DOI QR코드

DOI QR Code

Free vibration analysis of steel liquid storage tank with functionally graded column based on modified continuum mechanics

  • Cavus, Yakup Harun (Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University) ;
  • Kupeli, Togay (Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University) ;
  • Yayli, Mustafa Ozgur (Department of Civil Engineering, Faculty of Engineering, Bursa Uludag University)
  • Received : 2021.12.20
  • Accepted : 2022.05.15
  • Published : 2022.08.25

Abstract

It's important to note that the number of studies on the lateral vibration of steel liquid storage tanks has been quite modest in the past. The aim of this research has to look at the variables that affect vibration of storage tanks and to highlight the characteristics of a construction that hasn't received much attention in the literature. The storage tank has pre-sized in the study, and aluminum and steel have chosen as components. The specified material qualities and the factors utilized in the investigation has used to calculate vibration frequency values. The resulting calculations are backed up by tables and graphs, and it's an important to look into the parameters that affect the vibration frequencies that will occur on the designed storage tank vary. In the literature, water tanks are usually modelled as lumped masses. The horizontal stiffness of the column on which it is placed is assumed to be constant throughout. This is an approximation method of solving this problem. The column is handled in this study with a more realistic approach that fits the continuum mechanics in the analysis. The reservoir part is incorporated directly into the problem as the boundary condition.

