DOI QR코드

DOI QR Code

Shield TBM disc cutter replacement and wear rate prediction using machine learning techniques

  • Kim, Yunhee (Department of Civil and Environmental Engineering, Dongguk University) ;
  • Hong, Jiyeon (Department of Civil and Environmental Engineering, Dongguk University) ;
  • Shin, Jaewoo (Department of Civil and Environmental Engineering, Dongguk University) ;
  • Kim, Bumjoo (Department of Civil and Environmental Engineering, Dongguk University)
  • Received : 2022.01.27
  • Accepted : 2022.03.10
  • Published : 2022.05.10

Abstract

A disc cutter is an excavation tool on a tunnel boring machine (TBM) cutterhead; it crushes and cuts rock mass while the machine excavates using the cutterhead's rotational movement. Disc cutter wear occurs naturally. Thus, along with the management of downtime and excavation efficiency, abrasioned disc cutters need to be replaced at the proper time; otherwise, the construction period could be delayed and the cost could increase. The most common prediction models for TBM performance and for the disc cutter lifetime have been proposed by the Colorado School of Mines and Norwegian University of Science and Technology. However, design parameters of existing models do not well correspond to the field values when a TBM encounters complex and difficult ground conditions in the field. Thus, this study proposes a series of machine learning models to predict the disc cutter lifetime of a shield TBM using the excavation (machine) data during operation which is response to the rock mass. This study utilizes five different machine learning techniques: four types of classification models (i.e., K-Nearest Neighbors (KNN), Support Vector Machine, Decision Tree, and Staking Ensemble Model) and one artificial neural network (ANN) model. The KNN model was found to be the best model among the four classification models, affording the highest recall of 81%. The ANN model also predicted the wear rate of disc cutters reasonably well.

Keywords

Acknowledgement

This research was supported by the Basic Science Research Program through the National research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2018R1D1A1A02085845).

References

  1. Abiodun, O.I., Jantan, A., Omolara, A.E., Dada, K.V., Mohamed, N.A. and Arshad, H. (2018), "State-of-the-art in artificial neural network applications: A survey", Heliyon, 4(11), e00938. https://doi.org/10.1016/j.heliyon.2018.e00938.
  2. Abu Alfeilat, H.A., Hassanat, A.B., Lasassmeh, O., Tarawneh, A.S., Alhasanat, M.B., Eyal Salman, H.S. and Prasath, V.S. (2019), "Effects of distance measure choice on k-nearest neighbor classifier performance: a review", Big data, 7(4), 221-248. https://doi.org/10.1089/big.2018.0175.
  3. Rezaei, A.H., Shirzehhagh, M. and Golpasand, M.R.B. (2019), "EPB tunneling in cohesionless soils: A study on Tabriz Metro settlements", Geomech. Eng., 19(2), 153-165. https://doi.org/10.12989/gae.2019.19.2.153.
  4. Bruland, A. (1988), "Hard rock tunnel boring", Ph.D. Dissertation, Norwegian University of Science and Technology, Trondheim
  5. Eftekhari, A. and Aalianvari, A. (2019), "An overview of several techniques employed to overcome squeezing in mechanized tunnels; A case study", Geomech. Eng., 18(2), 215-224. https://doi.org/10.12989/gae.2019.18.2.215.
  6. Farrokh, E. (2021), "Primary and secondary tools' life evaluation for soft ground TBMs", Bull. Eng. Geol. Environ., 80(6), 4909-4927. https://doi.org/10.1007/s10064-021-2223-4
  7. Farrokh, E. (2021), "Cutter change time and cutter consumption for rock TBMs", Tunn. Undergr. Sp. Tech., 114, 104000. https://doi.org/10.1016/j.tust.2021.104000.
  8. Frenzel, C., Kasling, H. and Thuro, K. (2008), "Factors influencing disc cutter wear", Geomechanik und Tunnelbau, 1(1), 55-60. https://doi.org/10.1002/geot.200800006.
  9. Gehring, K. (1995), "Leistungs- und Verschleissprognose im maschinellen Tunnelbau", Felsbau., 13(6), 439-448.
  10. Jeong, H., Zhang, N. and Jeon, S. (2018), "Review of technical issues for shield TBM tunneling in difficult grounds", J. Korean Tunn. Undergr. Sp. Assoc.., 28(1), 1-24. https://doi.org/10.7474/TUS.2018.28.1.001.
  11. Jung, H., Knag, H., Choi, J. and Chun, B. (2010), "Improvement plan of excavation performance based on Shield TBM performance prediction models and field data", J. Korean Geo-Environ. Soc., 11(2), 43-52. G704-SER000001652.2010.11.2.005.
  12. Kim, D., Pham, K., Park, S., Oh, J.Y. and Choi, H. (2020) "Determination of effective parameters on surface settlement during shield TBM", Geomech. Eng., 21(2), 153-164. https://doi.org/10.12989/gae.2020.21.2.153.
  13. Kim, K., Oh. J., Lee. H., Kim, D. and Choi, H. (2018), "Critical face pressure and backfill pressure in shield TBM tunneling on soft ground", Geomech. Eng., 15(3), 823-831. https://doi.org/10.12989/gae.2018.15.3.823.
  14. Kim, K.Y., Jo, S.A., Rye, H.H. and Cho, G.C. (2020), "Prediction of TBM performance based on specific energy", Geomech. Eng., 22(6), 489-496. https://doi.org/10.12989/gae.2020.22.6.489.
  15. Kovari, K. and Ramoni, M. (2006), "Urban tunnelling in soft ground using TMBs", International Conference and Exhibition on Tunnelling and Trenchless Technology: Tunnelling and trenchless technology in the 21st century. Subang Jaya-Selangor Darul Ehsan, January
  16. La, Y.S., Kim, M.I. and Kim, B. (2019), "Development of penetration rate prediction model using Shield TBM excavation data", J. Korean Tunn. Undergr. Sp. Assoc., 21(4), 519-534. https://doi.org/10.9711/KTAJ.2019.21.4.519
  17. Macias, F.J. (2016), "Hard rock tunnel boring: performance predictions and cutter life assessments", Ph.D. Dissertation, Norwegian University of Science and Technology, Trondheim
  18. Ma, H., Yin, L., Gong, Q. and Wang, J. (2015), "TBM tunneling in mixed-face ground: Problems and solutions", Int. J. Min. Sci. Tech., 25(4), 641-647. https://doi.org/10.1016/j.ijmst.2015.05.019.
  19. Patel, H.H. and Prajapati, P. (2018), "Study and analysis of decision tree based classification algorithms", Int. J. Comput. Sci. Eng., 6(10), 74-78.
  20. Rostami, J. (1997), "Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure", Ph.D. Dissertation, Colorado School of Mines, Colorado
  21. Schlkopf, B. and Smola, A.J. (2001) "Learning with Kernels: Support Vector Machines, Regularization, Optimization, and Beyond", MIT Press, Cambridge, UK
  22. Vapnik, V. and Chervonenkis, A. (1974), "Theory of Pattern Recognition [in Russian]", Statistical Learning Problems, Nauka, Moscow, Russia
  23. Vapnik, V.N. (1995), "The Nature of Statistical Learning Theory", Springer, New York, NY, USA