Advances in Computational Design

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Computational analysis of molecular dynamics results in a fuzzy stability system

  • C.C. Hung (Faculty of National Hsin Hua Senior High School) ;
  • T. Nguyen (Ha Tinh University) ;
  • C.Y. Hsieh (National Pingtung University Education School)
  • Received : 2023.11.07
  • Accepted : 2023.12.21
  • Published : 2024.01.25
⟨ Previous Next ⟩

Abstract

Owing to these mechanical properties, carbon nanotubes have the potential to be employed in many future devices and nanostructured materials. As an example, high Young modulus accompanied by their low density, makes them a good choice for reinforcing material in composites. Therefore, we empathize and manually derive the results which shows the utilized lemma and criterion are believed effective and efficient for aircraft structural analysis of composite and nonlinear scenarios. To be fair, the experiment by numerical computation and calculations were explained the perfectness of the methodology we provided in the research.

Keywords

References

  1. Abad, F., Rouzegar, J. and Lotfian, S. (2023), "Application of the exact spectral element method in the analysis of the smart functionally graded plate", Steel Compos. Struct., 47(2), 297-313. https://doi.org/10.12989/scs.2023.47.2.297.
  2. Akbari, A. (2023), "Seismic performance evaluation of steel moment resisting frames with mid-span rigid rocking cores", Steel Compos. Struct., 46(5), 621-635. https://doi.org/10.12989/scs.2023.46.5.621.
  3. Aksoylu, C., Ozkilic, Y.O., Yazman, S., Alsdudi, M., Gemi, L. and Arslan, M.H. (2023), "Numerical and analytical investigation of parameters influencing the behavior of shear beams strengthened by CFRP wrapping", Steel Compos. Struct., 47(2), 217. https://doi.org/10.12989/scs.2023.47.2.217.
  4. Al-Jaafari, M.A., Ahmed, R.A., Fenjan, R.M. and Faleh, N.M. (2023), "Nonlinear dynamic characteristic of sandwich graphene platelet reinforced plates with square honeycomb core", Steel Compos. Struct., 46(5), 659. https://doi.org/10.12989/scs.2023.46.5.659.
  5. Ayough, P., Wang, Y.H. and Ibrahim, Z. (2023), "Analytical study of concrete-filled steel tubular stub columns with double inner steel tubes", Steel Compos. Struct., 47(5), 645. https://doi.org/10.12989/scs.2023.47.5.645.
  6. Bai, L., (2023), "Mechanical behavior of steel tube encased high-strength concrete composite walls under constant axial load and cyclically increasing lateral load: Experimental investigation and modeling", Steel Compos. Struct., 47(1), 37. https://doi.org/10.12989/scs.2023.47.1.037.
  7. Banh, T.T., Nam, L.G. and Lee, D. (2023), "A smooth boundary scheme-based topology optimization for functionally graded structures with discontinuities", Steel Compos. Struct., 48(1), 73-88. https://doi.org/10.12989/scs.2023.48.1.073.
  8. Behshad, A., Shokravi, M., Alavijeh, A.S. and Karami, H. (2023), "Elastic wave propagation analysis in sandwich nanoplate assuming size effects", Steel Compos. Struct., 47(1), 71. https://doi.org/10.12989/scs.2023.47.1.071.
  9. Biao, N., Shanhua, X., WeiCheng, H., HuaPeng, C., AnBang, L. and ZongXing, Z. (2023), "Elastic local buckling behaviour of corroded cold-formed steel columns", Steel Compos. Struct., 48(1), 27. https://doi.org/10.12989/scs.2023.48.1.027.
  10. Bounouara, F., Sadoun, M., Saleh, M.M.S., Chikh, A., Bousahla, A.A., Kaci, A., ... & Tounsi, A. (2023), "Effect of visco-Pasternak foundation on thermo-mechanical bending response of anisotropic thick laminated composite plates", Steel Compos. Struct., 47(6), 693-707. https://doi.org/10.12989/scs.2023.47.6.693.
  11. Canovas-Gonzalez, M., Garcia-Guerrero, J.M. and Jorquera-Lucerga, J.J. (2023), "Validity of the Nielsentype hanger arrangement in spatial arch bridges with straight decks", Steel Compos. Struct., 47(1), 51. https://doi.org/10.12989/scs.2023.47.1.051.
  12. Chandrasekaran, A. and Nambiappan, U. (2023), "Experimental investigations on resilient beam-column end-plate connection with structural fuse", Steel Compos. Struct., 47(3), 315. https://doi.org/10.12989/scs.2023.47.3.315.
  13. Chen, C.W., Tsai, C.H., Tseng, C.B., Lin, S.G., Wang, M.H.L. and Chung, P.Y. (2002a), "Application of modeling and control to structural systems", Proc. Contr. Theory Appl., 149, 1-10.
  14. Chen, C.W., Tsai, C.H., Tseng, C.P., Wang, M.H.L. and Chung, P.Y. (2002b), "A novel fuzzy regression approach on managing target cash balance for construction firms", Proceedings of the 17th IASTED International Conference on Modeling and Simulation, Montreal, Canada.
  15. Chen, C.W., Chiang, W.L., Yeh, K., Chen, Z.Y. and Lu, L.T. (2002c), "A stability criterion of time-delay fuzzy systems", J. Marine Sci. Technol., 10(1), 5.
  16. Chen, C.W., Yeh, K., Chen, Z.Y., Huang, J.D. and Chiang, W.L. (2002d), "Model-based fuzzy control for nonlinear tuned mass damper systems with multiple time delays", Proceedings of the 2002 IEEE International Conference. https://doi.org/10.1109/ICIT.2002.1189862.
  17. Chen, C.Y., Lee, C.P. and Chen, C.W. (2002e), "On the permeability inside the granular media", J. Marine Sci. Technol., 10(2), 9.
  18. Chen, Z.Y., Chen, C.W., Chiang, W.L. and Huang, J.D. (2002f), "Fuzzy control for nonlinear systems modeled via neural-network", Proceedings of the 2002 IEEE International Conference on Industrial Technology, 1, 66-71. https://doi.org/10.1109/ICIT.2002.1189863.
  19. Chen, C.W., Chiang, W.L. and Hsiao, F.H. (2004a), "Stability analysis of T-S fuzzy models for nonlinear multiple time-delay interconnected systems", Math. Comput. Simul., 66(6), 523-537. https://doi.org/10.1016/j.matcom.2004.04.001.
  20. Chen, C.W., Chiang, W.L., Hsiao, F.H. and Tsai, C.H. (2004b), "H/sup/spl infin//fuzzy control of structural systems using Takagi-Sugeno fuzzy model", Proceedings of the IEEE International Conference on Mechatronics, ICM'04, 340-345.
  21. Chen, C.W., Chen, C.Y., Wang, M.H., Yeh, K. and Hsieh, T.Y. (2004c), "Fuzzy regression to construction management via TS fuzzy model", Artificial Intelligence and Applications: IASTED International Conference Proceedings, as Part of the 22nd IASTED International Multi-Conference on Applied Informatics.
  22. Chen, C.Y., Hsu, J.R.C. and Chen, C.W. (2005), "Fuzzy logic derivation of neural network models with time delays in subsystems", Int. J. Artif. Intel. Tool., 14(6), 967-974. https://doi.org/10.1142/S021821300500248X.
  23. Chen, C. (2006a), "Numerical model of internal solitary wave evolution on impermeable variable seabed in a stratified two-layer fluid system", Chin Ocean Eng, 20(2), 303-313.
  24. Chen, C. (2006b), "S-curve regression of fuzzy method and statistical application", Proceedings of the 10 th IASTED International Conference on Artificial Intelligence and Soft Computing.
  25. Chen, C., Hsu, R. and Chen, C. (2006), "Energy dissipation and velocity distribution of internal soliton encountering submerged triangular obstacle", J. Southwest Jiaotong Univ.,
  26. Chen, C.W. (2006c), "Stability conditions of fuzzy systems and its application to structural and mechanical systems", Adv. Eng. Softw., 37(9), 624-629. https://doi.org/10.1016/j.advengsoft.2005.12.002.
