DOI QR코드

DOI QR Code

Behavior of F shape non-persistent joint under experimental and numerical uniaxial compression test

  • Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology) ;
  • Asgari, Kaveh (Department of Mining Engineering, Hamedan University of Technology) ;
  • Zarei, Meisam (Department of Mining Engineering, Hamedan University of Technology) ;
  • Ghalam, Erfan Zarrin (Department of Mining Engineering, Hamedan University of Technology)
  • Received : 2021.05.18
  • Accepted : 2022.02.25
  • Published : 2022.02.25

Abstract

Experimental and discrete element approaches were used to examine the effects of F shape non-persistent joints on the failure behaviour of concrete under uniaxial compressive test. concrete specimens with dimensions of 200 cm×200 cm×50 cm were provided. Within the specimen, F shape non-persistent joint consisting three joints were provided. The large joint length was 6 cm, and the length of two small joints were 2 cm. Vertical distance between two small joints change from 1.5 cm to 4.5 cm with increment of 1.5 cm. In constant joint lengths, the angle of large joint change from 0° to 90° with increments of 30°. Totally 12 different models were tested under compression test. The axial load rate on the model was 0.05 mm/min. Concurrent with experimental tests, numerical simulation (Particle flow code in two dimension) were performed on the models containing F shape non-persistent joint. Distance between small joints and joint angles were similar to experimental one. the results indicated that the failure process was mostly governed by both of the Distance between small joints and joint angles. The axial loading rate on the model was 0.05 mm/min. The compressive strengths of the samples were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. In the first, there were only a few acoustic emission (AE) hits in the initial stage of loading, and then AE hits rapidly grow before the applied stress reached its peak. Furthermore, a large number of AE hits accompanied every stress drop. Finally, the failure pattern and failure strength are similar in both approaches i.e., the experimental testing and the numerical simulation approaches.

