Geomechanics and Engineering

  • 제31권2호
  • /
  • Pages.149-158
  • /
  • 2022
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Utilization of ladle furnace slag from a steelwork for stabilization of soil cement

  • Ayawanna, Jiratchaya (School of Ceramic Engineering, Institute of Engineering, Suranaree University of Technology) ;
  • Kingnoi, Namthip (School of Ceramic Engineering, Institute of Engineering, Suranaree University of Technology) ;
  • Sukchaisit, Ochakkraphat (Department of Civil Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang) ;
  • Chaiyaput, Salisa (Department of Civil Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang)
  • 투고 : 2021.09.14
  • 심사 : 2022.09.29
  • 발행 : 2022.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Ladle furnace (LF) slag, waste from the steel-making process, was incorporated to improve the compressive strength of soil cement. LF slag was mixed to replace the cement in the soil-cement samples with wt% ratio 20:0, 15:5, and 10:10 of cement and slag, respectively. LF slag in the range of 5, 10, and 20 wt% was also separately added to the 20-wt% cement-treated soil samples. The soil-cement mixed LF slag samples were incubated in a plastic wrapping for 7, 14, and 28 days. The strength of soil cement was highly developed to be higher than the standard acceptable value (0.6 MPa) after incorporating slag into soil cement. The mixing of LF slag resulted in more hydration products for bonding soil particles, and hence improved the strength of soil cement. With the LF slag mixing either a replacement or additive materials in soil cement, the LF slag to cement ratio is considered to be less than 1, while the cement content should be more than 10 wt%. This is to promote a predominant effect of cement hydration by preventing the partially absorbed water on slag particles and keeping sufficient water content for the cement hydration in soil cement.

키워드

과제정보

This work was supported by King Mongkut's Institute of Technology Ladkrabang (KREF016321), Suranaree University of Technology (SUT), Thailand Science Research and Innovation (TSRI), and National Science, Research and Innovation Fund (NSRF) (Project code 90464).

