Advances in materials Research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Effect of crushed waste glass as partial replacement of natural fine aggregate on performance of high strength cement concrete

  • Ajmal, Paktiawal (Department of Civil Engineering, Jamia Millia Islamia) ;
  • Mehtab, Alam (Department of Civil Engineering, Jamia Millia Islamia)
  • Received : 2020.06.09
  • Accepted : 2022.01.18
  • Published : 2022.12.25
⟨ Previous Next ⟩

Abstract

Disposal of industrial waste in cities where municipal authorities permitting higher floor area ratio coupled with increasing living standards, a lot of demolition waste is being generated. Its disposal is a challenge particularly in megacities where no landfills are available. The ever-increasing cost of building construction materials also necessitates consuming demolition wastes in a useful manner to save fresh natural raw materials. In the present work, the crushed waste glass is used in high-strength concrete as a partial replacement of fine aggregate. The control concrete of grade M60 was proportioned following BIS 10262-2009. The crushed waste glass has been used as a partial replacement with varying percentages of 10, 20, 30, and 40% by weight of fine aggregate. Experimental tests were carried on the fresh and hardened state of the concrete. The effect of crushed waste glass on the workability of the concrete has been investigated. Non-destructive tests, acid attack tests, compressive strength, split tensile strength, and X-ray diffraction analysis was carried out for the control concrete and concrete containing crushed waste glass after 7, 28, and 270 days of normal curing. The results show that for the same w/c ratio, the workability of concrete increases with increasing replaced crushed waste glass content. However, the decrease in compressive strength of the concrete after 28 days of normal curing and further after 28 days of acid attacks, up to 30% replacement level of fine aggregate by the crushed waste glass is insignificant.

Keywords

Acknowledgement

The authors acknowledge the central university of Jamia Millia Islamia, Jamia Nagar, New Delhi for providing the laboratory testing equipment.

