DOI QR코드

DOI QR Code

Monitoring and performance assessment of a highway bridge via operational modal analysis

  • Reza Akbari (Road Maintenance Department, Road Maintenance and Transportation Organization) ;
  • Saeed Maadani (Department of Engineering, Takestan Branch, Islamic Azad University) ;
  • Shahrokh Maalek (School of Civil Engineering, University of Tehran)
  • 투고 : 2023.03.08
  • 심사 : 2023.08.25
  • 발행 : 2023.09.25

초록

In this paper, through operational modal analysis and ambient vibration tests, the dynamic characteristics of a multi-span simply-supported reinforced concrete highway bridge deck was determined and the results were used to assess the quality of construction of the individual spans. Supporting finite element (FE) models were created and analyzed according to the design drawings. After carrying out the dynamic tests and extracting the modal properties of the deck, the quality of construction was relatively assessed by comparing the results obtained from all the tests from the individual spans and the FE results. A comparison of the test results among the different spans showed a maximum difference value of around 9.3 percent between the superstructure's natural frequencies. These minor differences besides the obtained values of modal damping ratios, in which the differences were not more than 5 percent, can be resulted from suitable performance, health, and acceptable construction quality of the bridge.

키워드

참고문헌

  1. Abdel-Jaber, H. and Glisic, B. (2019), "Monitoring of long-term prestress losses in prestressed concrete structures using fiber optic sensors", Struct. Health Monit., 18(1), 254-269. https://doi.org/10.1177/14759217177518.
  2. Akbari, R., Maadani, S., Abedi, A. and Maalek, S. (2019), "The effects of scour depth and riverbed condition on the natural frequencies of integral abutment bridges", Struct. Monit. Maint., 6(2), 85-101. https://doi.org/10.12989/smm.2019.6.2.085.
  3. Akbari, R., Maadani, S. and Maalek, S. (2019), "Dynamic assessment of horizontally curved reinforced concrete box-girder bridges", Pract. Period. Struct. Des. Constr., 24(4), 04019024. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000446.
  4. Akbari, R., Maadani, S. and Maalek, S. (2018), "On the fundamental natural frequency of bridge decks: review and applications", Proceedings of the ICE - Structures and Buildings, 171(12), 931-945. https://doi.org/10.1680/jstbu.17.00102.
  5. Akbari, R. and Maalek, S. (2009), "Evaluation of the shear modulus of elastomeric bridge bearings using modal data", J. Test. Eval., 37(2), 150-159. https://doi.org/10.1520/JTE101875
  6. Akbari, R. (2008), "The seismic behavior of irregular bridges with different piers heights and stiffnesses", PhD Thesis, School of Civil Engineering, University of Tehran, Iran
  7. Brincker R., Andersen, P. and Cantieni, R. (2001), "Identification and level 1 damage detection of the Z24 highway Bbridge by frequency domain decomposition", Exper. Techniques, 25(6), 51-57. https://doi.org/10.1111/j.1747-1567.2001.tb00047.x.
  8. Carden E.P. and Fanning P. (2004), "Vibration based condition monitoring: A review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/14759217040475.
  9. Cunha, A. and Caetano, E. (2006), "Experimental modal analysis of civil engineering structures", Sound and Vibration Magazine, 6(40), 12-20.
  10. Dang, N., Pham, Q. and Kim, J. (2022), "Hybrid vibration-impedance monitoring in prestressed concrete structure with local strand breakage", Smart Struct. Syst., 30(5), 463-477. https://doi.org/10.12989/sss2022.30.5.463.
  11. Huynh T, Park Y., Park J., Hong D. and Kim J. (2014), "Effect of temperature variation on vibration monitoring of prestressed concrete girders", Shock Vib., Article ID: 741618, https://doi.org/10.1155/2015/741618.
  12. Karimi, F., Akbari, R. and Maalek, S. (2019), "Assessment of the fundamental natural frequency of bridge decks", Asian J. Civil Eng., 20(7), 933-948. https://doi.org/10.1007/s42107-019-00155-9.
  13. Kim J., Ryu Y., Cho H. and Stubbs N. (2003), "Damage identification in beam-type structures: frequency-based method vs mode-shape-based method", Eng. Struct., 25(1), 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9.
  14. Leissa, A.W. (1973), "The free vibration of rectangular plates", J. Sound Vib., 31(3), 257-293. https://doi.org/10.1016/S0022-460X(73)80371-2.
  15. Maadani, S., Akbari, R. and Maalek, S. (2015), "Monitoring the dynamic characteristics of an urban bridge before, during and after widening", Struct. Infrastruct. Eng., 11(7), 944-956. https://doi.org/10.1080/15732479.2014.921827.
  16. Maalek, S., Akbari, R. and Ziaei-Rad, S. (2010), "The effects of the repair operations and replacement of the elastomeric bearings on the modal characteristics of a highway bridge", Struct. Infrastruct. Eng., 6(6), 753-765. https://doi.org/10.1080/15732470802334829.
  17. Min, J., Yun, C. and Hong, J. (2016), "An electromechanical impedance-based method for tensile force estimation and damage diagnosis of post-tensioning systems", Smart Struct. Syst., 17(1), 107-122. https://doi.org/10.12989/sss.2016.17.1.107.
  18. Wang, X., Kangas, S., Padur, D., Liu, X., Swanson, J.A., Helmicki, A.J. and Hunt, V.J. (2005), "Overview of a modal-based condition assessment procedure", J. Bridge Eng., 10(4), 460-467. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:4(460).
  19. Warburton, G.B. (1976), The dynamical behavior of structures, Pergamon Press, United Kingdom.
  20. Wenzel, H. (2009), Health Monitoring of Bridges, John Wiley & Sons, Ltd. NY. USA.