Keywords

References

  1. Abdelrahman, A.A., Esen, I., Daikh, A.A. and Eltaher, M.A. (2021), "Dynamic analysis of FG nanobeam reinforced by carbon nanotubes and resting on elastic foundation under moving load", Mech. Bas. Des. Struct. Mach., 1-24. https://doi.org/10.1080/15397734.2021.1999263.
  2. Abdelrahman, A.A., Esen, I., Ozarpa, C., Shaltout, R., Eltaher, M.A. and Assie, A.E. (2021), "Dynamics of perforated higher order nanobeams subject to moving load using the nonlocal strain gradient theory", Smart Struct. Syst., 28, 515-531. https://doi.org/10.12989/sss.2021.28.4.515.
  3. Ali, B. and Dogangun, A. (2019), "Comparative investigation of dynamic analysis of cylindrical liquid storage tanks according to ACI 350 and EUROCODE 8", Academic Platform Journal of Engineering and Science, 7-3, 528-540.
  4. Chen, C., Fung, C., Wang, H. and Chen, W. (2021), "Dynamic response of functionally graded carbon nanotube-reinforced hybrid composite plates", J. Appl. Comput. Mech., https://doi.org/10.22055/jacm.2021.37884.3108.
  5. Chen, J.Z. (2010), "Generalized SDOF system for dynamic analysis of concrete rectangular liquid storage tanks", Department of Civil Engineering Ryerson University.
  6. Chen, J.Z. and Kianoush, M.R. (2009), "Generalized SDOF system for seismic analysis of concrete rectangular liquid storage tanks", Eng. Struct., 31, 2426-2435. https://doi.org/10.1016/j.engstruct.2009.05.019.
  7. Chen, J.Z., Ghaemmaghami, A.R. and Kianoush, M.R. (2008), "Dynamic analysis of concrete rectangular liquid storage tanks", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
  8. Civalek, O., Uzun, B. and Yayli, M.O. (2021), "Longitudinal vibration analysis of FG nanorod restrained with axial springs using doublet mechanics", Wave. Random Complex Media, 1-23. https://doi.org/10.1080/17455030.2021.2000675.
  9. Civalek, O., Uzun, B. and Yayli, M.O. (2022a), "Torsional vibrations of functionally graded restrained nanotubes", Eur. Phys. J. Plus, 137, 113. https://doi.org/10.1140/epjp/s13360-021-02309-8.
  10. Civalek, O., Uzun, B. and Yayli, M.O. (2022b), "Torsional and longitudinal vibration analysis of a porous nanorod with arbitrary boundaries", Physica B: Condens. Matter., 633, 413761. https://doi.org/10.1016/j.physb.2022.413761.
  11. Daouadj, T.H. and Adim, B. (2017), "Mechanical behaviour of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory", Struct. Eng. Mech., 61(1), 49-63. https://doi.org/10.12989/sem.2017.61.1.049.
  12. Dogangun, A. (1995), "Dikdortgen kesitli su depolarinin sonlu elemanlar yontemiyle depo-sivi-zemin etkilesimini dikkate alarak analitik yontemlerle karsilastirmali deprem hesabi", Doctoral Dissertation, Karadeniz Technical University.
  13. Esen, I., Abdelrahman, A.A. and Eltaher, M.A. (2021), "On vibration of sigmoid/symmetric functionally graded nonlocal strain gradient nanobeams under moving load", Int. J. Mech. Mater. Des., 17, 721-742. https://doi.org/10.1007/s10999-021-09555-9.
  14. Gyorgyi, J. (1981), "Frequency-dependent geometrical stiffness matrix for the vibration analysis of beam systems", Periodica Polytechnica Civil Eng., 25(3-4), 151-163.
  15. Gyorgyi, J. (1994), "Dynamic analysis of structures supporting a moving mass, exposed to external and internal damping", Periodica Polytechnica Civil Eng., 38(4), 387-398.
  16. Haroun, M.A. (1980), "Dynamic analysis of liquid storage tanks", California Institute of Technology, Earthquake Engineering Research Laboratory.
  17. Haroun, M.A. and Housner, G.W. (1981), "Earthquake response of deformable liquid storage tanks", J. Appl. Mech., 48, 411-418. https://doi.org/10.1115/1.3157631.
  18. Jun, L., Dafu, X. and Bingyan, J. (2014), "Random structural dynamic response analysis under random excitation", Periodica Polytechnica Civil Eng., 58(3), 293-299. https://doi.org/10.3311/PPci.7523.
  19. Kasimzade, A.A., Tuhta, S., Gunday, F. and Aydin, H. (2021), "obtaining dynamic parameters by using ambient vibration recordings on model of the steel arch bridge", Periodica Polytechnica Civil Eng., 65(2), 608-618. https://doi.org/10.3311/PPci.16422.
  20. Kotrosova, K. and Kormanikova, E. (2017), "Dynamic analysis of liquid storage tanks", AIP Conf. Proc., 1863, 260005. https://doi.org/10.1063/1.4992419.