참고문헌

  1. Aly, A. and Usama, H.I. (2014), "Stability of soft clay soil stabilised with recycled gypsum in a wet environment", Soils Found., 54(3), 405-416. http://doi.org/10.1016/j.sandf.2014.04.009.
  2. ASTM C-109/C 109M-05 (2005), Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). Annual Book of ASTM Standard, Philadelphia, PA, USA.
  3. ASTM D4318 (2005), Standard test methods for liquid limit, pastic limit, and plasticity index of soils. Annual Book of ASTM Standard, Philadelphia, PA, USA.
  4. Baghini, M.S., Ismail, A. and Firoozi, A.A. (2016), "Physical and mechanical properties of carboxylated styrene-butadiene emulsion modified Portland cement used in road base construction", J. Appl. Sci., 16, 344-358. https://doi.org/10.3923/jas.2016.344.358.
  5. Bo, X., Yeap, K. and Yi, Y. (2019), "Stabilization/solidification of ladle slag in cement-stabilized clay: towards a sustainable geoenvironment", Proceedings of the 8th Int. Cong. Environ. Geotech. https://doi.org /10.1007/978-981-13-2221-1_42.
  6. Bozbey, I., Kelesoglu, M.K., Oztoprak, S., Komut, M., Comez, S., Ozturk, T., Mert, A. and Ocal, K. (2021), "Effects of soaking on a lime stabilized clay and implications for pavement design", Geomech. Eng., 24(2), 115-127. http://doi.org/10.12989/gae.2021.24.2.115.
  7. Chaiyaput, S. and Ayawan Ayawanna, (2021a), "Lateritic soil stabilization by addition of steel slags", Geotech. Eng. J.
  8. Chaiyaput , S. and AyawanAyawanna, J. (2021b), "Stabilization of lateritic soil by ladle furnace slag for pavement subbase material", Geomech. Eng., 26(4), 232-331. https://doi.org /10.12989/gae.2021.26.4.323.
  9. Crowley, M. (1997), "Quality control for earth structures", Aust. Inst. Build. Pap., 8, 109-118.
  10. Jun, H., Lei, Z., Hong, W. and Juan, D. (2018) "Experimental study of the compressive strength of chemically reinforced organic-sandy soil", Geomech. Eng., 16(3), 247-255. http://dx.doi.org/10.12989/gae.2018.16.3.247
  11. Kontoleontos, F., Tsakiridis, P., Marinosa, A., Katsiotis, N., Kaloidas, V. and Katsioti, M. (2013), "Dry-grinded ultrafine cements hydration. Physicochemical and microstructural characterization", Mater. Res., 16(2), 404-416. https://doi.org/10.1590/S1516-14392013005000014.
  12. Li, C., Chen, Z., Wu, S., Li, B., Xie, J. and Xiao, Y. (2017), "Effects of steel slag fillers on the rheological properties of asphalt mastic", Constr. Build. Mater., 145(1), 383-391. https://doi.org/10.1016/j.conbuildmat.2017.04.034.
  13. Lin, F. and Meyer, C. (2009), "Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure", Cem. Concr. Res., 39(4), 255-265. https://doi.org/10.1016/j.cemconres.2009.01.014.
  14. Lv, S., Liu, C., Lan, J., Zhang, H., Zheng, J. and You, Z. (2018), "Fatigue equation of cement-treated aggregate base materials under a true stress ratio", Appl. Sci., 8(5), 691. https://doi.org/10.3390/app8050691.
  15. Ma, C., Chen, L. and Chen, B. (2014), "Analysis of strength development in soft clay stabilized with cement-based stabilizer", Constr. Build. Mater., 71, 354-362. https://doi.org/10.1016/j.conbuildmat.2014.08.087.
  16. Maghool, F., Arulrajah, A., Du, Y.J., Horpibulsuk, S. and Chinkulkijniwat, A. (2016), "Environmental impact of utilizing waste steel slag aggregates as recycled road construction materials", Clean. Technol. Environ., 19, 949-958. https://doi.org/10.1007/s10098-016-1289-6.
  17. Maghool, F., Arulrajah, A., Horpibulsuk, S. and Du. Y.J. (2017), "Geotechnical and geoenvironmental properties of ladle furnace slag and electric arc furnace slag in unbound pavement base/subbase applications", Proceedings of the 19th Int. Conf. Mech. Geotech. Eng., Seoul.
  18. Mahoutian, M. and Shao, Y. (2016), "Low temperature synthesis of cement from ladle slag and fly ash", J. Sustain. Cem.-Based Mater., 5(4), 247-258. https://doi.org/10.1080/21650373.2015.1047913.
  19. Minke, G. (2006), Building with Earth: Design and Technology of a Sustainable Architecture, Birkhauser, Boston, MA.
  20. Manso, J.M., Ortega-Lopez, V., Polanco, J.A. and Setien, J. (2013). "The use of ladle furnace slag in soil stabilization", Constr. Build. Mater., 40, 126-134. https://doi.org/10.1016/j.conbuildmat.2012.09.079.
  21. Moayyeri, N., Oulapour, M. and Haghighi, A. (2019), "Study of geotechnical properties of a gypsiferous soil treated with lime and silica fume", Geomech. Eng., 17(2), 195-206. http://doi.org/10.12989/gae.2019.17.2.195.
  22. Niazi, Y. and Jalili, M. (2009), "Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion", Constr. Build. Mater., 23(3), 1338-1343. https://doi.org/10.1016/j.conbuildmat.2008.07.020.
  23. Obianigwe, N. and Ngene, B.U. (2018), "Soil stabilization for road construction: comparative analysis of a three-prong approach", IOP Conf. Ser.: Mater. Sci. Eng., 413, 012023. https://doi.org/10.1088/1757-899X/413/1/012023.
  24. Onal, O. and Sariavci, C. (2019), "Stabilization of meles delta soils using cement and lime mixtures", Geomech. Eng., 19(6), 543-554. http://doi.org/10.12989/gae.2019.19.6.543.
  25. Salaheddin, H. and Seyed, M.M. (2018), "Effect of clay mineral types on the strength and microstructure properties of soft clay soils stabilized by epoxy resin", Geomech. Eng., 15(2), 729-738. http://doi.org/10.12989/gae.2018.15.2.729.
  26. Sargent, P. (2015), 21-the development of alkali-activated mixtures for soil stabilisation. Handbook of Alkali-Activated Cements, Mortars and Concretes. 555-604. https://doi.org/10.1533/9781782422884.4.555.
  27. Shalabi, F.I., Asi, I.M. and Qasrawi, H.Y. (2017), "Effect of by-product steel slag on the engineering properties of clay soils", J. King. Saud. Univ. Eng. Sci., 29, 394-399. https://doi.org/10.1016/j.jksues.2016.07.004.
  28. Songsuda, V. and Runglawan, R. (2013), "Chemical stabilization of soft Bangkok clay using the blend of calcium carbide residue and biomass ash", Soils Found., 53(2), 272-281. https://doi.org/10.1016/j.sandf.2013.02.007.
  29. Standards Australia. (2002), Australian earth building handbook. HB 195, Sydney Standard, Section 4 construction, volume 04.01 cement, Lime, Gypsum.
  30. Termkhajornkit, P., Vu, Q. H., Barbarulo, R., Daronnat, S. and Chanvillard, G. (2014), "Dependence of compressive strength on phase assemblage in cement pastes: beyond gel-space ratio- experimental evidence and micromechanical modelling", Cement Concr. Res., 56, 1-11. https://doi.org/10.1016/j.cemconres.2013.10.007.
  31. Torres, C., Rostom, S. and de Lasa, H. (2020), "An eco-friendly fluidizable FexOy/CaO-γ-Al2O3 catalyst for tar cracking during biomass gasification", Catalysts., 10(7), 806. https://doi.org/10.3390/catal10070806.
  32. Vanesa O.L., Juan M.M., Isidoro I.C. and Javier J.G. (2014), "ladle-furnace basic slags and their soil-stabilization applications", Constr. Build. Mater., 68, 455-464 https://doi.org/10.1016/j.conbuildmat.2014.07.023.
  33. Wu, J., Jinping, J., Sha, D. and Ping, D. (2020), "Hydration and microstructure of steel slag as cementitious material and fine aggregate in mortar", Molecules., 25, 4456. https://doi.org/10.3390/molecules25194456.
  34. Yi, J., Tung-Chai, L., Caijun, S. and Shu-Yuan, P. (2018), "Characteristics of steel slags and their use in cement and concrete-A review", Resour. Conserv. Recycl., 136, 187-197. https://doi.org/10.1016/j.resconrec.2018.04.023.
  35. Yishun, L., Guoxi, J., Kejin, W., Siraj, A.Q. and Wenjie. Y. (2020), "Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement", Constr. Build. Mater., 265, 120301. https://doi.org/10.1016/j.conbuildmat.2020.120301.
  36. Yongjia, H., Linnu, L., Leslie, J.S., Jennifer, L.R., Paramita, M., and Shuguang, H. (2013), "Effect of calcium-silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature", Mater. Struct., 47, 311-322. https://doi.org/10.1617/s11527-013-0062-0.