DOI QR코드

DOI QR Code

Evaluation of blasting vibration with center-cut methods for tunnel excavation

  • Received : 2021.12.31
  • Accepted : 2022.08.12
  • Published : 2022.09.10

Abstract

Ground vibration generated repeatedly in blasting tunnel excavation sites is known to be one of the major hazards induced by blasting operations. Various studies have been conducted to minimize these hazards, both theoretical and empirical methods using electronic detonator, the deck charge method, the center-cut method among others Among these various existing methods for controlling the ground vibration, in this study, we investigated the cut method. In particular, we analyzed and compared the V-cut method, which is commonly used in tunnel blasting, to the double-drilled parallel method, which has recently been introduced in tunnel excavation site. To understand the rock fragmentation efficiency as well as the ground vibration controllability of the two methods, we performed in-situ field blasting tests with both cut methods at a tunnel excavation site. Additionally, numerical analysis by FLAC3D has been executed for a better understanding of fracture propagation pattern and ground vibration generation by each cut method. Ground vibration levels, by PPVs measured in field blasting tests and PPVs estimated in numerical simulations, showed a lower value in the double-drilled parallel compared with the V-cut method, although the exact values are quite different in field measurement and numerical estimation.

Keywords

Acknowledgement

This research was partly supported by Energy & Mineral Resources Development Association of Korea (EMRD) grant funded by the Korea government (MOTIE) (Educational-Industrial Cooperation Consortium of Energy and Mineral Resources Development-Training Program for Specialists in Smart Mining) and National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT, ME, MOTIE) (NRF-2017M3D8A2085342, the National Strategic Project, Carbon Upcycling).

References

  1. Dimitraki, L.S., Christaras, B.G. and Arampelos, N.D. (2021), "Investigation of blasting impact on limestone of varying quality using FEA", Geomech. Eng., 25(2), 111-121. https://doi.org/10.12989/gae.2021.25.2.111.
  2. KEI (Korea Environment Institute) (2015), Environmental Impact Statements and Manuals, KEI, Sejong, Korea.
  3. KIGAM (Korea Institute of Geoscience and Mineral Resources) (2021), Big Data Open Platform, KIGAM, Daejeon, Korea.
  4. Kim, N.S. (2016), "Test blasting report for Donghae railway (Pohang-Samcheok)", 11th Section Roadbed, NSB Now ENC, Seoul, Korea.
  5. Lee, M.S. and Kim, H.D. (2016), "Electronic blasting for excavating single line railway tunnel close to residential area", Explos. Blast., 34(3), 17-20.
  6. Lee, M.S., Kim, H.D., Lee, H. and Lee, J.W. (2018), "Tunnel blasting case by combination of electronic detonator and non-electric detonator", Explos. Blast., 36(1), 1-9.
  7. Lu, W., Yang, J., Chen, M. and Zhou, C. (2011), "An equivalent method for blasting vibration simulation", Simul. Model. Pract. Theory, 19(9), 2050-2062. https://doi.org/10.1016/j.simpat.2011.05. 012.
  8. National Highway Institute (1991), Rock Blasting and Overbreak Control, Federal Highway Administration, Washington D.C., USA.
  9. Oh, S.Y., Lee, C.S., Lee, K.K., Lee, D.H., Lee, S.J. and Park, J.H. (2017), "A study on the tunnel blasting technique with a combined application of electronic detonators and low vibration explosives in a close proximity to safety things". Explos. Blast., 35(4), 36-47.
  10. Ozacar, V. (2018), "New methodology to prevent blasting damages for shallow tunnel", Geomech. Eng., 15(6), 1227-1236. https://doi.org/10.12989/gae.2018.15.6.1227.
  11. Park, D., Jeon, B. and Jeon, S. (2009), "A numerical study on the screening of blast-induced waves for reducing ground vibration", Rock Mech. Rock Eng., 42(3), 449-473. https://doi.org/10.1007%2Fs00603-008-0016-y. https://doi.org/10.1007%2Fs00603-008-0016-y
  12. Qiu, X., Hao, Y., Shi, X., Zhang, S. and Gou, Y. (2018), "Numerical simulation of stress wave interaction in short-delay blasting with a single free surface", PLOS one, 13(9), 1-19. https://doi.org/10.1371/journal.pone.0204166.
  13. Song, Z.P., Li, S.H., Wang, J.B., Liu, J. and Chang, Y.Z. (2017), "Determination of equivalent blasting load considering millisecond delay effect", Geomech. Eng., 15(2), 745-754. https://doi.org/10.12989/gae.2018.15.2.745.
  14. Starfield, A.M. and Pugliese, J.M. (1968), "Compression waves generated in rock by cylindrical explosive charges: A comparison between a computer model and field measurements", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 5(1), 65-77. https://doi.org/10.1016/0148-9062(68)90023-5.
  15. Uyar, G.G. and Aksoy, C.O. (2019), "Comparative review and interpretation of the conventional and new methods in blast vibration analyses", Geomech. Eng., 18(5), 545-554. https://doi.org/10.12989/gae.2019.18.5.545.
  16. Won, Y.H. and Lee, H. (2007), "Introduction of tunnel blasting method by double-drilled parallel Cut", Proceedings of the KSEE Conference, Seoul, Korea, 77-85.
  17. Yilmaz, O. and Unlu, T. (2013), "Three-dimensional numerical rock damage analysis under blasting load", Tunnel. Undergr. Space Technol., 38, 266-278. https://doi.org/10.1016/j.tust.2013.07.007.