  27. Chen, C.W., Chiang, W.L., Tsai, C.H., Chen, C.Y. and Wang, M.H. (2006d), "Fuzzy Lyapunov method for stability conditions of nonlinear systems", Int. J. Artif. Intel. Tool., 15(2), 163-171. https://doi.org/10.1142/S0218213006002618.
  28. Chen, C.Y., Tseng, I.F., Yang, H.C.P., Chen, C.W. and Chen, T.H. (2006e), "Profile evolution and energy dissipation for internal soliton transmitting over different submarine ridges", China Ocean Eng., 20(4), 585-594.
  29. Chen, C.W., Chen, C.Y., Hsien-Chueh Yang, P. and Chen, T.H. (2007a), "Analysis of experimental data on internal waves with statistical method", Eng. Comput., 24(2), 116-150. https://doi.org/10.1108/02644400710729536.
  30. Chen, C.W., Chen, C.Y., Tseng, C.P. and Tsai, C.H. (2007b), "Application of fuzzy stability control for buildings", Artif. Intel. Appl., 592-597.
  31. Chen, C.W., Yeh, K., Chiang, W.L., Chen, C.Y. and Wu, D.J. (2007d), "Modeling, H∞ control and stability analysis for structural systems using Takagi-Sugeno fuzzy model", J. Vib. Control, 13(11), 1519-1534. https://doi.org/10.1177/1077546307073690.
  32. Chen, C.Y., Chen, C.W. and Tseng, I.F. (2007d), "Localized mixing due to an interfacial solitary wave breaking on seabed topography in different ridge heights", J. Offshore Mech. Arct. Eng., 129(3), 245-250. https://doi.org/10.1115/1.2426991.
  33. Chen, C.Y., Chen, C.W., Yeh, K. and Tseng, C.P. (2007e), "Stability analysis for floating structures using TS fuzzy control", Advanced Intelligent Computing Theories and Applications, With Aspects of Artificial Intelligence, ICIC 2007, Qingdao, China, August. https://doi.org/10.1007/978-3-540-74205-0_79.
  34. Chen, C.Y., Hsu, J.R.C., Chen, C.W., Chen, H.H., Kuo, C.F. and Cheng, M.H. (2007f), "Generation of internal solitary wave by gravity collapse", J. Marine Sci. Technol., 15(1), 1.
  35. Chen, C.Y., Hsu, J.R.C., Chen, C.W., Kuo, C.F., Chen, H.H. and Cheng, M.H. (2007g), "Wave propagation at the interface of a two-layer fluid system in the laboratory", J. Marine Sci. Technol., 15(1), 2.
  36. Chen, C.Y., Hsu, J.R.C., Chen, H.H., Kuo, C.F. and Cheng, M.H. (2007h), "Laboratory observations on internal solitary wave evolution on steep and inverse uniform slopes", Ocean Eng., 34(1), 157-170. https://doi.org/10.1016/j.oceaneng.2005.11.019.
  37. Chen, T.H., Chen, C.Y., Yang, H.C.P. and Chen, C.W. (2008a), "A mathematical tool for inference in logistic regression with small-sized data sets: A practical application on ISW-ridge relationships", Math. Prob. Eng., 2008, 186372. https://doi.org/10.1155/2008/186372.
  38. Chen, C.Y., Hsu, J.R.C., Cheng, M.H. and Chen, C.W. (2008b), "Experiments on mixing and dissipation in internal solitary waves over two triangular obstacles", Environ. Fluid Mech., 8, 199-214. https://doi.org/10.1007/s10652-008-9055-x.
  39. Chen, C.Y., Yang, H.C.P., Chen, C.W. and Chen, T.H. (2008c), "Diagnosing and revising logistic regression models: effect on internal solitary wave propagation", Eng. Comput., 25(2), 121-139. https://doi.org/10.1108/02644400810855940.
  40. Chen, P.C., Chen, C.W. and Chiang, W.L. (2008d), "GA-based fuzzy sliding mode controller for nonlinear systems", Math. Prob. Eng., 2008, 325859. https://doi.org/10.1155/2008/325859.
  41. Chen, C.W. and Chen, C.Y. (2008), "Stability analysis for time delay TLP systems", Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 1103-1107. https://doi.org/10.1109/AIM.2008.4601816.
  42. Chen, C.W. (2009a), "Modeling and control for nonlinear structural systems via a NN-based approach", Exp. Syst. Appl., 36(3), 4765-4772. https://doi.org/10.1016/j.eswa.2008.06.062.
  43. Chen, C.W. (2009b), "The stability of an oceanic structure with T-S fuzzy models", Math. Comput. Simul., 80(2), 402-426. https://doi.org/10.1016/j.matcom.2009.08.001.
  44. Chen, C.W., Wang, M.H. and Lin, J.W. (2009a), "Managing target the cash balance in construction firms using a fuzzy regression approach", Int. J. Uncertain., Fuzz. Knowl. Based Syst., 17(5), 667-684. https://doi.org/10.1142/S0218488509006200.
  45. Chen, C.W., Yeh, K. and Liu, K.F.R. (2009b), "Adaptive fuzzy sliding mode control for seismically excited bridges with lead rubber bearing isolation", Int. J. Uncertain., Fuzz. Knowl. Based Syst., 17(5), 705-727. https://doi.org/10.1142/S0218488509006224.
  46. Chen, C.Y., Shen, C.W., Chen, C.W., Liu, K.F.R. and Jeng, M.J. (2009c), "A stability criterion for time-delay tension leg platform systems subjected to external force", China Ocean Eng., 23(1), 49-57.
  47. Chen, P.C., Chen, C.W. and Chiang, W.L. (2009d), "GA-based modified adaptive fuzzy sliding mode controller for nonlinear systems", Exp. Syst. Appl., 36(3), 5872-5879. https://doi.org/10.1016/j.eswa.2008.07.003.
  48. Chen, P.C., Yeh, K., Chen, C.W. and Chen, C.Y. (2009e), "Application to GA-based fuzzy control for nonlinear systems with uncertainty", Proceedings of the 2009 First Asian Conference on Intelligent Information and Database Systems, 249-252. https://doi.org/10.1109/ACIIDS.2009.86.
  49. Chen, P.C., Yeh, K., Chen, C.W. and Lin, S.H. (2009f), "Stability analysis of fuzzy control for nonlinear systems", Proceedings of the 2009 First Asian Conference on Intelligent Information and Database Systems, 238-242. https://doi.org/10.1109/ACIIDS.2009.83.
  50. Chen, T.H., Yang, H.C., Chen, C.Y. and Chen, C.W. (2009g), "Application of logistic regression model: propagation effect on internal soliton", J. Chung Cheng Inst. Technol., 37, 1-10.
  51. Chen, C.W. (2010a), "Application of fuzzy-model-based control to nonlinear structural systems with time delay: An LMI method", J. Vib. Control, 16(11), 1651-1672. https://doi.org/10.1177/1077546309104185.
  52. Chen, C.W. (2010b), "Modeling and fuzzy PDC control and its application to an oscillatory TLP structure", Math. Prob. Eng., 2010, 120403. https://doi.org/10.1155/2010/120403.
  53. Chen, C.W. and Chen, P.C. (2010a), "GA-based adaptive neural network controllers for nonlinear systems", Int. J. Innov. Comput., Inform. Control, 6(4), 1793-1803.
  54. Chen, T.H. and Chen, C.W. (2010b), "Application of data mining to the spatial heterogeneity of foreclosed mortgages", Exp. Syst. Appl., 37(2), 993-997. https://doi.org/10.1016/j.eswa.2009.05.076.
  55. Chen, C.W., Shen, C.W., Chen, C.Y. and Cheng, M.J. (2010a), "Stability analysis of an oceanic structure using the Lyapunov method", Eng. Comput., 27(2), 186-204. https://doi.org/10.1108/02644401011022364.
