DOI QR코드

DOI QR Code

Deformation modulus of rock foundation in Deriner Arch Dam

  • Yilmaz, Davut (Department of Civil Engineering, Ankara Yildirim Beyazit University) ;
  • Altunisik, Ahmet C. (Department of Civil Engineering, Karadeniz Technical University) ;
  • Adanur, Suleyman (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2021.04.03
  • 심사 : 2021.06.24
  • 발행 : 2021.07.10

초록

The reliability of reinforced concrete structures is frequently compromised by the deterioration caused by reinforcement corrosion. Evaluating the effect caused by reinforcement corrosion on structural behaviour of corrosion damaged concrete structures is essential for effective and reliable infrastructure management. In lifecycle management of corrosion affected reinforced concrete structures, it is difficult to correctly assess the lifecycle performance due to the uncertainties associated with structural resistance deterioration. This paper presents a stochastic deterioration modelling approach to evaluate the performance deterioration of corroded concrete structures during their service life. The flexural strength deterioration is analytically predicted on the basis of bond strength evolution caused by reinforcement corrosion, which is examined by the experimental and field data available. An assessment criterion is defined to evaluate the flexural strength deterioration for the time-dependent reliability analysis. The results from the worked examples show that the proposed approach is capable of evaluating the structural reliability of corrosion damaged concrete structures.

