대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제39권10호
  • /
  • Pages.263-270
  • /
  • 2023
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

하프 프리캐스트 경량골재 콘크리트 일방향 슬래브의 시공하중 거동 평가

Evaluation on Construction Load Behavior of Half Precast One-Way Slab using Lightweight Aggregate Concrete

  • Kwon, Hee-Yong (Dept. of Architectural Engineering, Kyonggi University) ;
  • Yang, Keun-Hyuk (Dept. of Architectural Engineering, Kyonggi University) ;
  • Lee, Hye-Jin (Dept. of Architectural Engineering, Kyonggi University) ;
  • Lee, Yeon-Jung (Dept. of Architectural Engineering, Kyonggi University)
  • 투고 : 2023.08.21
  • 심사 : 2023.09.26
  • 발행 : 2023.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to assess the crack resistance and deflection control of half precast lightweight aggregate concrete one-way slabs when subjected to construction loads. The main parameters under consideration were the arrangement of tensile reinforcing bars and the use of micro-steel fibers. The flexural behavior of these slab specimens was assessed under a concentrated top two-point load. The results revealed that all slab specimens ultimately failed due to the concrete crushing in the compression zone, caused by the rapid propagation of flexural cracks. Notably, the flexural crack capacity of half precast one-way slabs reinforced with micro-steel fibers was approximately 2.04 times higher than the moment requirements for construction loads, as calculated by KDS 21 50. Although the moment of inertia for all slab specimens was roughly 15.0% lower than the effective moment of inertia at the limit deflection, as calculated by KDS 14 20, the disparity between the experimental and calculated values diminished as deflection increased. In summary, incorporating micro-steel fibers and prestressing into the half precast slabs increased their flexural crack resistance and stiffness, thereby improving safety against construction loads.

키워드

과제정보

이 연구는 국토교통부/국토교통과학기술진흥원의 지원을 받아 수행되었음(과제번호 RS-2020-KA156177)

참고문헌

  1. Abdulla, M. D., & Mosheer, K. A. M. (2022). Effect of Stirrups on the Behavior of Semi-Precast Concrete Slabs. Civil Engineering Journal 8(8), 1653-1664. https://doi.org/10.28991/CEJ-2022-08-08-09
  2. Hassanpour, M., Shafigh, P., & Mahmud, H. B. (2012). Lightweight Aggregate Concrete Fiber Reinforcement - A Review. Construction and Building Materials 37, 452-461. https://doi.org/10.1016/j.conbuildmat.2012.07.071
  3. Korea Agency for Technology and Standards. (2019). Standard Test Method for Making and Curing Concrete Specimens, KS F 2403. Korean Standards Association, 1-8. (In Korean)
  4. KDS 14 20 (2022). Standard for Structural Design of Concrete, Korea Construction Standards Center, Gyeonggi-do, Korea. (In Korean)
  5. KDS 21 50 (2022). Design Standard of Formwork and Support Bar, Korea Construction Standards Center, Gyeonggi-do, Korea. (In Korean)
  6. Lee, K. H., & Yang, K. H. (2021). Mechanical Properties of Lightweight Aggregate Concrete Using Expanded Bottom Ash and Dredged Soil Granules. Journal of the Architectural Institute of Korea 37(2), 189-196. (In Korean) https://doi.org/10.5659/JAIK.2021.37.2.189
  7. Mansour, F. R., Bakar, S. A., Ibrahim, I. S., Marsono, A. K., & Marabi, B. (2015). Flexural Performance of a Precast Concrete Slab with Steel Fiber Concrete Topping. Construction and Building Materials 75, 112-120. https://doi.org/10.1016/j.conbuildmat.2014.09.112
  8. Mohamed, M. S., Thamboo, J. A., & Jeyakaran, T. (2020). Experimental and Numerical Assessment of the Flexural Behaviour of Semi-Precast-Reinforced Concrete Slabs. Advances in Structural Engineering 23(9), 1865-1879. https://doi.org/10.1177/1369433220904011
  9. Oh, N. K., Yang, K. H., & Moon, J. H. (2022). Flexural Ductility of Lightweight Aggregate Concrete Shear Walls with Boundary Element. Journal of the Korea Concrete Institute 34(4), 345-351. (In Korean)
  10. PCI (2014). Bridge Design Manual 3rd edition, Precast/Prestressed Concrete Institute, Chicago, USA.
  11. Shannag, M. J. (2011). Characteristics of Lightweight Concrete Containing Mineral Admixtures. Construction and Building Materials 25, 658-662. https://doi.org/10.1016/j.conbuildmat.2010.07.025
  12. Tang, C. W. (2017). Strength Degeneracy of LWAC and Flexural Behavior of LWAC Members After Fire. Computers and Concrete 20(2), 177-184. https://doi.org/10.12989/CAC.2017.20.2.177
  13. Yang, K. H. (2010). Slump and Mechanical Properties of Hybrid Steel-PVA Fiber Reinforced Concrete. Journal of the Korea Concrete Institute 22(5), 651-658. (In Korean) https://doi.org/10.4334/JKCI.2010.22.5.651
  14. Yang, K. H. (2022). Evaluation of Curvature and Displacement Ductility Ratios of Lightweight Aggregate Concrete Columns. Journal of the Korea Concrete Institute 34(3), 235-242. (In Korean) https://doi.org/10.4334/JKCI.2022.34.3.235
  15. Yang, K. H., Kim, H. Y., Lee, H. J., & Lee, Y. J. (2022). Design Models for Flexural Toughness of Lightweight Aggregate Concrete Reinforced with Micro-Steel Fibers. Magazine of the Korea Concrete Institute 34(6), 78-84. (In Korean)