  56. Chen, C.Y., Lee, W.I., Kuo, H.M., Chen, C.W. and Chen, K.H. (2010b), "The study of a forecasting sales model for fresh food", Exp. Syst. Appl., 37(12), 7696-7702. https://doi.org/10.1016/j.eswa.2010.04.072.
  57. Chen, C.Y., Lee, W.I., Sui, Y.C. and Chen, C.W. (2010c), "Applying half-circle fuzzy numbers to control system: a preliminary study on development of intelligent system on marine environment and engineering", Int. J. Marine Environ. Sci., 4(12), 1980-1984.
  58. Chen, C.Y., Lin, J.W., Lee, W.I. and Chen, C.W. (2010d), "Fuzzy control for an oceanic structure: a case study in time-delay TLP system", J. Vib. Control, 16(1), 147-160. https://doi.org/10.1177/1077546309339424.
  59. Chen, C.Y., Yang, Y.F., Chen, C.W., Chen, L.T. and Chen, T.H. (2010e), "Linking the balanced scorecard (BSC) to business management performance: A preliminary concept of fit theory for navigation science and management", Int. J. Phys. Sci., 5(8), 1296-1305.
  60. Chen, C.W. (2011a), "A critical review of nonlinear fuzzy multiple time-delay interconnected systems using the Lyapunov criterion", Scientif. Res. Essay., 6(28), 5917-5932. https://doi.org/10.5897/SRE11.1347.
  61. Chen, C.W. (2011b), "A critical review of parallel distributed computing and the Lyapunov criterion for multiple time-delay fuzzy systems", Int. J. Phys. Sci., 6(19), 4492-4501. https://doi.org/10.5897/IJPS11.908.
  62. Chen, C.W. (2011c), "Internet services and interface design for marketing: A preliminary study of Cliven products", Int. J. Phys. Sci., 6(15), 3585-3596. https://doi.org/10.5897/IJPS11.606.
  63. Chen, C.W. (2011d), "Modeling, control, and stability analysis for time-delay TLP systems using the fuzzy Lyapunov method", Neur. Comput. Appl., 20, 527-534. https://doi.org/10.1007/s00521-011-0576-8.
  64. Chen, C.W. (2011e), "Stability analysis and robustness design of nonlinear systems: an NN-based approach", Appl. Soft Comput., 11(2), 2735-2742. https://doi.org/10.1016/j.asoc.2010.11.004.
  65. Chen, C.W., Chen, P.C. and Chiang, W.L. (2011a), "Stabilization of adaptive neural network controllers for nonlinear structural systems using a singular perturbation approach", J. Vib. Control, 17(8), 1241-1252. https://doi.org/10.1177/1077546309352827.
  66. Chen, C.W., Tseng, C.P., Lee, K.L. and Yang, H.C. (2011b), "Conceptual framework and research method for personality traits and sales force automation usage", Scientif. Res. Essay., 6(17), 3784-3793. https://doi.org/10.5897/sre11.1022.
  67. Chen, P.C., Chen, C.W. and Chiang, W.L. (2011c), "Linear matrix inequality conditions of nonlinear systems by genetic algorithm-based H∞ adaptive fuzzy sliding mode controller", J. Vib. Control, 17(2), 163-173. https://doi.org/10.1177/1077546309352826.
  68. Chen, P.C., Chen, C.W., Chiang, W.L. and Lo, D.C. (2011d), "GA-based decoupled adaptive FSMC for nonlinear systems by a singular perturbation scheme", Neur. Comput. Appl., 20, 517-526. https://doi.org/10.1007/s00521-011-0540-7.
  69. Chen, C.W. and Tseng, C.P. (2012), "Default risk-based probabilistic decision model for risk management and control", Nat. Hazard., 63, 659-671. https://doi.org/10.1007/s11069-012-0183-8.
  70. Chen, C.W., Chang, M.L. and Tseng, C.P. (2012a), "Retracted: Human factors of knowledge-sharing intention among taiwanese enterprises: A model of hypotheses", Human Fact. Ergonom. Manuf. Serv. Industr., 22(4), 362-371. https://doi.org/10.1002/hfm.20286.
  71. Chen, C.W., Liu, K.F.R., Tseng, C.P., Hsu, W.K. and Chiang, W.L. (2012b), "Hazard management and risk design by optimal statistical analysis", Nat. Hazard., 64, 1707-1716. https://doi.org/10.1007/s11069-012-0329-8.
  72. Chen, C.W., Tseng, C.P., Hsu, W.K. and Chiang, W.L. (2012c), "A novel strategy to determine the insurance and risk control plan for natural disaster risk management", Nat. Hazard., 64, 1391-1403. https://doi.org/10.1007/s11069-012-0305-3.
  73. Chen, C.W. (2013), "A study of PDC fuzzy control of structural systems using LMI approach", Proceedings of the IASTED International Conference, Applied Informatics.
  74. Chen, C.W., Lee, C.C., Chen, C.H. and Tseng, C.P. (2013a), "The integration of nautical hazard assessment and harbor GIS models to the Taichung Port area in Taiwan", Nat. Hazard., 67, 275-294. https://doi.org/10.1007/s11069-013-0559-4.
  75. Chen, C.W., Lee, C.C., Tseng, C.P. and Chen, C.H. (2013b), "Application of GIS for the determination of hazard hotspots after direct transportation linkages between Taiwan and China", Nat. Hazard., 66, 191-228. https://doi.org/10.1007/s11069-012-0402-3.
  76. Chen, C.W., Lee, K.L., Tseng, C.P., Yang, H.C. and Liu, C.C. (2013c), "Retracted: The relationship between personality traits and sales force automation usage: A preliminary study", Human Fact. Ergonom. Manuf. Serv. Industr., 23(3), 243-253. https://doi.org/10.1002/hfm.20313.
  77. Chen, C.W., Lin, C.L., Tsai, C.H., Chen, C.Y. and Yeh, K. (2007), "A novel delay-dependent criterion for time-delay TS fuzzy systems using fuzzy Lyapunov method", Int. J. Artif. Intel. Tool., 16(3), 545-552. https://doi.org/10.1142/S0218213007003400.
  78. Chen, C.W., Liu, K.F.R., Lin, M.L. and Tseng, C.P. (2013d), "A new viewpoint of hazard assessment and management for Taiwan's insurance issues", Nat. Hazard., 65, 303-314. https://doi.org/10.1007/s11069-012-0363-6.
  79. Chen, C.W., Chang, M.L., Tseng, C.P., Chen, B.C. and Chang, Y.Y.C. (2013e), "Retracted: Critical human factor evaluation of knowledge sharing intention in Taiwanese enterprises", Human Fact. Ergonom. Manuf. Serv. Industr., 23(2), 95-106. https://doi.org/10.1002/hfm.20300.
  80. Chen, C.W., Yang, H.C., Chen, C.H., Tseng, C.P. and Lee, K.L. (2013f), "Retracted: The relationship between personality traits and sales force automation usage: A Review of Methodology", Human Fact. Ergonom. Manuf. Serv. Industr., 23(4), 294-305. https://doi.org/10.1002/hfm.20311.
  81. Chen, C.W. (2014a), "A criterion of robustness intelligent nonlinear control for multiple time-delay systems based on fuzzy Lyapunov methods", Nonlin. Dyn., 76, 23-31. https://doi.org/10.1007/s11071-013-0869-9.
  82. Chen, C.W. (2014b), "Interconnected TS fuzzy technique for nonlinear time-delay structural systems", Nonlin. Dyn., 76, 13-22. https://doi.org/10.1007/s11071-013-0841-8.
  83. Chen, C.W. (2015a), "Smart monitoring system with multi-criteria decision using a feature based computer vision technique", Smart Struct. Syst., 15(6), 1583-1600. https://doi.org/10.12989/sss.2015.15.6.1583.
  84. Chen, C.W. (2015b), "Structural system simulation and control via NN based fuzzy model", Struct. Eng. Mech., 56(3), 385-407. https://doi.org/10.12989/sem.2015.56.3.385.
