References
- Abdollahzadeh, G. and Abbasi, M. (2015), "Response modification factor of suspended zipper braced frames", Steel Compos. Struct., 18(1), 165-185. https://doi.org/10.12989/scs.2015.18.1.165.
- Abou-Elfath, H., Fahmy, A.S. and Khalifa, K.M. (2018), "Response modification factors of buckling-restrained braced frames designed according to the Egyptian code", Alex. Eng. J., 57(4), 2851-2864. https://doi.org/10.1016/j.aej.2018.07.001.
- Aliakbari, F. and Shariatmadar, H. (2019), "Seismic response modification factor for steel slit panel-frames", Eng. Struct., 181, 427-436. https://doi.org/10.1016/j.engstruct.2018.12.027.
- Applied Technology Council, & United States. Federal Emergency Management Agency (2009), Quantification of Building Seismic Performance Factors, US Department of Homeland Security, FEMA.
- ASCE 7 (2016), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE 7-16, American Society of Civil Engineers, Virginia.
- Asteris, P.G., Repapis, C.C., Foskolos, F., Fotos, A. and Tsaris, A.K. (2017), "Fundamental period of infilled RC frame structures with vertical irregularity", Struct. Eng. Mech., 61(5), 663-674. https://doi.org/10.12989/sem.2017.61.5.663.
- ATC-40 (1997), Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, California Seismic Safety Commission.
- Avanaki, M.J. (2019), "Response modification factors for seismic design of steel Fiber Reinforced Concrete segmental tunnels", Constr. Build. Mater., 211, 1042-1049. https://doi.org/10.1016/j.conbuildmat.2019.03.275.
- BHRC (2015), Iranian Code of Practice for Seismic Resistant Design of Buildings: Standard No. 2800, 4th Edition, Building and Housing Research Center.
- Borzi, B. and Elnashai, A.S. (2000), "Refined force reduction factors for seismic design", Eng. Struct., 22(10), 1244-1260. https://doi.org/10.1016/S0141-0296(99)00075-9.
- Bosco, M., Ferrara, G.A., Ghersi, A., Marino, E.M. and Rossi, P.P. (2015), "Seismic assessment of existing RC framed structures with in-plan irregularity by nonlinear static methods", Earthq. Struct., 8(2), 401-422. https://doi.org/10.12989/eas.2015.8.2.401.
- Castiglioni, C.A. and Zambrano, A. (2010), "Determination of the behaviour factor of steel moment-resisting (MR) frames by a damage accumulation approach", J. Constr. Steel Res., 66(5), 723-735. https://doi.org/10.1016/j.jcsr.2009.11.002.
- Chrysanthopoulos, M.K., Dymiotis, C. and Kappos, A.J. (2000), "Probabilistic evaluation of behaviour factors in EC8-designed R/C frames", Eng. Struct., 22(8), 1028-1041. https://doi.org/10.1016/S0141-0296(99)00026-7.
- Code, P. (2005), Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels.
- Fam, M.G. (2014), "Determination of behaviour factor for reinforced concrete moment resisting frames irregular in height", M.Sc Thises, University of Kurdistan, Sanandaj, Iran.
- Federal Emergency Management Agency, (1997), NEHRP Guideline for the Seismic Rehabilitation of Buildings, FEMA-273, Washington, DC.
- Federal Emergency Management Agency. (2005), Improvement of Nonlinear Static Seismic Analysis Procedures, FEMA 440, Applied Technology Council (ATC-55 Project).
- Gattesco, N. and Boem, I. (2015), "Seismic performances and behavior factor of post-and-beam timber buildings braced with nailed shear walls", Eng. Struct., 100, 674-685. https://doi.org/10.1016/j.engstruct.2015.06.057.
- Gerami, M., Mashayekhi, A.H. and Siahpolo, N. (2017), "Computation of R factor for steel moment frames by using conventional and adaptive pushover methods", Arab. J. Sci. Eng., 42(3), 1025-1037. https://doi.org/10.1007/s13369-016-2257-5.
- Gomez-Martinez, F., Alonso-Dura, A., De Luca, F. and Verderame, G.M. (2016), "Seismic performances and behaviour factor of wide-beam and deep-beam RC frames", Eng. Struct., 125, 107-123. https://doi.org/10.1016/j.engstruct.2016.06.034.
- Habibi, A. and Moharrami, H. (2010), "Nonlinear sensitivity analysis of reinforced concrete frames", Finite Elem. Anal. Des., 46(7), 571-584. https://doi.org/10.1016/j.finel.2010.02.005.