Keywords

References

  1. Ashby, M.F.A. and Hallam, S.D. (1986), "The failure of brittle solids containing small cracks under compressive stress states", Acta Metall Sin, 34(3), 497-510. https://doi.org/10.1016/0001-6160(86)90086-6.
  2. Bagher Shemirani, A., Amini, M.S. and Sarfarazi, V. (2021), "Experimental and numerical investigation of the effect of bridge area and its angularities on the failure mechanism of non-persistent crack in concrete-like materials", Smart Struct. Syst., 27(3), 54-67. https://doi.org/10.12989/sss.2021.27.3.479.
  3. Ban, L., Du, W., Jin, T., Qi, C. and Li, X. (2021), "A roughness parameter considering joint material properties and peak shear strength model for rock joints", Int. J. Min. Sci. Tech., 31(3), 413-420. https://doi.org/10.1016/j.ijmst.2021.03.007.
  4. Barenblatt, G.I. (1962), "The mathematical theory of equilibrium of cracks in brittle fracture", Adv. Appl. Mech., 7, 55-129. https://doi.org/10.1016/S0065-2156(08)70121-2.
  5. Baud, P., Reuschle, T. and Charlez, P. (1996), "An improved wing crack model for the deformation and failure of rock in compression", Int. J. Rock Mech. Min. Sci., 33(5), 539-542. https://doi.org/10.1016/0148-9062(96)00004-6.
  6. Bobet, A. and Einstein, H.H. (1998a), "Numerical modeling of fracture coalescence in a model rock material", Int. J. Fract., 92, 221-252. https://doi.org/10.1023/A:1007460316400.
  7. Bobet, A. and Einstein, H.H. (1998b), "Fracture coalescence in rock-type materials under uniaxial and biaxial compression", Int. J. Rock Mech. Min. Sci., 35(7), 863-888. https://doi.org/10.1016/S0148-9062(98)00005-9.
  8. Cao, R., Yao, R., Meng, J., Lin, Q., Lin, H. and Li, S. (2020), "Failure mechanism of non-persistent jointed rock-like specimens under uniaxial loading: laboratory testing", Int. J. Rock Mech. Min. Sci., 132, 104341. https://doi.org/10.1016/j.ijrmms.2020.104341.
  9. Cheng, X. (2019), "Damage and failure characteristics of rock similar materials with pre-existing cracks", Int. J. Coal Sci. Tech., 6(4), 505-517. https://doi.org/10.1007/s40789-019-0263-4.
  10. Dugdale, D.S. (1960), "Yielding of steel sheets containing slits", J. Mech. Phys. Solid., 8, 100-1041. https://doi.org/10.1016/0022-5096(60)90013-2.
  11. Ghazvinian, A., Sarfarazi, V., Schubert, W. and Blumel, M. (2012), "A study of the failure mechanism of planar nonpersistent open joints using PFC2D", Rock Mech. Rock Eng., 45(5), 677-693. https://doi.org/10.1007/s00603-012-0233-2.
  12. Gonc,laves da Silva, B. and Einstein, H.H. (2013), "Modeling of crack initiation, propagation and coalescence in rocks", Int. J. Fract., 182, 167-186. https://doi.org/10.1007/s10704-013-9866-8.
  13. Griffith, A.A. (1920), "The phenomenon of rupture and flow in solids", Philos. Transac. Royal Soc., 221, 163-198. https://doi.org/10.1098/rsta.1921.0006.
  14. Haeri, H. and Sarfarazi, V. (2019), "Experimental and numerical studies of the pre-existing cracks and pores interaction in concrete specimens under compression", Smart Struct. Syst., 23(5), 47-59. https://doi.org/10.12989/sss.2019.23.5.479.
  15. Hillerborg, A., Modeer, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6, 773-782. https://doi.org/10.1016/0008-8846(76)90007-7.
  16. Hoek, E. and Bieniawski, Z.T. (1965), "Brittle fracture propagation in rock under compression", J. Fract. Mech., 1(3), 139-155. https://doi.org/10.1007/BF00186851.
  17. Horri, H. and Nemat-Naseer, S. (1985), "Compression-induced microcrack growth in brittle soilds: Axial splitting and shear failure", J. Geophys. Res., 90(B4), 3105-3125. https://doi.org/10.1029/JB090iB04p03105.
  18. Hu, J., Wen, G., Lin, Q., Cao, P. and Li, S. (2020), "Mechanical properties and crack evolution of double-layer composite rocklike specimens with two parallel fissures under uniaxial compression", Theo. Appl. Fract. Mech., 108, 102610. https://doi.org/10.1016/j.tafmec.2020.102610.
  19. Huang, C.H., Yang, W., Duan, K., Fang, L., Wang, L. and Bo, C.H. (2019), "Mechanical behaviors of the brittle rock-like specimens with multi-non-persistent joints under uniaxial compression", Constr. Build. Mater., 220, 426-443. https://doi.org/10.1016/j.conbuildmat.2019.05.159.
  20. Kou, M., Liu, X., Tang, S. and Wang, Y. (2019), "3-D X-ray computed tomography on failure characteristics of rock-like materials under coupled hydro-mechanical loading", Theor. Appl. Fract. Mech., 104, 102396. https://doi.org/10.1016/j.tafmec.2019.102396.
  21. Lee, H. and Jeon, S. (2011), "An experimental and numerical study of fracture coalescence in pre cracked specimens under uniaxial compression", Int. J. Solid. Struct., 48(6), 979-999. https://doi.org/10.1016/j.ijsolstr.2010.12.001.
  22. Lin, Q. and Cao, P. (2020), "Fatigue behaviour and constitutive model of yellow sandstone containing pre-existing surface crack under uniaxial cyclic loading", Theo. Appl. Fract. Mech., 109(2), 66-78. https://doi.org/10.1016/j.tafmec.2020.102776.