  85. Chen, B., Cao, L., Lu, F. and Chen, Y.F. (2023a), "Experimental study on vibration serviceability of coldformed thin-walled steel floor", Steel Compos. Struct., 46(4), 577. https://doi.org/10.12989/scs.2023.46.4.577.
  86. Chen, Y., Jiang, Z., Xu, Q. and Ren, C. (2023b), "Experimental study on fatigue behavior of innovative hollow composite bridge slabs", Steel Compos. Struct., 46(6), 745. https://doi.org/10.12989/scs.2023.46.6.745.
  87. Cheng, M.H., Hsu, J.R.C., Chen, C.Y. and Chen, C.W. (2009), "Modelling the propagation of an internal solitary wave across double ridges and a shelf-slope", Environ. Fluid Mech., 9, 321-340. https://doi.org/10.1007/s10652-008-9104-5.
  88. Cheng, X. and Wu, Y. (2023), "On wave propagation of football ball in the free kick and the factors affecting it", Steel Compos. Struct., 46(5), 669. https://doi.org/10.12989/scs.2023.46.5.669.
  89. Chen-yuan, C.H.E.N., Rong-chung, H.J. and Cheng-wu, C.H.E.N. (2007a), "Interfacial wave motion in an impermeable rigid channel with stratified density fluid system, 2, Waveform feature against stratification thickness ratio", Adv. Water Sci., 18(4), 575-579.
  90. Chen-yuan, C.H.E.N., Rong-chung, H.J. and Cheng-wu, C.H.E.N. (2007b), "Interfacial wave motion in an impermeable rigid channel with stratified density fluid system, 1, Wave evolution related to various energy conditions", Adv. Water Sci., 18(4), 570-574.
  91. Chiang, W.L. (2010), "A neural-network approach to modeling and analysis", Proceedings of the International Conference on Tools with Artificial Intelligence.
  92. Chiang, W.L., Chen, T.W., Liu, M.Y. and Hsu, C.J. (2001), "Application and robust H?? control of PDC fuzzy controller for nonlinear systems with external disturbance", J. Marine Sci. Technol., 9(2), 3.
  93. Chiang, W.L., Chiou, D.J., Chen, C.W., Tang, J.P., Hsu, W.K. and Liu, T.Y. (2010), "Detecting the sensitivity of structural damage based on the Hilbert-Huang transform approach", Eng. Comput., 27(7), 799-818. https://doi.org/10.1108/02644401011073665.
  94. Chiou, D.J., Hsu, W.K., Chen, C.W., Hsieh, C.M., Tang, J.P. and Chiang, W.L. (2011), "Applications of Hilbert-Huang transform to structural damage detection", Struct. Eng. Mech., 39(1), 1-20. https://doi.org/10.12989/sem.2011.39.1.001.
  95. Dong, F., Xu, W., Wu, Z. and Hou, J. (2023), "Finite element computer simulation of twinning caused by plastic deformation of sheet metal", Steel Compos. Struct., 47(5), 601. https://doi.org/10.12989/scs.2023.47.5.601.
  96. Fard, K.M. and Mahmoudi, M. (2023), "Energy absorption optimization on a sandwich panel with lattice core under the low-velocity impact", Steel Compos. Struct., 46(4), 525-538. https://doi.org/10.12989/scs.2023.46.4.525.
  97. Ferraioli, M., Biagio, L., Angelo, L., Frattolillo, C. and De Matteis, G. (2023), "Seismic retrofit of a steelreinforced concrete hospital building using continuous energy-dissipative steel columns", Steel Compos. Struct., 47(4), 467-488. https://doi.org/10.12989/scs.2023.47.4.467.
  98. Foroutan, K. and Dai, L. (2023), "Nonlinear vibration and primary resonance of multilayer functionally graded shallow shells with porous core", Steel Compos. Struct., 48(3), 335. https://doi.org/10.12989/scs.2023.48.3.335.
  99. Gholizadeh, S., Milany, A. and Hasancebi, O. (2023), "Seismic optimization and performance assessment of special steel moment-resisting frames considering nonlinear soil-structure interaction", Steel Compos. Struct., 47(3), 339. https://doi.org/10.12989/scs.2023.47.3.339.
  100. Han, S.W., Cho, S.I., Kim, T. and Lee, K. (2023), "Moment ratio considering composite beam action for steel special moment frames", Steel Compos. Struct., 47(4), 489. https://doi.org/10.12989/scs.2023.47.4.489.
  101. He, B., Wen, S., Feng, Y., Jiang, L. and Zhoud, W. (2023a), "Reliability of mortar filling layer void length in in-service ballastless track-bridge system of HSR", Steel Compos. Struct., 47(1), 91-102. https://doi.org/10.12989/scs.2023.47.1.091.
  102. He, J., Zhang, X., Gong, H., Ali, H.E. and Ali, E. (2023b), "Levy-type solution for analysis of a magnetoelectro-elastic panel", Steel Compos. Struct., 46(6), 719. https://doi.org/10.12989/scs.2023.46.6.719.
  103. He, X., Yam, M.C., Ke, K., Zhou, X., Zhang, H. and Gu, Z. (2023c), "Behaviour insights on damage-control composite beam-to-beam connections with replaceable elements", Steel Compos. Struct., 46(6), 773. https://doi.org/10.12989/scs.2023.46.6.773.
  104. Hong, T.T., Thai, D.K. and Kim, S.E. (2023), "An evaluation system for determining the stress redistribution of a steel cable-stayed bridge due to cable stress relaxation at various temperatures", Steel Compos. Struct., 46(6), 805. https://doi.org/10.12989/scs.2023.46.6.805.
  105. Hsiao, F.H. and Hwang, J.D. (2003), "Robustness design of fuzzy controllers for nonlinear interconnected systems", Proceedings of the SICE Annual Conference Program and Abstracts SICE Annual Conference 2003, 34-34.
  106. Hsiao, F.H., Hwang, J.D. and Chen, C.W. (2004), "Decentralized fuzzy control for nonlinear multiple timedelay large-scale systems", Proceedings of the SICE 2004 Annual Conference, 3, 2806-2810.
  107. Hsiao, F.H., Chen, C.W., Liang, Y.W., Xu, S.D. and Chiang, W.L. (2005a), "TS fuzzy controllers for nonlinear interconnected systems with multiple time delays", IEEE Trans. Circuit. Syst. I: Regular Papers, 52(9), 1883-1893. https://doi.org/10.1109/TCSI.2005.852492.
  108. Hsiao, F.H., Chen, C.W., Wu, Y.H. and Chiang, W.L. (2005b), "Fuzzy controllers for nonlinear interconnected TMD systems with external force", J. Chin. Inst. Eng., 28(1), 175-181. https://doi.org/10.1080/02533839.2005.9670984.
  109. Hsiao, F.H., Chiang, W.L. and Chen, C.W. (2005c). Fuzzy control for nonlinear systems via neural-networkbased approach", Int. J. Comput. Meth. Eng. Sci. Mech., 6(3), 145-152. https://doi.org/10.1080/15502280590923612.
  110. Hsiao, F.H., Chiang, W.L., Chen, C.W., Xu, S.D. and Wu, S.L. (2005d), "Application and robustness design of fuzzy controller for resonant and chaotic systems with external disturbance", Int. J. Uncertain., Fuzz. Knowl. Based Syst., 13(3), 281-295. https://doi.org/10.1142/S0218488505003461.
  111. Hsiao, F.H., Hwang, J.D., Chen, C.W. and Tsai, Z.R. (2005e), "Robust stabilization of nonlinear multiple time-delay large-scale systems via decentralized fuzzy control", IEEE Trans. Fuzzy Syst., 13(1), 152-163. https://doi.org/10.1109/TFUZZ.2004.836067.
  112. Hsieh, T.Y., Wang, M.H., Chen, C.W., Chen, C.Y., Yu, S.E., Yang, H.C. and Chen, T.H. (2006), "A new viewpoint of s-curve regression model and its application to construction management", Int. J. Artif. Intel. Tool., 15(2), 131-142. https://doi.org/10.1142/S021821300600259X.
