Bare Wafer 세정용 1 MHz 급 메가소닉 개발

Development of a 1 MHz Megasonic for a Bare Wafer Cleaning

  • 김현세 (한국기계연구원 고효율에너지기계연구부) ;
  • 임의수 (한국기계연구원 고효율에너지기계연구부)
  • Hyunse Kim (Innovative Energy Machinery Research Division, Korea Institute of Machinery and Materials) ;
  • Euisu Lim (Innovative Energy Machinery Research Division, Korea Institute of Machinery and Materials)
  • 투고 : 2023.04.14
  • 심사 : 2023.06.21
  • 발행 : 2023.06.30

초록

In semiconductor manufacturing processes, a cleaning process is important that can remove sub-micron particles. Conventional wet cleaning methods using chemical have limits in removing nano-particles. Thus, physical forces of a mechanical vibration up to 1 MHz frequency, was tried to aid in detaching them from the substrates. In this article, we developed a 1 MHz quartz megasonic for a bare wafer cleaning using finite element analysis. At first, a 1 MHz megasonic prototype was manufactured. Using the results, a main product which can improve a particle removal performance, was analyzed and designed. The maximum impedance frequency was 992 kHz, which agreed well with the experimental value of 986 kHz (0.6% error). Acoustic pressure distributions were measured, and the result showed that maximum / average was 400.0~432.4%, and standard deviation / average was 46.4~47.3%. Finally, submicron particles were deposited and cleaned for the assessment of the system performance. As a result, the particle removal efficiency (PRE) was proved to be 92% with 11 W power. Reflecting these results, the developed product might be used in the semiconductor cleaning process.

키워드

과제정보

본 연구에 기여한 한국기계연구원 이양래 박사님에게 감사드립니다. 또한 본 연구는 한국에너지기술평가원 연구과제 (NE3740) 및 한국기계연구원 주요사업 (KN022B)의 지원으로 수행되었습니다.

참고문헌

  1. Geng, H., "Semiconductor Manufacturing Handbook," McGraw-Hill, New York, USA, 2005. 
  2. IRDS (International Roadmap for Devices And Systems), https://irds.ieee.org/editions/2021/executive-summary, 2021. 
  3. Kim, H., and Lim, E., "Design of a Wave Cooling System using Design of Experiments," Trans. Korean Soc. Mech. Eng. B, Vol. 45, No. 9, pp. 501-507, 2021.  https://doi.org/10.3795/KSME-B.2021.45.9.501
  4. Huang, W., Zhang, X., Wu, C., Cao, S., and Zhou, Q., "Tool Wear Prediction in Ultrasonic Vibration-assisted Drilling of CFRP: A Hybrid Data-driven Physics Model-based Framework," Tribology International, Vol. 174, p. 107755, 2022. 
  5. Shah, U., Liu, X., Benatar, A., Kuprienko, A., and Zhang, W., "Computational Analysis of the Ultrasonic Effects on Resistance Spot Welding Process, Journal of Manufacturing Processes," Vol. 81, pp. 191-201, 2022.  https://doi.org/10.1016/j.jmapro.2022.06.050
  6. Jeong, A., M., Jeon, E. S., and Kim, C. H., "A Study on the Metal-Glass Bonding Using Ultrasonic," J. Semiconductor & Display Technology, Vol. 10, No. 2., pp. 103-108, 2011. 
  7. Ensminger, D., and Bond, L. J., Ultrasonics: Fundamentals, Technologies, and Applications, CRC Press, Sunnyvale, USA, 2012. 
  8. Ha, J., Lee, H., Park S., Shin, S., and Byun, C., "Computational Fluid Dynamics for Enhanced Uniformity of Mist-CVD Ga2O3 Thin Film," J. Semiconductor & Display Technology, Vol. 21, No. 4., pp. 81-85, 2022. 
  9. Kim, H., Lee, Y., and Lim, E., "Design and Fabrication of an L-type Waveguide Megasonic System for Cleaning of Nano-scale Patterns," Current Applied Physics, Vol. 9, pp. e189-e192, 2009.  https://doi.org/10.1016/j.cap.2008.12.058
  10. Kim, H., Lee, Y., and Lim, E., "Design and Fabrication of a Horn-Type Megasonic Waveguide for Nanoparticle Cleaning," IEEE Trans. on Semiconductor Manufacturing, Vol. 26, No. 2, pp. 221-225, 2013.  https://doi.org/10.1109/TSM.2013.2238563
  11. Zhu, G., Xu, Z., Jin, Y., Chen, X., Yang, L., Xu, J., Shan, D., Chen, Y., and Guo, B., "Mechanism and Application of Laser Cleaning: A Review, Optics and Lasers in Eng.," Vol. 157, p. 107130, 2022. 
  12. Li, Z., Chen, X., Yang, S., Zhang, D., Xu, J., Ma, R., Shan, D., and Guo, B., "Removal Mechanism of Liquid-assisted Nanosecond Pulsed Laser Cleaning TA15 Titanium Alloy Oxide Film," Journal of Materials Research and Tech., Vol. 157, p. 107130, 2022. 
  13. Cheng, Y., Wang, S., Li, H., Wang, C., Yang, Y., Lei, S., and Li, S., "Study on Particle Removal during the Co Post-CMP Cleaning Process," Colloids and Surfaces A: Physicochemical and Eng. Aspects, Vol. 627, p. 127189, 2021. 
  14. Kim, H. J., and Rovereto, M., "Effect of Brush Cleaning on Defect Generation in Post Copper CMP," Microelectronic Eng., Vol. 261, p. 111808, 2022. 
  15. Reinhardt, K. A., and Kern W., "Handbook of Silicon Wafer Cleaning Technology," Elsevier Inc., Amsterdam, Netherlands, 2018. 
  16. Kohli, R. and Mittal, K. L., "Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques," Elsevier Inc., Amsterdam, Netherlands, 2019.