대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제37권10호
  • /
  • Pages.227-234
  • /
  • 2021
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

화재에 노출된 강폴리머 조립식 바닥의 원형 스페이서 차열 설계

Insulation Design for Circular Spacers of Steel-Polymer Prefabricated Floor under Fire

  • 박민재 (고려대 건축사회환경공학부) ;
  • 민정기 (한국건설생활환경시험연구원 실화재센터)
  • 투고 : 2021.07.18
  • 심사 : 2021.08.27
  • 발행 : 2021.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

Steel-Polymer prefabricated floor system that contained infilled polymers between the shallow top and bottom steel plates was developed to apply to steel structures. The thickness of the floor system mainly has a range from 25 mm to 70 mm. Despite the shallow thickness, the floor system has great structural performance, such as bending capacity, floor vibration performance. However, the fire resistance performance of the system needed to be improved to apply to actual buildings without fire-proofing materials. With the development of the polymers adding an additive, the fire resistance performance of the system was significantly improved, and studies about the structural fire behavior of the floor system were actively conducted with experimental and numerical approaches. Nevertheless, the behavior of circular spacers that had a role in enhancing out-of-plane buckling loads and ductility under large deformations and taking advantage in the manufacturing process has not been investigated. Therefore, the thermal behavior of circular spacers under fire conditions was studied with simplified numerical methods. And, with transient heat transfer analysis including nonlinear thermal properties of steel and polymers, nonlinear thermal contact conductance of the contact area between steel and polymers, the temperature changes of unheated surfaces where the spacers were installed at or not were obtained under fire conditions. Finally, the relation equation was proposed to calculate the temperature changes according to various specifications of circular spacers. Using this proposed equation, the thermal insulation design for the spacers of steel-polymer prefabricated were carried out at the end of this paper.

키워드

과제정보

이 연구는 한국연구재단 중견연구자지원 사업의 연구비 지원에 의한 결과의 일부임. 과제번호:NRF-2020R1A2C3005687

참고문헌

  1. Agwu Nnanna, A. G., & Haji-Sheikh, A. (2005). Sensitivity coefficients for experimental estimation of interstitial properties during phase change in porous medis, Inverse Problems in Science and Engineering, 13(6), 595-616. https://doi.org/10.1080/17415970500147688
  2. Albero, V., Espinos, A., Serra, E., Romero, M. L., & Hospitaler, A. (2019). Numerical study on the flexural behaviour of slim-floor beams with hollow core slabs at elevated temperature, Engineering Structures, 180, 561-573. https://doi.org/10.1016/j.engstruct.2018.11.061
  3. Bahrami, M., Yovanovich, M., & Marotta, E. (2004). Modeling of thermal joint resistance of polymer-metal rough interfaces, In Proceedings of the 2004 ASME International Mechanical Engineering Congress, USA
  4. European Committee for Standardization (2005). EN 1993-1-2:2005 Eurocode 3: Design of steel structures-Part 1-2: General rules-Structural fire design
  5. Fang, H., Bai, Y., Liu, W., & Wang, J. (2019). Connections and structural applications of fibre reinforced polymer composites for civil infrastructure in aggressive environments, Composites Part B: Engineering, 164, 129-143. https://doi.org/10.1016/j.compositesb.2018.11.047
  6. Fellinger, J. H. H., & Twilt, L. (1996). Fire resistance of slim floor beams, In Proceedings Composite Construction, Germany
  7. Fuller, J. J., & Marotta, E. (2001). Thermal contact conductance of metal/polymer joints: An analytical and experimental investigation, Journal of Thermophysics and Heat Transfer, 15(2), 228-238. https://doi.org/10.2514/2.6598
  8. Gibbns, J. (2006). Thermal Contact Resistance of Polymer Interfaces, Master's Thesis, University of Waterloo.
  9. Hollaway, L. C. (2010). A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties, Construction and Building Materials, 24(14), 2418-2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062
  10. Korean Agency for Technology and Standards (2019a). KS F 2257-1 Methods of Fire Resistance Test for Elements of Building Construction - General Requirements
  11. Korean Agency for Technology and Standards (2019b). KS F 2257-5 Methods of Fire Resistance Test for Elements of Building Construction - Specific Requirements for Loadbearing Horizontal Separating Elements
  12. Lee, J. H., Park, M. J., & Yoon, S. W. (2020). Floor vibration experiment and serviceability test of iFLASH System, Materials, 13(24), 5760. https://doi.org/10.3390/ma13245760
  13. Park, M. J. (2020). Structural Fire Behavior of Steel-Polymer Hybrid Floor for Disaster Prevention, Ph.D Dissertation, Korea University.
  14. Park, M. J., Bae, J., Ryu, J., & Ju, Y. K. (2020a). Fire resistance of hybrid floor based on small-scale furnace tests and energy-based time equivalent approach, International Journal of Steel Structures, 20(6), 1811-1821. https://doi.org/10.1007/s13296-020-00353-1
  15. Park, M. J., Min, J. K., Bae, J., & Ju, Y. K. (2020b). Thermal contact conductance-based thermal behavior analytical model for a hybrid floor at elevated temperatures, Materials, 13(19), 4257. https://doi.org/10.3390/ma13194257
  16. Park, M. J., Bae, J., Ryu, J., & Ju, Y. K. (2020c). Fire design equation for steel-polymer composite floors in thermal fields via finite element analysis, Materials, 13(23), 5573. https://doi.org/10.3390/ma13235573
  17. Ryu, J., Kim, Y. Y., Park, M. W., Yoon, S., Lee, C., & Ju, Y. K. (2018). Experimental and numerical investigations of steel-polymer hybrid floor panels subjected to three-point bending, Engineering Structures, 175, 467-482. https://doi.org/10.1016/j.engstruct.2018.08.030
  18. Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2003). Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art reivew, Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156(1), 51-62. https://doi.org/10.1680/stbu.2003.156.1.51
  19. Zhao, X., & Zhang, L. (2007). State-of-the-art review on FRP strengthened steel structures, Engineering Structures, 29(8), 1808-1823. https://doi.org/10.1016/j.engstruct.2006.10.006