DOI QR코드

DOI QR Code

The Tall Frontier of Timber in Australia: Opportunities for Promotion Versus Industry Hurdles

  • Published : 2023.06.01

Abstract

The use of Engineered Wood Systems (EWS), especially mass-timber, as a structural alternative or complement to steel and concrete is gaining interest and acceptance across different sectors of architecture, engineering, and construction, including in high-rise buildings. Focussing on the Australian context, this study examines the levels of adoption and barriers to using timber as a primary structural material in multi-storey buildings. Data collected from semi-structured interviews with stakeholders at the forefront of adoption in structural design, construction, and property development indicates that timber in multi-storey projects in Australia still faces industry-wide challenges. Designers' awareness and attitudes towards timber adoption are generally positive and suitable for flagship projects, including tall buildings, but for enduring and widespread impact, long-term investment in education within and outside the range of stakeholders already committed to promoting timber adoption is needed.

Keywords

Acknowledgement

This research was co-funded by FWPA (Forest and Wood Products Australia), grant number PNA461-1718 and the University of Melbourne, Faculty of Architecture, Building and Planning Research Development Grant.

References

  1. Australian Building Codes Board (2016) National Construction Code 2016. Building Code of Australia: Volume 1, Amendment 1, Section C.
  2. Connolly, T.; Loss, C.; Iqbal, A. and Tannert, T. (2018). Feasibility study of mass-timber cores for the UBC tall wood building. Buildings, 8, 98; doi:10.3390/buildings8080098.
  3. De Rijke, A. (2009). Engineered timber: a manifesto. The Architect's Journal, 229(4), 37-40.
  4. Evison, D.C.; Kremer, P.D. and Guiver, J. (2018). Mass timber construction in Australia and New Zealand - status, and economic and environmental influences on adoption. Wood and Fiber Science, 50, 128-138. https://doi.org/10.22382/wfs-2018-046
  5. European Cooperation in Science and Technology. Memorandum of Understanding for the Implementation of the COST Action "Holistic Design of Taller Timber Buildings" (HELEN) CA20139; European Cooperation in Science and Technology: Brussels, Belgium, 2021; Available online: https://www.cost.eu/cost-action/holistic-design-of-taller-timber-buildings (accessed on 30 December 2022).
  6. Fleming, P.; Smith, S. and Ramage, M. (2014). Measuring-up in timber: a critical perspective on mid and high-rise timber building design. Architectural Research Quarterly, 18(1), 20-30. https://doi.org/10.1017/S1359135514000268
  7. Foster, R.M.; Reynolds, T.P.S. and Ramage, M.H. (2016). Proposal for defining a tall timber building. Journal of Structural Engineering, 142, 02516001; doi:10.1061/(ASCE)ST.1943-541X.0001615.
  8. Green, M. and Taggart, J. (2017) Tall Wood Buildings: Design Construction. Birkhauser: Basel, Switzerland.
  9. Larasatie, P.; Guerrero, J.E.; Hall, T. and Hansen, E.. (2018) "What does the US Pacific Northwest public believe about tall wood buildings?". Proc. of the World Conference on Timber Engineering, Seoul, South Korea, August.
  10. Larsson, M.; Kaiser, A. and Girhammar, U.A.. (2015). Conflict and Compromise in multi-storey timber architecture. Architectural Research Quarterly, 19(3), 283-294. https://doi.org/10.1017/S1359135515000536
  11. Marfella, G. and Winson-Geideman, K. (2021). Timber and multi-storey buildings: industry perceptions of adoption in Australia. Buildings, 11, 653; doi: 10.3390/buildings11120653.
  12. Moore, R. (2018). Why wood is back at the top of the tree for architects. The Guardian, 28 January.
  13. SOM (2013) Timber Tower Research Project - Final Report. Softwood Lumber Board, Chicago, USA.
  14. Winson-Geideman, K.; Marfella, G. (2020) "Engineered timber in multi-storey construction: an industry perspective". Proc. the 26th Pacific Rim Real Estate Conference, Canberra, Australia, January, 59. 1-11.
  15. Wood Solutions. Timber Framed Construction for Commercial Buildings Classes 5, 6, 9a & 9b: Design and Construction Guide for BCA Compliant Sound and FireRated Construction; Forest and Wood Products Australia: Melbourne, Australia, 2019.