DOI QR코드

DOI QR Code

Estimation of Physical Parameters from Frequency Response Function Data

주파수응답함수 데이터로부터 부재의 물성치 추정

  • Hong, Yu-Sik (Dept, of Architectural Engineering, Kangwon National University) ;
  • Eun, Hee-Chang (Department of Architectural Engineering, Kangwon National University) ;
  • Song, Jun-Hyuk (Dept, of Architectural Engineering, Kangwon National University) ;
  • An, Jae-Hyoung (Dept, of Architectural Engineering, Kangwon National University)
  • Received : 2022.02.03
  • Accepted : 2022.05.10
  • Published : 2022.05.30

Abstract

The structure is deteriorated by various factors such as environmental effect and unexpected overloading. The structural performance in service is evaluated by various non-destructive tests and structural analysis. This study proposes an empirical method to predict physical parameters of structural member in the frequency domain. The method utilizes the frequency response function (FRF) data measured and collected by an impact hammer test assuming the fundamental vibration mode of the member. The validity of the proposed method is illustrated in two analytical examples and two experimental works. It is found that the physical parameters of beam member should be modified by correction factor predicted by the boundary conditions and wavelength of the fundamental mode. And it is observed that the parameters can be optimally predicted in taking the FRF data prior to the frequency that is directly outside the first resonance frequency. The results demonstrate that the physical parameters can be estimated very closely by the proposed method.

Keywords

Acknowledgement

이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임 (NRF-2020R1F1A1069328).

References

  1. Chen, P., Chen, Q., Xie, Z., Chen, X., & Zhao, S. A frequency-time algorithm of parameter estimation for sinusoidal signal in noise, Measurement Science Review 21, 33-38.
  2. De Rozario, R., & Oomen, T. (2021). Frequency response function identification of periodically scheduled linear parameter-varying systems, Mechanical Systems and Signal Processing, 148(1), doi/10.1016/j.ymssp.2020.107156.
  3. Doebling, S. W., & Farrar, C. R. (2001). Estimation of statistical distributions for modal parameters identified from averaged frequency response function data, Journal of Vibration & Control 7(4), 603-622. https://doi.org/10.1177/107754630100700407
  4. Fritzen, C. P. (1986). Identification of mass & stiffness matrices of mechanical systems, Journal of Vibration and Acoustics 108, 9-16. https://doi.org/10.1115/1.3269310
  5. Lee, M., & Richardson, M. (1992). Determining the accuracy of modal parameter estimation methods, IMAC X.
  6. Machado, M. R., Adhikari, S., Dos Santos, J. M. C., & Arruda J. R. F. (2018). Estimation of beam material random field properies via sensitivity-based model updating using experimental frequency response functions, Mechanical Systems & Signal Processing 102, 180-197. https://doi.org/10.1016/j.ymssp.2017.08.039
  7. Matsubara, M., Saito, A., & Kawamura, S. (2012). Estimation of modal parametes by using the ratios of imaginary to real parts of frequency response functions, Archive of Applied Mechanics, 91, 1179-1191. https://doi.org/10.1007/s00419-020-01817-w
  8. Rahmatalla, S., Eun, H.C., & Lee, E. T. (2012). Damage detection from the variation of parameter matrices estimated by incomplete FRF data, Smart Structures and Systems 9, 55-70. https://doi.org/10.12989/sss.2012.9.1.055
  9. Shih, C. Y., Tsuei, Y. G., Allenmang, R. J., & Brown, D. L.(1989). Complex mode indication function and its applications to spatial domain parameter estimation, International Modal Analysis Conference VII.
  10. Wang, F., Ling, X., Xu, X., & Zhang, F. (2014). Structural stiffness identification based on the extended Kalman filter research, Abstract and Applied Analysis, doi:10.1155/2014/103102.