398. https://doi.org/10.1142/S0129183195000277.
  26. Potyondy, D.O., Cundall, P.A. and Lee, C.A. (1996), "Modelling rock using bonded assemblies of circular particles, in rock mechanics tools and techniques", Proc. Second North American Rock Mechanics Symposium, Montreal, June.
  27. Riera, J.D. and Iturrioz, I. (1998), "Discrete elements model for evaluating impact and impulsive response of reinforced concrete plates and shells subjected to impulsive loading'," Nucl. Eng. Des., 179(2), 135-144. https://doi.org/10.1016/S0029-5493(97)00270-7.
  28. Sarfarazi, V. and Haeri, H., (2016a), "Effect of number and configuration of bridges on shear properties of sliding surface", J. Min. Sci., 52(2), 245-257. https://doi.org/10.1134/S1062739116020370.
  29. Sarfarazi, V., Faridi, H.R., Haeri, H. and Schubert, W. (2016b), "A new approach for measurement of anisotropic tensile strength of concrete", Adv. Concrete Constr., 3(4), 269-284. https://doi.org/10.12989/acc.2015.3.4.269.
  30. Sarfarazi, V., Ghazvinian, A., Schubert, W., Blumel, M. and Nejati, H.R. (2014), "Numerical simulation of the process of fracture of Echelon rock joints", Rock Mech. Rock Eng., 47(4), 1355-1371. https://doi.org/10.1007/s00603-013-0450-3.
  31. Sarfarazi, V., Haeri, H., Shemirani, A. and Zhu, Z. (2017), "Shear behavior of non-persistent joint under high normal load", Strength Mater., 49, 320-334. https://doi.org/10.1007/s11223-017-9872-6.
  32. Shiu, W, Donze, F.V. and Daudeville, L. (2008a), "Penetration prediction of missiles with different nose shapes by the discrete element numerical approach", Comput. Struct., 86, 2079-2086. https://doi.org/10.1016/j.compstruc.2008.03.003.
  33. Shiu, W, Donze, F.V. and Daudeville, L. (2008b), "Compaction process in concrete during missile impact: a DEM analysis", Comput. Concrete, 5(4), 329-342. https://doi.org/10.12989/cac.2008.5.4.329
  34. Shiu, W. and Donze, F. (2009), "Discrete element modelling of missile impacts on a reinforced concrete target", Int. J. Comput. Appl. Technol., 34(1), 33-41. https://doi.org/10.1504/IJCAT.2009.022700.
  35. Thai, D.K. and Kim, S.E. (2016), "Fluid effect of the water-filled missile on impact force", Int. J. Impact Eng., 90, 95-105. https://doi.org/10.1016/j.ijimpeng.2015.12.004.
  36. Williams, M.S. (1994), "Modeling of local impact effects on plain and reinforced concrete", ACI Struct. J., 91(2), 178-187. https://doi.org/10.1016/j.ijimpeng.2015.12.004.