  21. Kozluca, G. and Nohutcu, H. (2007), "Betonarme silindirik su depolarinda ekonomik boyutlarin belirlenmesi", J. Eng. Sci. Pamukkale Univ. Eng. Facult., 13(3), 305-309.
  22. Larkin, T. (2008), "Seismic response of liquid storage tanks incorporating soil structure interaction", J. Geotech. Geoenviron. Eng., 134(12), 1804-1814. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:12(1804).
  23. Malekzadeh Fard, K., Khajehdehi Kavanroodi, M., Malek-Mohammadi, H. and Pourmoayed, A. (2020), "Buckling and vibration analysis of a double-layer graphene sheet coupled with a piezoelectric nanoplate", J. Appl. Comput. Mech., 8(1), 129-143. https://doi.org/10.22055/jacm.2020.32145.1976.
  24. Malhotra, P.K., Wenk, T. and Wieland, M. (2000), "Simple procedure for seismic analysis of liquid-storage tanks", Struct. Eng. Int., 10(3), 197-201. https://doi.org/10.2749/101686600780481509.
  25. Nam Phan, H., Paolacci, F., Bursi, O.S. and Tondini, N. (2017), "Seismic fragility analysis of elevated steel storage tanks supported by reinforced concrete columns", J. Loss Prev. Proc. Indus., 47, 57-65. https://doi.org/10.1016/j.jlp.2017.02.017.
  26. Nemeth, R.K. and Alzubaidi, B.M.A. (2021), "The effect of continuous suspension constraint on the free vibration and buckling of a beam", Periodica Polytechnica Civil Eng., 65(3), 977-987. https://doi.org/10.3311/PPci.17954.
  27. Poloei, E., Zamanian, M. and Hosseini, S.A.A. (2017), "Nonlinear vibration analysis of an electrostatically excited micro cantilever beam coated by viscoelastic layer with the aim of finding the modified configuration", Struct. Eng. Mech., 61(2), 193-207. https://doi.org/10.12989/sem.2017.61.2.193.
  28. Pourabdy, M., Shishesaz, M., Shahrooi, S. and Roknizadeh, S. (2021), "Analysis of axisymmetric vibration of functionally-graded circular nano-plate based on the integral form of the strain gradient model", J. Appl. Comput. Mech., 7(4), 2196-2220. https://doi.org/10.22055/jacm.2021.37461.3021.
  29. Reddy, J.N. (2002), Energy Principles and Variational Methods in Applied Mechanics, Second Edition, John Wiley & Sons, New York.
  30. Reddy, J.N. (2007), "Nonlocal theories for bending, buckling and vibration of beams", Int. J. Eng. Sci., 45, 288-307. https://doi.org/10.1016/j.ijengsci.2007.04.004.
  31. Rossit, C.A., Bambill, D.V. and Gilardi, G.J. (2017). "Free vibrations of AFG cantilever tapered beams carrying attached masses", Struct. Eng. Mech., 61(5), 685-691. https://doi.org/10.12989/sem.2017.61.5.685.
  32. Ruiz, R.O., Lopez-Garcia, D. and Taflanidis, A.A. (2015), "An efficient computational procedure for the dynamic analysis of liquid storage tanks", Eng. Struct., 85, 206-218. https://doi.org/10.1016/j.engstruct.2014.12.011.
  33. Sabuncu, O., Kacin, S., Gursoy, G. and Genes, M.C. (2013), "Mevcut bir su deposunun dinamik ozelliklerinin titresim kayitlari ile belirlenmesi", 2, Turkiye Deprem Muhendisligi ve Sismoloji Konferansi, Eylul, MKu, Hatay.
  34. Soliman, A.E., Eltaher, M.A., Attia, M.A. and Alshorbagy, A.E. (2018), "Analysis of crack occurs under unsteady pressure and temperature in a natural gas facility by applying FGM", Struct. Eng. Mech., 66(1), 97-111. https://doi.org/10.12989/sem.2018.66.1.097.
  35. Soliman, A.E., Eltaher, M.A., Attia, M.A. and Alshorbagy, A.E. (2018), "Nonlinear transient analysis of FG pipe subjected to internal pressure and unsteady temperature in a natural gas facility", Struct. Eng. Mech., 66(1), 85-96. https://doi.org/10.12989/sem.2018.66.1.085.
  36. Tadi Beni, Z., Hosseini Ravandi, S. and Tadi Beni, Y. (2021), "Size-dependent nonlinear forced vibration analysis of Viscoelastic/Piezoelectric nano-beam", J. Appl. Comput. Mech., 7(4), 1878-1891. https://doi.org/10.22055/jacm.2020.32044.1958.
  37. Veletsos, A.S. (1974), "Seismic effects in flexible liquid storage tanks", Proceedings of the International Association for Earthquake Engineering Fifth World Conference, Rome, June.
  38. Vukobratovic, V. and Ladjinovic, D. (2013), "A simplified seismic analysis of circular liquid storage tanks", Proceedings of the 6th PSU-UNS International Conference on Engineering and Technology (ICET-2013).
  39. Yayli, M.O. (2015), "Buckling analysis of a rotationally restrained single walled carbon nanotube", Acta Physica Polonica A, 127, 3, 678-683. https://doi.org/10.24107/ijeas.252144.