Journal of Industrial Convergence (산업융합연구)

DAEHAN Society of Industrial Management (대한산업경영학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Metal Sculpture Using Accidental Curves by Compression

압축기법의 우연적 곡선을 활용한 금속조형 연구

  • Seung-Geun, Ko (Department of Metal Jewellery Craft, Wonkwang University)
  • 고승근 (원광대학교 귀금속보석공예과)
  • Received : 2023.01.26
  • Accepted : 2023.02.20
  • Published : 2023.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This paper aims to complete the results obtained through various technical experiments in sculptures, not to derive the results through the existing design process. To this end, for the purpose of visually completing the accidental curve, an experiment was conducted to induce accidental curves using hitting on a metal craft, raising, and press techniques in which accidental curves can be obtained. As a result, the accidental curve was visually represented using red copper and brass through various compression methods using the press, which showed the best effect, and was completed with a candlestick. Through this, it was possible to obtain results through a technique-oriented modeling methodology rather than a design method that focuses on the meaning of form. I hope that the metal craft techniques will continue to be experimented with and that various researches using them will continue in the future.

본 논문은 기존의 디자인 과정을 통한 결과물 도출이 아닌, 다양한 기법적 실험을 통해 얻어진 결과물을 조형물로 완성하는 것을 목표로 연구되었다. 이를 위해 우연적 곡선을 시각적으로 완성하는 것을 목적으로 우연적 곡선이 얻어질 수 있는 금속공예기법인 틀에 대고 때리기, 레이징, 프레스기법을 활용하여 우연적 곡선을 유도하는 실험을 진행하였다. 그 결과 가장 좋은 효과가 나타난 프레스를 활용한 다양한 압축방법을 통해 우연적 곡선을 적동과 황동을 사용하여 시각적으로 나타내고 이를 촛대로 완성하였다. 이를 통해 형태의 의미에 집중한 디자인방법이 아닌, 기법 중심의 조형방법론을 통해 결과물을 얻을 수 있는 가능성을 알 수 있었다. 앞으로도 계속해서 금속공예기법을 실험하고 이를 활용한 다양한 연구가 계속되기를 바란다.

Keywords

Acknowledgement

This paper was supported by Wonkwang University in 2022.

References

  1. Wassily Kandinsky. (2011). For the analysis of point, line, and plane pictorial elements. Korea: Yeolhwadang.
  2. Moonchan.(2010). Basic molding THINKING. Seoul: Ahn Graphics.
  3. Choi Min-young, Kim Ji-hyun, Park Hye-sook, Lee Young-chun, Jeon Na-hyun.(2011). Basic molding Producing. Seoul: Ahn Graphics.
  4. J. Y. Lee.(2014). (A) Study on metallic modeling through an application : focusing on my lighting works. Master's thesis. Hongik University, Seoul.
  5. Moonchan(2012). Basic molding Communicating. Seoul: Ahn Graphics.
  6. HERBERT READ.(1991).what is art. Korea: Eulyumunhwasa.
  7. Byung-Eok Kim, Woong-Jik Lee.(1999). Design introduction. South Korea: Tae Hakwon.
  8. S. H. CHOI. (2010). (A) study on art furniture utilizing organic curves : with a focus on the usage of sheet metals. Master's thesis. Hongik University, Seoul.
  9. H. I. JEONG.(2013). A Study of Formative Qualities in Ornaments Featuring Lines and Repetitive Patterns. Master's thesis. Seoul National University of Science and Technology. Seoul.
  10. E. S. JANG. (2009). (A) study on personal jewelry using reptition expression of the line. Master's thesis. Dong-eui University. busan.
  11. H. J. LIM.(2003). A study on the design of office supplies using organic forms of plants. Master's thesis. Hongik University. Seoul.
  12. Yonghwan Jeon.(2003).Transforming cycles. https://blog.naver.com/j640515
  13. S. A. KWON(2012). A Study on the Metal Formative Works Expressing the Formativeness of Plants-Focusedon Metal Plate Work. Master's thesis. Hongik University, Seoul.
  14. J. H. YOON. (2016). A Study on Metal Craft for Metaphoric Expressions of Light. Doctoral thesis. Sookmyung Women's University, Seoul.