극저온 식각장비용 정전척 쿨링 패스 온도 분포 해석

Temperature Analysis of Electrostatic Chuck for Cryogenic Etch Equipment

  • 두현철 (명지대학교 전자공학과) ;
  • 홍상진 (명지대학교 전자공학과)
  • Du, Hyeon Cheol (Department of Electronics Engineering, Myongji University) ;
  • Hong, Sang Jeen (Department of Electronics Engineering, Myongji University)
  • 투고 : 2021.06.08
  • 심사 : 2021.06.21
  • 발행 : 2021.06.30

초록

As the size of semiconductor devices decreases, the etching pattern becomes very narrow and a deep high aspect ratio process becomes important. The cryogenic etching process enables high aspect ratio etching by suppressing the chemical reaction of reactive ions on the sidewall while maintaining the process temperature of -100℃. ESC is an important part for temperature control in cryogenic etching equipment. Through the cooling path inside the ESC, liquid nitrogen is used as cooling water to create a cryogenic environment. And since the ESC directly contacts the wafer, it affects the temperature uniformity of the wafer. The temperature uniformity of the wafer is closely related to the yield. In this study, the cooling path was designed and analyzed so that the wafer could have a uniform temperature distribution. The optimal cooling path conditions were obtained through the analysis of the shape of the cooling path and the change in the speed of the coolant. Through this study, by designing ESC with optimal temperature uniformity, it can be expected to maximize wafer yield in mass production and further contribute to miniaturization and high performance of semiconductor devices.

키워드

과제정보

연구는 경기도 소재부품장비자립화 지원사업 (No. AICT-006-T1)의 지원으로 수행되었으며, 산업통상자원부 반도체소재부품장비 전문인력양성사업단의 학술적 토론과 자문에 감사드립니다.

참고문헌

  1. M. Lapedus, "Cryogenic Etch Re-Emerges", Semiconductor Engineering, Sept. 20th, 2018.
  2. S. Aachboun, P. Ranson, C. Hilbert, and M. Boufnichel, "Cryogenic Etching of Deep Narrow Trenches in Silicon", J. Vac. Sci. Technol. A, Vol. 18, No. 4, pp. 1848-1852, 2000. https://doi.org/10.1116/1.582434
  3. M. W. Pruessner, W. S. Rabinovich, T. H. Stievater, D. Park, and J. Baldwin, "Cryogenic Etch Process Development for Profile Control of High Aspect-Ratio Submicron Silicon Trenches", J. Vac. Sci. Technol. B, Vol. 25, No. 1, pp. 21-28, 2007. https://doi.org/10.1116/1.2402151
  4. L. Weidenfeller, M. Hofmann, S. Supreeti, S. Mechold, M. Holz, C. Reuter, E. Manske, W. W. Rangelow, "Cryogenic Etch for Pattern Transfer into Silicon of Mix-and-Match Structured Resist Layers", Microelectronic Eng., Vol. 227, p. 111325, 2020. https://doi.org/10.1016/j.mee.2020.111325
  5. S. Aachboun, P. Ranson, C. Hilbert, and M. Boufnichel, "Cryogenic Etching of Deep Narrow Trenches in Silicon", J. Vac. Sci. Technol. A, Vol. 18, No. 4, pp. 1848-1852, 2000. https://doi.org/10.1116/1.582434
  6. Y Tang, A Sandoughsaz, K. J. Owen, K. Najafi, "Ultra Deep Reactive Ion Etching of High Aspect-Ratio and Thick Silicon Using a Ramped-Parameter Process", Journal of Microelectromechanical Systems, Vol. 27, No. 4, pp. 1-13, 2018. https://doi.org/10.1109/JMEMS.2017.2782748
  7. S. Patel and R. Mitchell, "Cryogenic Cooled Rotatable Electrostatic Chuck", U.S. Patent 2019/0181028 A1, Jun. 13, 2019.
  8. Y. Momiyama, H. Sasaki, "Cryogenic electrostatic chuck", U.S. Patent 2020/0312694 A1, Oct. 1, 2020.
  9. C. Lee, S. Byun, C. Song, S. Jeong, and D. Han, "Method of Etching at Low Temperature and Plasma Etching Apparatus", U.S. Patent 2019/0385860 A1, Dec. 19, 2019.
  10. D. H. Kim, K. S. Kim, "A Study on Electrostatic Chuck Cooling by Ceramic Dielectric Material and Coolant path", Journal of the Semiconductor & Display Technology, Vol. 17, No. 3, pp. 85-89, 2018.
  11. K. M. Jang, K. S. Kim, "A Study on Temperature Characteristics according to Ceramic Material Stacking Sequence of Electrostatic Chuck Surface", Journal of the Semiconductor & Display Technology, Vol. 16, No. 3, pp. 116-120, 2017.
  12. H. Kersten, H. Deutsch, H. Steffen, G. M. W. Kroesen, R. Hippler "The energy balance at substrate surfaces during plasma processing", Vacuum, Vol. 63, No. 3, pp. 385-431, 2001. https://doi.org/10.1016/S0042-207X(01)00350-5
  13. Y-D. Lim, D-Y. Lee, W.J. Yoo, "Temperature of a Semiconducting Substrate Exposed to an Inductively Coupled Plasma", Journal of the Korean Physical Society, Vol. 59, No. 2, pp. 262-270, 2011. https://doi.org/10.3938/jkps.59.262
  14. Z. Liu, B. He, F. Meng, Q. Bao, Y. Sun, S. Sun, G. Zhou, X. Cao, H. Xin, "Contact etch process optimization for RF process wafer edge yield improvement", Journal of Semiconductor, Vol. 40, No. 12, 2019.