키워드

참고문헌

  1. Aksoy, C.O., Uyar Aksoy, G.G., Guney, A., Ozacar, V. and Yaman, H.E. (2020), "Influence of time-dependency on elastic rock properties under constant load and its effect on tunnel stability". Geomech. Eng., 20(1), 1-7. http://doi.org/10.12989/gae.2020.20.1.001.
  2. Angin, Z. (2016), "Geotechnical field investigation on Giresun hazelnut licenced warehause and spot exchange", Geomech. Eng., 10(4), 547-563. https://doi.org/10.12989/gae.2016.10.4.547.
  3. Agharazi, A., Martin, C.D. and Tannant, D.D. (2015), "Numerical analysis of plate-load test results on fractured rocks using an equivalent-continuum model: Case study of the Bakhtiary dam site", Int. J. Geomech., 15(1), 05014001, 1-11. https://doi.org/10.1061/(ASCE)gm.1943-5622.0000415.
  4. ARQ Consulting. (2016), "Yusufeli dam and HEPP", Report on Dam Foundation Strengthening, Revision-1, Artvin, Turkey.
  5. Barton, N. (2007), Rock Quality, Seismic Velocity, Attenuation and Anisotrophy, Taylor and Francis Group, London, U.K.
  6. Bieniawski, Z.T. (1978), "Determining rock mass deformability: experience from case histories", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 15(5), 237-247. https://doi.org/10.1016/0148-9062(78)90956-7.
  7. Coon, R.F. and Merritt, A.H. (1970), Predicting In-Situ Modulus of Deformation using Rock Quality Indexes, ASTM Special Technical Publication, Philadelphia, U.S.A.
  8. Deere, D. (1976), "Dams on rock foundations, some design questions", Proceedings of the Rock Engineering for Foundations and Slopes Conference, Boulder, Colorado, U.S.A.
  9. Deere, D.U., Hendron, A.J., Patton, F.D. and Cording, E.J. (1968), "Design of surface and near-surface construction in rock", Proceedings of the 8th Symposium on Rock Mechanics (USRMS), Minneapolis, Minnesota, U.S.A., September.
  10. Dodds, D.J. and Schroeder, W.L. (1974), "Factors bearing on the interpretation of in-situ testing results", Proceedings of the 2nd Rapid Excavation and Tunnelling Conference, San Francisco, California, U.S.A., June.
  11. DSI. (1999), "Deriner dam final design drawings", State Hydraulic Works of Turkey, Ankara, Turkey.
  12. DSI. (2015), "Hydraulic jack and dilatometer test report", Yusufeli Dam and Hydropower Plant Project, Artvin, Turkey.
  13. Electrowatt Engineering Ltd and Dolsar Engineering Ltd. (2014), Deriner dam and hydroelectric power plant, Geodetic Dam Monitoring I8 Readings After Completion of Impounding, Technical Report, Artvin, Turkey.
  14. Eroglu, V. and Yilmaz, D. (2005), "Approaches considered to overcome uncertainties at Cine dam", Proceedings of the ICOLD Annual Meeting, Iran.
  15. Fan, Q., Zhou, S. and Yang, N. (2015), "Optimization design of foundation excavation for Xiluodu super-high arch dam in China", J. Rock Mech. Geotech. Eng., 7, 120-135. https://doi.org/10.1016/j.jrmge.2015.03.001.
  16. Galera, J.M., Alvarez, M. and Bieniawski, Z.T. (2005), "Evaluation of the deformation modulus of rock masses: comparison of pressuremeter and dilatometer tests with RMR prediction", Proceedings of the ISP5-Pressio International Symposium, France.
  17. Geoconsult GIBB and ARQ. (2000), "Cine RCC dam", Phase II Design Reports, Volume 1-4, and Final Design Drawings, Artvin, Turkey.
  18. Hall, W.J., Newmark, N.M. and Hendron, A.J. (1974), "Classification, engineering properties and field exploration of soils, intact rock and in situ rock masses", Directorate of Regulatory Standards, US Atomic Energy Commission, USA.
  19. Herzog, M.A.M. (1999), Practical Dam Analysis, ICE Publishing, Thomas Telford.
  20. Hoek, E. and Diederichs, M.S. (2006), "Empirical estimation of rock mass modulus", Int. J. Rock Mech. Min. Sci., 43, 203-215. https://doi.org/10.1016/j.ijrmms.2005.06.005.
  21. Ito, Y., Agui, K., Kikuchi, K., Fujieda, M., Kobayashi, T. and Saito, T. (2007), "Brief and systematic evaluation for deformation characteristics of dam site rock mass by shock response value", Proceedings of the 11th Congress of the International Society for Rock Mechanics: The Second Half Century of Rock Mechanics, July, Lisbon, Portugal.
  22. Kayabasi, A., Gokceoglu, C. and Ercanoglu, M. (2003), "Estimating the deformation modulus of rock masses: A comparative study", Int. J. Rock Mech. Min. Sci., 40, 55-63. https://doi.org/10.1016/S1365-1609(02)00112-0.
  23. Konakoglu, B., Cakir, L. and Yilmaz, V. (2020), "Monitoring the deformation of a concrete dam: A case study on the Deriner Dam, Artvin, Turkey", Geomatics Nat. Hazards Risk, 11(1), 160-177. https://doi.org/10.1080/19475705.2020.1714755.
  24. Lee, S.W. (2019), "Experimental study on effect of underground excavation distance on the behavior of retaining wall", Geomech. Eng., 17(5), 413-420. http://doi.org/10.12989/gae.2019.17.5.413.