  113. Hsieh, T.Y., Wang, M.H.L. and Chen, C.W. (2004), "A case study of S-curve regression method to project control of construction management via TS fuzzy model", J. Marine Sci. Technol., 12(3), 10.
  114. Hsu, W.K., Huang, P.C., Chang, C.C., Chen, C.W., Hung, D.M. and Chiang, W.L. (2011), "An integrated flood risk assessment model for property insurance industry in Taiwan", Nat. Hazard., 58, 1295-1309. https://doi.org/10.1007/s11069-011-9732-9.
  115. Hsu, W.K., Tseng, C.P., Chiang, W.L. and Chen, C.W. (2012), "Risk and uncertainty analysis in the planning stages of a risk decision-making process", Nat. Hazard., 61, 1355-1365. https://doi.org/10.1007/s11069-011-0032-1.
  116. Hsu, M.H., Su, K.W., Chang, C.J., Chen, C.Y., Lai, C.Y., Hunag, A. and Chen, C.W. (2013a), "Routing protocol performance evaluation in wireless Ad hoc network", Inform. Technol. J., 12(22), 6595.
  117. Hsu, W.K., Chiang, W.L. and Chen, C.W. (2013b), "Earthquake risk assessment and optimal risk management strategies for hi-tech fabs in Taiwan", Nat. Hazard., 65, 2063-2076. https://doi.org/10.1007/s11069-012-0462-4.
  118. Hsu, W.K., Chiang, W.L., Xue, Q., Hung, D.M., Huang, P.C., Chen, C.W. and Tsai, C.H. (2013c), "A probabilistic approach for earthquake risk assessment based on an engineering insurance portfolio", Nat. Hazard., 65, 1559-1571. https://doi.org/10.1007/s11069-012-0425-9.
  119. Hsu, W.K., Chiou, D.J., Chen, C.W., Liu, M.Y., Chiang, W.L. and Huang, P.C. (2014), "A case study of damage detection in four-bays steel structures using the HHT approach", Smart Struct. Syst., 14(4), 595-615. https://doi.org/10.12989/sss.2014.14.4.595.
  120. Huang, C.F., Wang, M.H. and Chen, C.W. (2007), "Managing target cash balance in construction firms using novel fuzzy regression approach", Advanced Intelligent Computing Theories and Applications. With Aspects of Artificial Intelligence: Third International Conference on Intelligent Computing, ICIC 2007, Qingdao, China, August. https://doi.org/10.1007/978-3-540-74205-0_74.
  121. Im, C.R., Kim, S., Yang, K.H., Mun, J.H., Oh, J.H. and Sim, J.I. (2023), "Cyclic loading test for concretefilled hollow PC column produced using various inner molds", Steel Compos. Struct., 46(6), 793. https://doi.org/10.12989/scs.2023.46.6.793.
  122. Jafari, N. and Azhari, M. (2023), "Nonlinear free vibration analysis of moderately thick viscoelastic plates with various geometrical properties", Steel Compos. Struct., 48(3), 293-303. https://doi.org/10.12989/scs.2023.48.3.293.
  123. Jansukpum, K. and Kettem, S. (2015), "Applying innovation resistance theory to understand consumer resistance of using online travel in Thailand", Proceedings of the 2015 14th International Symposium. https://doi.org/10.4156/AISS.vol4.issue22.7.
  124. Karalar, M., Ozturk, H. and Ozkilic, Y.O. (2023), "Experimental and numerical investigation on flexural response of reinforced rubberized concrete beams using waste tire rubber", Steel Compos. Struct., 48(1), 43-57. https://doi.org/10.12989/scs.2023.48.1.043.
  125. Ke, X., Wei, H., Yang, L. and An, J. (2023), "Seismic performance and damage evaluation of concreteencased CFST composite columns subjected to different loading systems", Steel Compos. Struct., 47(1), 121. https://doi.org/10.12989/scs.2023.47.1.121.
  126. Khosravikhor, A., Gholhaki, M., Rezaifar, O. and Pachideh, G. (2023), "Effect of Ni-Ti shape memory alloy on ductility and response modification factor of SPSW systems", Steel Compos. Struct., 48(3), 353. https://doi.org/10.12989/scs.2023.48.3.353.
  127. Kontoni, D.P.N., Ghamari, A. and Thongchom, C. (2023), "Experimental and numerical study of a steel plate-based damper for improving the behavior of concentrically braced frames", Steel Compos. Struct., 47(2), 185-201. https://doi.org/10.12989/scs.2023.47.2.185.
  128. Kuan, F.Y., Ho, Y.P., Chen, W.I. and Chen, C.W. (2012a), "The impact of mood state of information service on purchase intention: A perspective of heuristics", Adv. Inform. Sci. Serv. Sci., 4(17).
  129. Kuan, F.Y., Ho, Y.P., Lu, Z. and Chen, C.W. (2012b), "The Consumers' heuristics effects of E-commerce's price promotion on perceived value", Adv. Inform. Sci. Serv. Sci., 4(20).
  130. Kuan, F.Y., Ho, Y.P., Wang, R.Y. and Chen, C.W. (2013), "Using RPC Block Adjustment models for the accuracy of environmental research, cartography and geomarketing: A new concept of cartography", Stochast. Environ. Res. Risk Assess., 27, 1315-1331. https://doi.org/10.1007/s00477-012-0668-8.
  131. Kuo, H.M., Chen, C.W. and Hsu, C.H. (2009), "A study of information and aiding interface design in B2C web sites", Proceedings of the 2009 IEEE International Conference on Industrial Engineering and Engineering Management, 852-855. https://doi.org/10.1109/IEEM.2009.5372897.
  132. Kuo, H.M., Chen, C.W. and Chen, C.W. (2010a), "A behavioral model of the elderly Internet consumer: a case study", Int. J. Innov. Comput., Inform. Control, 6(8), 3507-3518.
  133. Kuo, H.M., Chen, C.W. and Chen, C.W. (2010b), "A study of consumer behavior model on auction websites", ICIC Expr. Lett., 4(1), 65-70.
  134. Kuo, H.M., Chen, C.W., Hsu, C.H. and Chen, C.W. (2010c), "An observation of online auction difficulties for customers", Int. J. Res. Surveys, 4(3).
  135. Kuo, H.M. and Chen, C.W. (2011a), "Application of quality function deployment to improve the quality of Internet shopping website interface design", Int. J. Innov. Comput., Inform. Control, 7(1), 253-268.
  136. Kuo, H.M., Chen, C.W. and Chen, C.W. (2011b), "A study of merchandise information and interface design on B2C websites", J. Marine Sci. Technol., 19(1), 3. https://doi.org/10.51400/2709-6998.2133 
  137. Kuo, H.M. and Chen, C.W. (2012a), "Retracted: A novel viewpoint on information and interface design for auction web sites", Human Fact. Ergonom. Manuf. Serv. Indus., 22(4), 287-295. https://doi.org/10.1002/hfm.20274.
  138. Kuo, H.M., Chen, C.W. and Hsu, C.H. (2012b), "Retracted: A study of a B2C supporting interface design system for the elderly", Human Fact. Ergonom. Manuf. Serv. Indus., 22(6), 528-540. https://doi.org/10.1002/hfm.20297.
  139. Lee, W.I., Chen, C.W. and Wu, C.H. (2010), "Relationship between quality of medical treatment and customer satisfaction-a case study in dental clinic association", Int. J. Innov. Comput., Inform. Control, 6(4), 1805-1822.
  140. Lee, W.I., Chen, C.W., Chen, K.H., Chen, T.H. and Liu, C.C. (2012a), "A comparative study on the forecast of fresh food sales using logistic regression, moving average and BPNN methods", J. Marine Sci. Technol., 20(2), 4. https://doi.org/10.51400/2709-6998.1832
  141. Lee, W.I., Chiu, Y.T.H., Liu, C.C. and Chen, C.W. (2012b), "Self-service technologies: A review of extant knowledge and research agenda", Adv. Inform. Sci. Serv. Sci., 4(20).