  23. Lin, Q. and Cao, P. (2020), "Mechanical behavior around double circular openings in a jointed rock mass under uniaxial compression", Arch. Civil Mech. Eng., 20(1), 69-79. https://doi.org/10.1007/s43452-020-00027-z.
  24. Lin, Q. and Cao, P. (2021), "Crack coalescence in rock-like specimens with two dissimilar layers and pre-existing double parallel joints under uniaxial compression", Int. J. Rock Mech. Min. Sci., 139(2), 66-78. https://doi.org/10.1016/j.ijrmms.2021.104621.
  25. Lin, Q., Cao, P., Cao, R., Lin, H. and Meng, J. (2020), "Mechanical behavior around double circular openings in a jointed rock mass under uniaxial compression", Arch. Civil Mech. Eng., 20(1), 19. https://doi.org/10.1007/s43452-020-00027-z.
  26. Lin, Q., Cao, P., Meng, J., Cao, R. and Zhao, Z. (2020), "Strength and failure characteristics of jointed rock mass with double circular holes under uniaxial compression: Insights from discrete element method modelling", Theo. Appl. Fract. Mech., 109, 102692. https://doi.org/10.1016/j.tafmec.2020.102692.
  27. Lisjak, A., Figi, D. and Grasselli, G. (2014), "Fracture development around deep underground excavations: Insights from FDEM modelling", J. Rock Mech. Geotech. Eng., 6, 493-505. https://doi.org/10.1016/j.jrmge.2014.09.003.
  28. Luo, X., Cao, P. and Lin, Q. (2021), "Mechanical behaviour of fracture-filled rock-like specimens under compression-shear loads: An experimental and numerical study", Theo. Appl. Fract. Mech., 113(3), 123-134. https://doi.org/10.1016/j.tafmec.2021.102935.
  29. Mahabadi, O.K., Lisjak, A., Grasselli, G. and Munjiza, A. (2012), "Y-Geo: A new combined finite-discrete element numerical code for geomechanical applications", Int. J. Geomech., 12(6), 676-688. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000216.
  30. Miao, S., Pan, P.Z., Wu, Z., Li, S. and Zhao, S. (2018), "Fracture analysis of sandstone with a single filled flaw under uniaxial compression", Eng. Fract. Mech., 204, 319-343. https://doi.org/10.1016/j.engfracmech.2018.10.009.
  31. O ner, E., Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.607.
  32. Orowan, E. (1949), "Fracture and strength of solids", Repts. Progr. Phys., 12, 185-232. https://doi.org/10.1088/0034-4885/12/1/309.
  33. Park, C.H. and Bobet, A. (2009), "Crack coalescence in specimens with open and closed flaws: A comparison", Int. J. Rock Mech. Min. Sci., 46(5), 819-829. https://doi.org/10.1016/j.ijrmms.2009.02.006.
  34. Park, C.H. and Bobet, A. (2010), "Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression", Eng. Fract. Mech., 77(14), 2727-2748. https://doi.org/10.1155/2021/6672913.
  35. Potyondy, D.O. (2012), "A flat-jointed bonded-particle material for hard rock", 46th US Rock Mechanics Geomechanics Symposium, OnePetro.
  36. Potyondy, D.O. (2015), "The bonded-particle model as a tool for rock mechanics research and application: Current trends and future directions", Geosyst. Eng., 18(1), 1-28. https://doi.org/10.1080/12269328.2014.998346.
  37. Potyondy, D.O. (2017), "Simulating perforation damage with a flat-jointed bonded-particle material", 51st US Rock Mechanics Geomechanics Symposium, San Francisco, California, USA.
  38. Potyondy, D.O. and Cundall, P.A. (2004), "A bonded-particle model for rock", Int. J. Rock Mech. Min. Sci., 41, 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011.
  39. Qian, X.K., Liang, Z.Z., Liao, Z.Y. and Wang, K. (2020), "Numerical investigation of dynamic fracture in rock specimens containing a pre-existing surface flaw with different dip angles", Eng. Fract. Mech. 223, 106675. https://doi.org/10.1155/2018/8027582.
  40. Reyes, O. and Einstein, H.H. (1991), "Failure mechanism of fractured rock-a fracture coalescence model", Proceedings of the 7th Congress of the ISRM, Aachen, Germany.
  41. Sagong, M. and Bobet, A. (2002), "Coalescence of multiple flaws in a rock- model material in uniaxial compression", Int. J. Rock Mech. Min. Sci., 39(2), 229-241. https://doi.org/10.1016/S1365-1609(02)00027-8.
  42. Steif, P.S. (1984), "Crack extension under compressive loading", Eng. Fract. Mech., 20(3), 463-473. https://doi.org/10.1016/0013-7944(84)90051-1.
  43. Uzun Yaylaci, E., Yaylaci, M., Olmez, H. and Birinci, A. (2020), "Artificial neural network calculations for a receding contact problem", Comput. Concrete, 25(6), 32-45. https://doi.org/10.12989/cac.2020. 25.6.032.
  44. Vasarhelyi, B. and Bobet, A. (2000), "Modeling of crack initiation, propagation and coalescence in uniaxial compression", Rock Mech. Min. Sci., 33(2), 119-139. https://doi.org/10.1016/j.ijmecsci.2017.05.019.
  45. Wong, L.N.Y. and Einstein, H.H. (2009a), "Crack coalescence in molded gypsum and Carrara marble: part 1-macroscopic observations and interpretation", Rock Mech. Rock Eng., 42(3), 475-511. https://doi.org/10.1007/s00603-008-0002-4.