References

  1. Abdullah, S. and Fan, M. (2014), "Characteristic of concrete with waste glass as fine aggregate replacement", Int. J. Eng. Tech Res., 6, 11-17.
  2. Aliabdo, A.A., Elmoaty, A. and Aboshama, A.Y. (2016), "Utilization of waste glass powder in the production of cement and concrete", Constr. Build. Mater., 124, 866-877. http://doi.org/10.1016/j.conbuildmat.2016.08.016.
  3. Almesfer, N. and Ingham, J. (2014), "Effect of waste glass on the properties of concrete", J. Mater. Civil Eng., 26(11), 1-6. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001077
  4. BIS 383 (2002), Specification for Coarse and Fine Aggregate from Natural Sources for Concrete, Bureau of Indian Standards.
  5. BIS 456 (2000), Plain and Reinforced Concrete Code of Practice, Bureau of Indian Standards.
  6. BIS 516 (2018), Method of Test for Strength of Concrete, Bureau of Indian Standards.
  7. BIS 650 (1999), Standard Sand for Testing Cement Specification, Bureau of Indian Standards.
  8. BIS 1199 (2004), "Method of Sampling and Analysis of Concrete, Bureau of Indian Standards.
  9. BIS 2386 Part 3 (2002), Method of Test for Aggregate for Concrete, Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standards.
  10. BIS 4031 Part 1 (2005), Method of Physical Test for Determination of Fineness by Wet Sieving, Bureau of Indian Standards.
  11. BIS 4031 Part 4 (1995), Method of Physical Test for Determination of Consistency of Standard Cement Paste, Bureau of Indian Standards.
  12. BIS 4031 Part 5 (2000), Method of Physical Test for Determination of Initial and Final Setting Times, Bureau of Indian Standards.
  13. BIS 4031 Part 6 (2000), Method of Physical Test for Determination of Compressive Strength of Cement, Bureau of Indian Standards.
  14. BIS 5816 (2013), Method of Test for Splitting Tensile Strength of Concrete, Bureau of Indian Standards.
  15. BIS 8112 (2013), Ordinary Portland Cement, 43 Grade Specification, Bureau of Indian Standards.
  16. BIS 9103 (2004), Specification of Concrete Admixture, Bureau of Indian Standards.
  17. BIS 10086 (2013), Specification for Moulds for Use in Test of Cement and Concrete, Bureau of Indian Standards.
  18. BIS 10262 (2009), Concrete mix proportioning-Guidelines, Bureau of Indian Standards.
  19. BIS 13311 Part 1 (2013), Non-destructive Testing of Concrete, Ultrasonic pulse velocity, Bureau of Indian Standards.
  20. BIS 13311 Part 2 (2004), Non-destructive Testing of Concrete, Rebound hammer, Bureau of Indian Standards.
  21. Bisht, K. and Ramana, P.V. (2018), "Sustainable production of concrete containing discarded beverage glass as fine aggregate", Constr. Build. Mater., 177, 116-124. https://doi.org/10.1016/j.conbuildmat.2018.05.119.
  22. Bisht, K., Kabeer, K.I. and Ramana, P.V. (2020), "Gainful utilization of waste glass for production of sulphuric acid resistance concrete", Constr. Build. Mater., 235, 1-15. https://doi.org/10.1016/j.conbuildmat.2019.117486.
  23. Care Ratings Professional Risk Opinion (2018), "Glass Industry - FY19 update"
  24. Degirmencia, N., Yilmazb, A. and Cakir, O. (2011), "Utilization of waste glass as sand replacement in cement mortar", Indian J. Eng. Mater. Sci., 18, 303-308.
  25. Du, H. and Tan, K.H. (2014), "Concrete with recycled glass as fine aggregate", ACI Mater. J., 111(1), 47-57.
  26. Gerges, N.N., Issa, C.A., Fawaz, S.A., Jabbour, J., Jreige, J. and Yacoub, A. (2018), "Recycled glass concrete as partial replacement of fine and coarse aggregate", Eur. J. Eng. Res. Sci., 1-9. http://doi.org/10.24018/ejers.2018.3.1.533.
  27. India Brand Equity Foundation (2019), "Glass and Ceramics market and opportunity", https://www.academia.edu/5265330/Glass_and_Ceramics_MARKET_and_OPPORTUNITIES
  28. JRC (2010), "Best Available Techniques (BAT) Reference Document for the Manufacture of Glass", European Commission Joint Research Centre Institute for Prospective Technological Studies, Luxembourg.
  29. Khan, M.N.N., Saha, A.K. and Sarker, P.K. (2021), "Evaluation of the ASR of waste glass fine aggregate in alkali activated concrete by concrete prism tests", Constr. Build. Mater., 266, 1-15. https://doi.org/10.1016/j.conbuildmat.2020.121121.
  30. Kim, S., Choi, S.Y. and Yang, E.I. (2018), "Evaluation of durability of concrete substituted heavyweight waste glass as fine aggregate", Constr. Build Mater., 184, 269-277. https://doi.org/10.1016/j.conbuildmat.2018.06.221.