- Hatzigeorgiou, G.D. (2010), "Behavior factors for nonlinear structures subjected to multiple near-fault earthquakes", Comput. Struct., 88(5-6), 309-321. https://doi.org/10.1016/j.compstruc.2009.11.006.
- Hwang, H.H. and Jaw, J.W. (1989), "Statistical evaluation of response modification factors for reinforced concrete structures", National Center for Earthquake Engineering Research, Buffalo, New York.
- Izadinia, M., Rahgozar, M.A. and Mohammadrezaei, O. (2012), "Response modification factor for steel moment-resisting frames by different pushover analysis methods", J. Constr. Steel Res., 79, 83-90. https://doi.org/10.1016/j.jcsr.2012.07.010.
- Kappos, A.J. (1999), "Evaluation of behavior factors on the basis of ductility and overstrength studies", Eng. Struct., 21(9), 823-835. https://doi.org/10.1016/S0141-0296(98)00050-9.
- Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2008), "Seismic response of plane steel MRF with setbacks: estimation of inelastic deformation demands", J. Constr. Steel Res., 64(6), 644-654. https://doi.org/10.1016/j.jcsr.2007.12.002.
- Kheyroddin, A. and Mashhadiali, N. (2018), "Response modification factor of concentrically braced frames with hexagonal pattern of braces", J. Constr. Steel Res., 148, 658-668. https://doi.org/10.1016/j.jcsr.2018.06.024.
- Kim, J. and Choi, H. (2005), "Response modification factors of chevron-braced frames", Eng. Struct., 27(2), 285-300. https://doi.org/10.1016/j.engstruct.2004.10.009.
- Kim, J., Park, J. and Kim, S.D. (2009), "Seismic behavior factors of buckling-restrained braced frames", Struct. Eng. Mech., 33(3), 261-284. https://doi.org/10.12989/sem.2009.33.3.261.
- Landi, L., Pollioa, B. and Diotallevi, P.P. (2014), "Effectiveness of different standard and advanced pushover procedures for regular and irregular RC frames", Struct. Eng. Mech., 51(3), 433-446. https://doi.org/10.12989/sem.2014.51.3.433.
- Lee, J. and Kim, J. (2015), "Seismic response modification factors of reinforced concrete staggered wall structures", Mag. Concrete Res., 67(20), 1070-1083. https://doi.org/10.1680/macr.14.00036.
- Maheri, M.R. and Akbari, R. (2003), "Seismic behaviour factor, R, for steel X-braced and knee-braced RC buildings", Eng. Struct., 25(12), 1505-1513. https://doi.org/10.1016/S0141-0296(03)00117-2.
- Mohammadi, R., Massumi, A. and Meshkat-Dini, A. (2015), "Structural reliability index versus behavior factor in RC frames with equal lateral resistance", Earthq. Struct., 8(5), 995-1016. https://doi.org/10.12989/eas.2015.8.5.995.
- Nezhad, M.E. and Poursha, M. (2015), "Seismic evaluation of vertically irregular building frames with stiffness, strength, combined-stiffness-and-strength and mass irregularities", Earthq. Struct., 9(2), 353-373. https://doi.org/10.12989/eas.2015.9.2.353.
- Omidian, P. and Saffari, H. (2018), "Comparative analysis of seismic behavior of RC buildings with Shape Memory Alloy rebar in regular, torsional irregularity and extreme torsional irregularity cases", J. Build. Eng., 20, 723-735. https://doi.org/10.1016/j.jobe.2018.09.020.
- Reinhorn, A.M. et al. (2009), "IDARC 2D version 7.0: A program for the inelastic damage analysis of structures", MCEER Technical Rep. MCEER-09-0006, Univ. at Buffalo-State Univ. of New York, Buffalo, NY.
- Salimbahrami, S.R. and Gholhaki, M. (2019), "Effects of higher Modes and Degrees of Freedom (DOF) on strength reduction factor in reinforced concrete frames equipped with steel plate shear wall", Struct., 19, 234-247. https://doi.org/10.1016/j.istruc.2019.01.015.
- Yavarian, S. and Ahmad, R. (2016), "Evaluation of seismic performance factors in high rise steel buildings with dual lateral systems consisting of buckling restrained braced frames and intermediate moment frames", Procedia Eng., 161, 680-686. https://doi.org/10.1016/j.proeng.2016.08.736.
- Zerbin, M., Aprile, A., Beyer, K. and Spacone, E. (2019), "Ductility reduction factor formulations for seismic design of RC wall and frame structures", Eng. Struct., 178, 102-115. https://doi.org/10.1016/j.engstruct.2018.10.020.