  46. Wong, L.N.Y. and Einstein, H.H. (2009b), "Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression", Int. J. Rock Mech. Min. Sci., 46(2), 239-249. https://doi.org/10.1016/j.ijrmms.2008.03.006.
  47. Wu, Q.H., Li, X.B., Weng, L., Li, Q.F., Zhu, Y.J. and Luo, R. (2019), "Experimental investigation of the dynamic response of prestressed rockbolt by using an SHPB-based rockbolt test system", Tunnel. Underg. Space Tech., 93, 103088. https://doi.org/10.1016/j.tust.2019.103088.
  48. Wu, S. and Xu, X. (2016), "A study of three intrinsic problems of the classic discrete element method using flat-joint model", Rock Mech. Rock Eng., 49(5), 1813-1830. https://doi.org/10.1007/s00603-015-0890-z.
  49. Xie, Y., Cao, P., Liu, J. and Dong, L. (2016), "Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method", Comput. Geotech., 74, 1-14. https://doi.org/10.1016/j.compgeo.2015.12.013.
  50. Xu, Y. and Yuan, H. (2011), "Applications of normal stress dominated cohesive zone models for mixed-mode crack simulation based on extended finite element methods", Eng. Fract. Mech., 78, 544-558. https://doi.org/10.1016/j.engfracmech.2010.03.029.
  51. Yang, S.Q., Huang, Y.H. and Ranjith, P.G. (2018), "Failure mechanical and acoustic behavior of brine saturated-sandstone containing two pre-existing flaws under different confining pressures", Eng. Fract. Mech., 193, 108-121. https://doi.org/10.1016/j.engfracmech.2018.02.021.
  52. Yang, S.Q., Yang, Z., Zhang, P.C. and Tian, W.L. (2020), "Experiment and peridynamic simulation on cracking behavior of red sandstone containing a single non-straight fissure under uniaxial compression", Theor. Appl. Fract. Mech., 108, 102637. https://doi.org/10.1016/j.tafmec.2020.102637.
  53. Yang, W., Li, G., Ranjith, P.G. and Fang, L. (2019), "An experimental study of mechanical behavior of brittle rock-like specimens with multi-non-persistent joints under uniaxial compression and damage analysis", Int. J. Damag. Mech., 28(10), 1490-1522. https://doi.org/10.1177/1056789519832651.
  54. Yaylaci, M. (2016), "The investigation crack problem through numerical analysis", Struct. Eng. Mech., 57(6), 1143-1156., https://doi.org/10.12989/sem.2016.57.6.1143.
  55. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241.
  56. Zhang, B., Li, S., Yang, X., Xia, K., Liu, J., Guo, S. and Wang, S. (2019), "The coalescence and strength of rock-like materials containing two aligned X-type flaws under uniaxial compression", Geomech. Eng., 17, 47-56. https://doi.org/10.12989/gae.2019.17.1.047.
  57. Zhang, Q. et al. (2018), "Analysis of mechanical and acoustic emission characteristics of rock materials with double-hole defects based on particle flow code", Shock Vib., 32(1), 23-35. https://doi.org/10.1155/2018/7065029.
  58. Zhang, X. (2020), "Evaluation of structural safety reduction due to water penetration into a major structural crack in a large concrete project", Smart Struct. Syst., 26(3), 90-108. https://doi.org/10.12989/sss.2020.26.3.319.
  59. Zhao, Y.L., Zhang, L.Y., Wang, W.J., Tang, J.Z., Lin, H. and Wan, W. (2017), "Transient pulse test and morphological analysis of single rock fractures", Int. J. Rock Mech. Min. Sci., 91, 139-154. https://doi.org/10.1016/j.ijrmms.2016.11.016.
  60. Zhao, Y.L., Zhang, L.Y., Wang, W.J., Wan, W. and Ma, W.H. (2018), "Separation of elastoviscoplastic strains of rock and a nonlinear creep model", Int. J. Geomech., 18, 04017129. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001033.
  61. Zhou, T., Zhu, J.B., Ju, Y. and Xie, H.P. (2019), "Volumetric fracturing behavior of 3D printed artificial rocks containing single and double 3D internal flaws under static uniaxial compression", Eng. Fract. Mech., 205, 190-204. https://doi.org/10.1016/j.engfracmech.2018.11.030.
  62. Zhou, X.P., Li, G.Q. and Ma, H.C. (2020), "Real-time experiment investigations on the coupled thermomechanical and cracking behaviors in granite containing three pre-existing fissures", Eng. Fract. Mech., 224, 106797. https://doi.org/10.1016/j.engfracmech.2019.106797.
  63. Zhou, X.P., Li, L.H. and Berto, F. (2019), "Cracking behaviors of rock-like specimens containing two sets of preexisting cross flaws under uniaxial compression", J. Test. Eval., 47, 838-867. https://doi.org/10.1520/JTE20170358.
  64. Zhou, X.P., Zhang, J.Z. and Wong, L.N.Y. (2018), "Experimental study on the growth, coalescence and wrapping behaviors of 3D cross-embedded flaws under uniaxial compression", Rock Mech. Rock Eng., 51, 1379-1400. https://doi.org/10.1007/s00603-018-1406-4.
  65. Zhou, X.P., Zhang, J.Z., Yang, L.H. and Cui, Y.L. (2018), "Internal morphology of cracking of two 3-D pre-existing cross-embedded flaws under uniaxial compression", Geotech. Test. J., 41, 20170189. https://doi.org/10.1520/GTJ20170189.