  142. Li, G., Hou, C., Shen, L. and Hou, C.C. (2023a), "Lateral impact behaviour of concrete-filled steel tubes with localised pitting corrosion", Steel Compos. Struct., 47(5), 615. https://doi.org/10.12989/scs.2023.47.5.615.
  143. Li, Y.P., She, G.L., Gan, L.L. and Liu, H.B. (2023b), "Nonlinear thermal post-buckling analysis of graphene platelets reinforced metal foams plates with initial geometrical imperfection", Steel Compos. Struct., 46(5), 649. https://doi.org/10.12989/scs.2023.46.5.649.
  144. Lin, S.G., Tseng, C.P., Chiang, W.L., Tsai, C.H. and Chen, C.W. (2006), "Modelling ionospheric effects with multiple reference stations for gps satellite surveying", Proceedings of the 17th IASTED International Conference on Modelling and Simulation, ACTA PRESS ANAHEIM, Anaheim, 68-73.
  145. Lin, M.L. (2008a), "Monitoring drought dynamics in the ejin oasis using drought indices from modis data", IGARSS 2008-2008 IEEE International Geoscience and Remote Sensing Symposium, 4, IV-834.
  146. Lin, M.L. (2008b), "A gis-based local spatial autocorrelation for drought risk assessment in arid and semiarid environments: a case study in Ejin oasis, western China", IGARSS 2008-2008 IEEE International Geoscience and Remote Sensing Symposium, 4, IV-830. https://doi.org/10.1109/IGARSS.2008.4779851.
  147. Lin, M.L. (2009a), "Using MODIS-based vegetation and moisture indices for oasis landscape monitoring in an arid environment", 2009 IEEE International Geoscience and Remote Sensing Symposium, 4, IV-338. https://doi.org/10.1109/IGARSS.2009.5417382.
  148. Lin, M.L. (2009b), "Fuzzy model-based assessment and monitoring of desertification using MODIS satellite imagery", Eng. Comput., 26(7), 745-760. https://doi.org/10.1108/02644400910985152.
  149. Lin, C.L., Wang, J.F., Chen, C.Y., Chen, C.W. and Yen, C.W. (2009), "Improving the generalization performance of RBF neural networks using a linear regression technique", Exp. Syst. Appl., 36(10), 12049-12053. https://doi.org/10.1016/j.eswa.2009.03.012.
  150. Lin, M.L. and Chen, C.W. (2010), "Application of fuzzy models for the monitoring of ecologically sensitive ecosystems in a dynamic semi-arid landscape from satellite imagery", Eng. Comput., 27(1), 5-19. https://doi.org/10.1108/02644401011008504.
  151. Lin, M.L. and Chen, C.W. (2011), "Using GIS-based spatial geocomputation from remotely sensed data for drought risk-sensitive assessment", Int. J. Innov. Comput., Inform. Control, 7(2), 657-668.
  152. Lin, M.L., (2011), "Spatial filtering analysis for quick drought assessment using MODIS images to detect drought affected areas", 2011 IEEE International Geoscience and Remote Sensing Symposium, 767-770. https://doi.org/10.1109/IGARSS.2011.6049243.
  153. Lin, J.W., Chen, C.W. and Chung, S.H. (2012a), "Modeling and assessment of bridge structure for seismic hazard prevention", Nat. Hazard., 61, 1115-1126. https://doi.org/10.1007/s11069-011-9969-3.
  154. Lin, J.W., Chen, C.W. and Hsu, T.C. (2012b), "Fuzzy statistical refinement for the forecasting of tenders for roadway construction", J. Marine Sci. Technol., 20(4), 9. https://doi.org/10.6119/JMST-011-0318-1.
  155. Lin, J.W., Chen, C.W. and Peng, C.Y. (2012c), "Kalman filter decision systems for debris flow hazard assessment", Nat. Hazard., 60, 1255-1266. https://doi.org/10.1007/s11069-011-9907-4.
  156. Lin, J.W., Chen, C.W. and Peng, C.Y. (2012d), "Potential hazard analysis and risk assessment of debris flow by fuzzy modeling", Nat. Hazard., 64, 273-282. https://doi.org/10.1007/s11069-012-0236-z.
  157. Lin, C.W., Chen, C.W., Hsu, W.K., Chen, C.Y., Tsai, C.H., Hung, Y.P. and Chiang, W.L. (2013a), "Application of a feature-based approach to debris flow detection by numerical simulation", Nat. Hazard., 67, 783-796. https://doi.org/10.1007/s11069-013-0605-2.
  158. Lin, C.W., Hung, Y.P., Hsu, W.K., Chiang, W.L. and Chen, C.W. (2013b), "The construction of a highresolution visual monitoring for hazard analysis", Nat. Hazard., 65, 1285-1292. https://doi.org/10.1007/s11069-012-0409-9.
  159. Lin, J.W., Chen, C.W. and Hsu, T.C. (2013c), "A novel regression prediction model for structural engineering applications", Struct. Eng. Mech., 45(5), 693-702. https://doi.org/10.12989/sem.2013.45.5.693.
  160. Lin, C.W., Chen, K.W., Chen, S.C., Chen, C.W. and Hung, Y.P. (2015), "Large-area, multilayered, and highresolution visual monitoring using a dual-camera system", ACM Trans. Multimedia Comput., Commun. Appl. (TOMM), 11(2), 1-23. https://doi.org/10.1145/2645862.
  161. Liu, K.F.R., Liang, H.H., Yeh, K. and Chen, C.W. (2009), "A qualitative decision support for environmental impact assessment using fuzzy logic", J. Environ. Inform., 13(2). https://doi.rorg/10.3808/jei.200900144.
  162. Liu, K.F.R., Chen, J.S., Liang, H.H., Chen, C.W. and Shen, Y.S. (2010), "combining fuzzy logic and data miningto predict the result of an EIA review", Int. J. Environ. Ecolog. Eng., 4(12), 628-632.
  163. Liu, K.F.R., Hsu, C.Y., Yeh, K. and Chen, C.W. (2011a), "Hierarchical analytic network process and its application in environmental impact evaluation", Civil Eng. Environ. Syst., 28(1), 1-18. https://doi.org/10.1080/10286600903215078.
  164. Liu, K.F.R., Yeh, K., Chen, C.W. and Liang, H.H. (2011b), "Health Risk Assessment for Sewer Workers using Bayesian Belief Networks", Int. J. Med. Hlth. Sci., 5(9), 383-387.
  165. Liu, K.F.R., Ko, C.Y., Fan, C. and Chen, C.W. (2012a), "Combining risk assessment, life cycle assessment, and multi-criteria decision analysis to estimate environmental aspects in environmental management system", Int. J. Life Cycle Assess., 17, 845-862. https://doi.org/10.1007/s11367-012-0407-x.
  166. Liu, K.F.R., Liang, H.H., Chen, C.W., Chen, J.S. and Shen, Y.S. (2012b), "Combining scientific facts and significance criteria to predict the result of an environmental impact assessment review", J. Environ. Inform., 19(2). https://doi.org/10.3808/jei.201200212.
  167. Liu, K.F.R., Lu, C.F., Chen, C.W. and Shen, Y.S. (2012c), "Applying Bayesian belief networks to health risk assessment", Stochast. Environ. Res. Risk Assess., 26, 451-465. https://doi.org/10.1007/s00477-011-0470-z.
  168. Liu, C.C., Chen, Y.Y. and Chen, C.W. (2013a), "Application of multi-scale remote sensing imagery to detection and hazard analysis", Nat. Hazard., 65, 2241-2252. https://doi.org/10.1007/s11069-012-0472-2.
  169. Liu, C.C., Kuo, Y.C. and Chen, C.W. (2013b), "Emergency responses to natural disasters using Formosat-2 high-spatiotemporal-resolution imagery: forest fires", Nat. Hazard., 66, 1037-1057. https://doi.org/10.1007/s11069-012-0535-4.