  31. Kou, S.C. and Poon, C.S. (2009), "Properties of self-compacting concrete prepared with recycled glass aggregate", Cement Concrete Compos., 31, 107-113. https://doi.org/10.1016/j.cemconcomp.2008.12.002.
  32. Lu, J.X., Zheng, H., Yang, S., He, P. and Poon, C.S. (2019), "Co-utilization of waste glass cullet and glass powder in precast concrete products", Constr. Build. Mater., 223, 210-220. https://doi.org/10.1016/j.conbuildmat.2019.06.231.
  33. Malek, M., Lasica, W., Jackowski, M. and Kadela, M. (2020), "Effect of waste glass addition as a replacement for fine aggregate on properties of mortar", Mater., 13, 1-19. https://doi.org/10.3390/ma13143189.
  34. Malik, M.I., Bashir, M., Ahmad, S., Tariq, T. and Chowdhary, U. (2013), "Study of concrete involving use of waste glass as partial replacement of fine aggregate", IOSR J. Eng., 7, 08-13. https://doi.org/10.9790/3021-03760813.
  35. Meddah, M.S. (2019), "Use of waste window glass as substitute of natural sand in concrete production", IOP Conf. Ser.: Mater. Sci. Eng., 603, 1-10. https://doi.org/10.1088/1757-899X/603/3/032011.
  36. Mosaberpanah, M.A., Eren, O. and Tarassoly, A.R. (2018), "The effect of nano-silica and waste glass powder on mechanical, rheological, and shrinkage properties of UHPC using response surface methodology", J. Mater. Res. Technol., 8(1), 804-811. https://doi.org/10.1016/j.jmrt.2018.06.011.
  37. Neville, A.M. (2012), Properties of Concrete, (Fourth Edition), Pearson Education, Inc. and Dorling Kindersley Publishing Inc.
  38. Park, S.B., Lee, B.C. and Kim, J.H. (2004), "Studies on mechanical properties of concrete containing waste glass aggregate", Cement Concrete Res., 34, 2181-2189. https://doi.org/10.1016/j.cemconres.2004.02.006.
  39. Rahma, A., Naber, N.E. and Ismail, S.I. (2017), "Effect of glass powder on the compression strength and the workability of concrete", Cogent Eng., 4(1), 1373415. https://doi.org/10.1080/23311916.2017.1373415.
  40. Sharifi, Y., Houshiar, M. and Aghebati, B. (2013), "Recycled glass replacement as fine aggregate in selfcompacting concrete", Front. Struct. Civil Eng., 7, 419-428. https://doi.org/10.1007/s11709-013-0224-8.
  41. Shayan, A. and Xu, A. (2004), "Value-added utilisation of waste glass in concrete", Cement Concrete Res., 34(1), 81-89. https://doi.org/10.1016/S0008-8846(03)00251-5.
  42. Sobolev, K., Turker, P., Soboleva, S. and Iscioglu, G. (2007), "Utilization of waste glass in ECO-cement: Strength properties and microstructural observations", Waste Manage., 27, 971-976. https://doi.org/10.1016/j.wasman.2006.07.014.
  43. Steyn, Z., Babafemi, A.J., Fataar, H. and Combrinck, R. (2020), "Concrete containing waste recycled glass, plastic and rubber as sand replacement", Constr. Build. Mater., 269, 121242. https://doi.org/10.1016/j.conbuildmat.2020.121242.
  44. Topcu, I.B. and Canbaz, M. (2004), "Properties of concrete containing waste glass", Cement Concrete Res., 34, 267-274. https://doi.org/10.1016/j.cemconres.2003.07.003.
  45. Walczaka, P., Malolepszy, J., Rebenb, M., Szymanski, P. and Rzepa, K. (2015), "Utilization of waste glass in autoclaved aerated concrete", Procedia Eng., 122, 302-309. https://doi.org/10.1016/j.proeng.2015.10.040.
  46. Wang, H.Y. (2009), "A study of the effects of LCD glass sand on the properties of concrete", Waste Manage., 29, 335-341. https://doi.org/10.1016/j.wasman.2008.03.005.
  47. Wang, C.C. and Wang, H.Y. (2017), "Assessment of the compressive strength of recycled waste LCD glass concrete using the ultrasonic pulse velocity", Constr. Build. Mater., 137, 345-353. https://doi.org/10.1016/j.conbuildmat.2017.01.117.
  48. Yang, S., Lu, X. and Poon, C.S. (2020), "Recycling of waste glass in dry-mixed concrete blocks: Evaluation of alkali-silica reaction (ASR) by accelerated laboratory tests and long-term field monitoring", Constr. Build. Mater., 262, 1-13. https://doi.org/10.1016/j.conbuildmat.2020.120865.
  49. Yung, H., Zeng, H.H. and Wu, J.Y. (2014), "A study on the macro and micro properties of concrete with LCD glass", Constr. Build. Mater., 50, 664-670. https://doi.org/10.1016/j.conbuildmat.2013.09.015.
  50. Zidol, A., Tognonvi, M.T. and Hamou, A.T. (2017), "Effect of glass powder on concrete sustainability", New J. Glass Ceram., 7, 34-47. https://doi.org/10.4236/njgc.2017.72004.