  25. Li, W. (2017), "Experiment study on the whole deformation process of arch dam bedrock", Proceedings of 9th International Economics, Management and Education Technology Conference, Taiyuan, China, July.
  26. Liu, Y., He, Z., Yang, Q., Deng, J. and Xue, L. (2017), "Long-term stability analysis for high arch dam based on time-dependent deformation reinforcement theory", Int. J. Geomech., 17(4), 04016092. https://doi.org/10.1061/(ASCE)gm.1943-5622.0000760.
  27. Nonveiller, E. (1989), "Grouting theory and practice", Developments in Geotechnical Engineering, 57, 1-250. https://doi.org/10.1016/B978-0-444-87400-9.50005-1
  28. Oberti, G., Bavestrello, F., Rossi, P.P. and Flamingi, F. (1986), "Rock mechanics investigations, design and construction of the Ridracoli Dam", Rock Mech. Rock Eng., 19(3), 113-142. https://doi.org/ 10.1007/BF01024952.
  29. Oberti, G., Carabelli, E., Goffi, L. and Rossi, P.P. (1979), "Study of an orthotropic rock mass: Experimental techniques, comparative analysis of results", Proceedings of the 4th Congress International Society for Rock Mechanics, Montreux, Switzerland, September.
  30. Palmstrom, A. and Singh, R. (2001), "The deformation modulus of rock masses-comparisons between in situ tests and indirect estimates", Tunn. Undergr. Sp. Tech., 16(2), 115-131. https://doi.org/10.1016/S0886-7798(01)00038-4.
  31. Rocha, M. (1970), New techniques in deformability testing of in situ rock masses, in determination of the in-situ modulus of deformation of rock, A.S.T.M. Special Technical Publication, 477, 39-54, A.S.T.M., Philadelphia.
  32. Rocha, M. (1974), "Present possibilities of studying foundations of concrete dams", Proceedings 3rd International Congress on Rock Mechanics, Denver, Colorado, U.S.A.
  33. Scott, G.A. (1990), "Deformation of rock foundations under dams", Proceedings of the 10th Annual USCOLD Lecture Series, New Orleans, Louisiana, U.S.A.
  34. Serafim, J.L. (1964), Rock Mechanics Considerations in the Design of Concrete Dams, in State of Stress in the Earth's Crust, 611-650, New York, U.S.A.
  35. Serafim, J.L. and Guerreiro, M. (1968), "Shear strength of rock masses at 3 Spanish dam sites", Proceedings of the International Symposium on Rock Mechanics, Madrid, Spain.
  36. Serafim, J.L. and Pereira, J.P. (1983), "Consideration of the geomechanics classification of Bieniawski", Proceedings of the International Symposium on Engineering Geology and Underground Constructions, Lisbon, Portugal.
  37. Shannon and Wilson Inc. (1964), "Report on in situ rock tests, Dworshak dam site", US Army Engineer District, Walla Walla, Seattle, Washington, U.S.A.
  38. Shen, X., Niu, X., Lu, W., Chen, M., Yan, P., Wang, G. and Leng, Z. (2017), "Rock mass utilization for the foundation surfaces of high arch dams in medium or high geo-stress regions: review", B. Eng. Geol. Environ., 76, 795-813. https://doi.org/10.1007/s10064-016-0892-4.
  39. Stucky Consulting Engineers Ltd. (1999), "Deriner dam and HEPP, Additional Geological Investigations", Synthesis Report, Report No. 4353/4115-1, Switzerland.
  40. Stucky Consulting Engineers Ltd. (2000), "Deriner dam and HEPP, Dynamic analysis of the final optimised dam desig"n, Report No. 4353/4265, Switzerland.
  41. Tan, C., Ma, D.H., Liu, Z.F., Gao, Y., Xu, X.C. and Zhang, W. (2020), "Research on the deformation and failure pattern of rock masses in dam foundations controlled by continuous gently inclined and discontinuous steeply inclined unconformities", IOP Conf. Ser. Earth Environ. Sci., 570, 1-12.
  42. Tanchev, L. (2014), Dams and Appurtenant Hydraulic Structures, Taylor & Francis Group.
  43. Tayarani, N.S., Jamali, S. and Zahed, M.M. (2020), "Combination of artificial neural networks and numerical modeling for predicting deformation modulus of rock masses", Arch. Min. Sci. 65(2), 337-346.
  44. Unal, B. (2007), "Deriner dam and HEPP grout curtain test results", Proceedings of the Turkey Union of Chambers of Architects and Engineers Second Geotechnical Symposium, Adana, Turkey, November.
  45. Wallace, G.B., Slebir, E.J. and Anderson, F.A. (1970), In situ methods for determining deformation modulus used by the bureau of reclamation, ASTM Special Technical Publication, 477, 3-26, Philadelphia, USA.
  46. Wei, Y., Xu, M., Wang, W., Shi, A., Tang, M. and Ye, Z. (2011), "Feasibility of columnar jointed basalt used for high-arch dam foundation", J. Rock Mech. Geotech. Eng., 3, 461-468. https://doi.org/10.3724/SP.J.1235.2011.00461
  47. Wu, B, Niu, J, Su, H, Yang, M, Wu, Z and Cui, X. (2019), "An approach for deformation modulus mechanism of super-high arch dams", Struct. Eng. Mech., 69(5), 557-566. http://doi.org/10.12989/sem.2019.69.5.557.
  48. Zhang, Y, Ding, X, Huang, S, Qin, Y, Li, P and Li, Y. (2018), "Field measurement and numerical simulation of excavation damaged zone in a 2000 m-deep cavern", Geomech. Eng., 16(4), 399-413. http://doi.org/10.12989/gae.2018.16.4.399.