  170. Liu, K.F.R., Ko, C.Y., Fan, C. and Chen, C.W. (2013c), "Incorporating the LCIA concept into fuzzy risk assessment as a tool for environmental impact assessment", Stochast. Environ. Res. Risk Assess., 27, 849-866. https://doi.org/10.1007/s00477-012-0621-x.
  171. Liu, K.F.R., Chen, C.W. and Shen, Y.S. (2013d), "Using Bayesian belief networks to support health risk assessment for sewer workers", Int. J. Environ. Sci. Technol., 10, 385-394. https://doi.org/10.1007/s13762-012-0136-5.
  172. Liu, K.F.R., Kuo, J.Y., Yeh, K., Chen, C.W., Liang, H.H. and Sun, Y.H. (2015), "Using fuzzy logic to generate conditional probabilities in Bayesian belief networks: A case study of ecological assessment", Int. J. Environ. Sci. Technol., 12, 871-884. https://doi.org/10.1007/s13762-013-0459-x.
  173. Liu, J. and Qiu, C. (2023a), "Cyclic behavior of self-centering braces utilizing energy absorbing steel plate clusters", Steel Compos. Struct., 47(4), 523-537. https://doi.org/10.12989/scs.2023.47.4.523.
  174. Liu, M., Bi, S., Shao, S. and Babaei, H. (2023b), "Nonlinear vibration of FG-CNTRC curved pipes with temperature-dependent properties", Steel Compos. Struct., 46(4), 553. https://doi.org/10.12989/scs.2023.46.4.553.
  175. Liu, S., Li, J., Aghajanirefah, H., Khishe, M., Khishe, A., Mahmoodzadeh, A. and Ibrahim, B.F. (2023c), "Reinforced concrete structures with damped seismic buckling-restrained bracing optimization using multi-objective evolutionary niching ChOA", Steel Compos. Struct., 47(2), 147. https://doi.org/10.12989/scs.2023.47.2.147.
  176. Lu, L.T., Chiang, W.L., Tang, J.P., Liu, M.Y. and Chen, C.W. (2003), "Active control for a benchmark building under wind excitations", J. Wind Eng. Indus. Aerodyn., 91(4), 469-493. https://doi.org/10.1016/S0167-6105(02)00431-2.
  177. Lv, H., Liu, F., Gao, X., Zhou, T. and Yuan, X. (2023), "Influence of loading and unloading of hydraulic support on the caving property of top coal", Steel Compos. Struct., 48(1), 103-111. https://doi.org/10.12989/scs.2023.48.1.103.
  178. Lyu, J., Zhu, E., Li, R., Sun, B. and Wang, Z. (2023a), "Study on the fire resistance of castellated composite beams with ortho hexagonal holes and different beam-end constraints", Steel Compos. Struct., 46(4), 539. https://doi.org/10.12989/scs.2023.46.4.539.
  179. Lyu, Y.F., Li, G.Q., Cao, K., Zhai, S.Y., Kong, D.Y., Xue, X.Y. and Li, H. (2023b), "Lateral stiffness of corner-supported steel modular frame with splice connection", Steel Compos. Struct., 48(3), 321. https://doi.org/10.12989/scs.2023.48.3.321.
  180. Lyu, Y.F., (2023), "Lateral stiffness of corner-supported steel modular frame with splice connection", Steel Compos. Struct., 48(3), 321. https://doi.org/10.12989/scs.2023.48.3.321.
  181. Mahmoud, S.R., Ghandourah, E.I., Algarni, A.H., Balubaid, M.A., Tounsi, A., Tounsi, A. and Bourada, F. (2023), "Stability investigation of symmetrically porous advanced composites plates via a novel hyperbolic RPT br", Steel Compos. Struct., 46(4), 471-483. https://doi.org/10.12989/scs.2023.46.4.471.
  182. Mohamed, N., Mohamed, S.A., Abdelrhmaan, A.A. and Eltaher, M.A. (2023), "Nonlinear stability of bioinspired composite beams with higher order shear theory", Steel Compos. Struct., 46(6), 759. https://doi.org/10.12989/scs.2023.46.6.759.
  183. Mou, B., Zhang, A. and Pan, W. (2023), "Unequal depth beam to column connection joint", Steel Compos. Struct., 46(6), 823. https://doi.org/10.12989/scs.2023.46.6.823.
  184. Nguyen, M.N., (2023), "Topology optimization of Reissner-Mindlin plates using multi-material discrete shear gap method", Steel Compos. Struct., 47(3), 365-374. https://doi.org/10.12989/scs.2023.47.3.365.
  185. Noureldin, M., Gharagoz, M.M. and Kim, J. (2023), "Seismic retrofit of steel structures with re-centering friction devices using genetic algorithm and artificial neural network", Steel Compos. Struct., 47(2), 167-184. https://doi.org/10.12989/scs.2023.47.2.167.
  186. Pakizeh, M.R., Parastesh, H., Hajirasouliha, I. and Farahbod, F. (2023), "Seismic performance of CFS shear wall systems filled with polystyrene lightweight concrete: Experimental investigation and design methodology", Steel Compos. Struct., 46(4), 497. https://doi.org/10.12989/scs.2023.46.4.497.
  187. Pham, V.T., (2023), "A novel method for vehicle load detection in cable-stayed bridge using graph neural network", Steel Compos. Struct., 46(6), 731. https://doi.org/10.12989/scs.2023.46.6.731.
  188. Prates, L.M.S., (2023), "Modelling headed stud shear connectors of steel-concrete pushout tests with PCHCS and concrete topping", Steel Compos. Struct., 46(4), 451. https://doi.org/10.12989/scs.2023.46.4.451.
  189. Qiao, W., Wang, Y., Li, R., Wang, D. and Zhang, H. (2023), "Research on axial bearing capacity of cold-formed thin-walled steel built-up column with 12-limb-section", Steel Compos. Struct., 47(3), 437. https://doi.org/10.12989/scs.2023.47.3.437.
  190. Qin, X. and Yang, G. (2023), "Hysteretic model for stud connection in composite structures", Steel Compos. Struct., 47(5), 587. https://doi.org/10.12989/scs.2023.47.5.587.
  191. Rahmdel, J.M. and Shafei, E. (2023), "Strain interaction of steel stirrup and EB-FRP web strip in shear-strengthened semi-deep concrete beams", Steel Compos. Struct., 47(3), 383. https://doi.org/10.12989/scs.2023.47.3.383.
  192. Rasti, S., Showkati, H., Aghbashi, B.M., Ozani, S.N. and Zirakian, T. (2023), "Experimental behavior assessment of short, randomly-oriented glass-fiber composite pipes", Steel Compos. Struct., 47(6), 679-691. https://doi.org/10.12989/scs.2023.47.6.679.
  193. Setiawan, G.H. and Suryawan, I.K.D. (2020), "Analisis Kinerja Aplikasi Pengamatan Kondisi Lalu Lintas Berdasarkan Tingkat Akurasi", Seminar Nasional Teknologi Komputer & Sains, 1(1), 579-583. https://doi.org/10.4156/aiss.vol3.issue6.6.
  194. Shen, C.W., Cheng, M.J., Chen, C.W., Tsai, F.M. and Cheng, Y.C. (2011), "A fuzzy AHP-based fault diagnosis for semiconductor lithography process", Int. J. Innov. Comput., Inform. Control, 7(2), 805-816.
  195. Shih, B.Y., Chen, C.W., Chen, C.Y. and Kuo, J.W. (2012a), "A robust license plate recognition methodology by applying hybrid artificial techniques", Int. J. Innov. Comput., Inform. Control, 8(10A), 6777-6785.
  196. Shih, B.Y., Chen, C.W., Chen, C.Y. and Lo, T.W. (2012b), "Merged search algorithms for radio frequency identification anticollision", Math. Prob. Eng., 2012, 609035. https://doi.org/10.1155/2012/609035.
  197. Shih, B.Y. (2010), "A preliminary study on design and development of template-based for license plate recognition system applying artificial coordinates auxiliary techniques", 2010 IEEE International Conference, 80-83. https://doi.org/10.1109/IEEM.2010.5674430.
  198. Shih, B.Y., Liang, Y.D., Chen, C.Y. and Chen, C.W. (2012), "NXT information and control on test dimensionality using Kolb's innovative learning cycle", 2012 International Symposium on Information Technologies in Medicine and Education, 1, 194-198. https://doi.org/10.1109/ITiME.2012.6291279.
  199. Song, C., (2023), "Application of computer methods for the effects of nanoparticles on the frequency of the concrete beams experimentally and numerically", Steel Compos. Struct., 48(1), 19-25. https://doi.org/10.12989/scs.2023.48.1.019.
  200. Su, D.T., Lo, D.C., Chen, C.W. and Huang, Y.C. (2013), "The integration of nautical charts to reconstruct 3D harbor area models and apply assisted navigation", Nat. Hazard., 66, 1135-1151. https://doi.org/10.1007/s11069-012-0516-7.
  201. Su, R., Li, X. and Li, Z. (2023), "Axial behavior of square CFST encased seawater sea-sand concrete filled PVC/GFRP tube columns", Steel Compos. Struct., 47(6), 781. https://doi.org/10.12989/scs.2023.47.6.781.
  202. Su, T.J., Cheng, J.C., Huang, M.Y., Lin, T.H. and Chen, C.W. (2011), "Applications of cellular neural networks to noise cancelation in gray images based on adaptive particle-swarm optimization", Circuit., Syst. Signal Pr., 30, 1131-1148. https://doi.org/10.1007/s00034-011-9269-x.
  203. Sui, L., Wu, H., Tao, M., Jia, Z. and Zhou, T. (2023), "Seismic performance evaluation of steel moment frames with self-centering energy-dissipating coupled wall panels", Steel Compos. Struct., 47(5), 663-677. https://doi.org/10.12989/scs.2023.47.5.663.
  204. Tagrara, S.H., (2023), "Mechanical and thermal stability investigation of functionally graded plates resting on visco-Pasternak foundation", Steel Compos. Struct., 46(6), 839. https://doi.org/10.12989/scs.2023.46.6.839.
  205. Taheri-Behrooz, F. and Torabia, M. (2023), "Low-velocity impact performance of the carbon/epoxy plates exposed to the cyclic temperature", Steel Compos. Struct., 48(3), 305. https://doi.org/10.12989/scs.2023.48.3.305.
  206. Tan, Z., (2023), "A novel design method for improving collapse resistances of multi-story steel frames with unequal spans using steel braces", Steel Compos. Struct., 47(2), 253. https://doi.org/10.12989/scs.2023.47.2.253.
  207. Tharwan, M.Y., Daikh, A.A., Assie, A.E., Alnujaie, A. and Eltaher, M.A. (2023), "Refined quasi-3D shear deformation theory for buckling analysis of functionally graded curved nanobeam rested on Winkler/Pasternak/Kerr foundation", Mech. Bas. Des. Struct. Mach., 1-24. https://doi.org/10.12989/scs.2023.47.5.633.
  208. Tsai, C.H., Chen, C.W., Chiang, W.L. and Lin, M.L. (2008), "Application of geographic information system to the allocation of disaster shelters via fuzzy models", Eng. Comput., 25(1), 86-100. https://doi.org/10.1108/02644400810841431.
  209. Tsai, C.H. and Chen, C.W. (2010), "An earthquake disaster management mechanism based on risk assessment information for the tourism industry-a case study from the island of Taiwan", Tour. Manage., 31(4), 470-481. https://doi.org/10.1016/j.tourman.2009.05.008.
  210. Tsai, C.H., Huang, P.H., Chou, W.C., Shih, C.H., Chen, C.Y., Shih, B.Y., ... & Chung, P.Y. (2010), "Sonarbased obstacle avoidance using a path correction method for autonomous control of a biped robot for the learning stratification and performance", Proceedings of the 2010 IEEE International Conference, 532-536. https://doi.org/10.1109/IEEM.2010.5674501.
  211. Tsai, C.H. and Chen, C.W. (2011a), "Development of a mechanism for typhoon-and flood-risk assessment and disaster management in the hotel industry-A case study of the Hualien area", Scandinav. J. Hospital. Tourism, 11(3), 324-341. https://doi.org/10.1080/15022250.2011.601929.
  212. Tsai, C.H. and Chen, C.W. (2011b), "The establishment of a rapid natural disaster risk assessment model for the tourism industry", Tour. Manage., 32(1), 158-171. https://doi.org/10.1016/j.tourman.2010.05.015.
  213. Tsai, P.W. and Chen, C.W. (2014), "A novel criterion for nonlinear time-delay systems using LMI fuzzy Lyapunov method", Appl. Soft Comput., 25, 461-472. https://doi.org/10.1016/j.asoc.2014.08.045.
  214. Tsai, P.W., Alsaedi, A., Hayat, T. and Chen, C.W. (2016), "A novel control algorithm for interaction between surface waves and a permeable floating structure", China Ocean Eng., 30, 161-176. https://doi.org/10.1007/s13344-016-0009-7.
  215. Tseng, C.P. and Chen, C.W. (2012), "Natural disaster management mechanisms for probabilistic earthquake loss", Nat. Hazard., 60, 1055-1063. https://doi.org/10.1007/s11069-011-9889-2.
  216. Tseng, C.P., Chang, M.L. and Chen, C.W. (2012), "Retracted: Human factors of knowledge sharing intention among taiwanese enterprises: A preliminary study", Human Factor. Ergonom. Manuf. Serv. Indus., 22(4), 328-339. https://doi.org/10.1002/hfm.20507.
  217. Tseng, C.P., Chen, C.W. and Tu, Y.P. (2011), "A new viewpoint on risk control decision models for natural disasters", Nat. Hazard., 59, 1715-1733. https://doi.org/10.1007/s11069-011-9861-1.
  218. Tseng, C.P., Chen, C.W., Yeh, K. and Chiang, W.L. (2007), "Intelligent financial decision model of natural disasters risk control", Advanced Intelligent Computing Theories and Applications. With Aspects of Theoretical and Methodological Issues: Third International Conference on Intelligent Computing, ICIC 2007, Qingdao, China, August. https://doi.org/10.1007/978-3-540-74171-8_6.
  219. Tseng, C.P., Chiang, W.L., Hsu, W.K., Hung, D.M., Tsai, C.H. and Chen, C.W. (2006), "Default risk-based probabilistic decision model on natural disasters risk control", Proceedings of the 17th IASTED International Conference on Modelling and Simulation, 219-223.
  220. Tseng, C.P., (2006), "Optimum arrangement between natural disasters insurance and risk control", Proceedings of the 17th IASTED International Conference on Modelling and Simulation, 184-187.
  221. Wei, J., (2023), "Axial compressed UHPC plate-concrete filled steel tubular composite short columns, Part I: Bearing capacity", Steel Compos. Struct., 47(3), 405. https://doi.org/10.12989/scs.2023.47.3.405.
  222. Wen, C. and Yang, G. (2023), "Stud connection in composite structures: development with concrete age", Steel Compos. Struct., 47(6), 729-741. https://doi.org/10.12989/scs.2023.47.6.729.
  223. Wu, J., Wei, X. and Luo, X. (2023a), "Predicting drying shrinkage of steel reinforced concrete columns with enclosed section steels", Steel Compos. Struct., 47(4), 539. https://doi.org/10.12989/scs.2023.47.4.539.
  224. Wu, P., Li, D., Yu, F., Fang, Y., Xiang, G. and Li, Z. (2023b), "Experimental study on bearing capacity of PFCC column-RC beam joint reinforced with CST", Steel Compos. Struct., 47(1), 19. https://doi.org/10.12989/scs.2023.47.1.019.
  225. Wu, Y.L. and Chen, C.W. (2013), "Examining the learning experiences of science training among Taiwanese Aboriginal adolescents", J. Baltic Sci. Edu., 12(3), 312.
  226. Wu, Y.L. and Chen, C.W. (2013), "Examining the micropolitical literacy of science intern teachers in Taiwan", J. Baltic Sci. Edu., 12(4), 440.
  227. Wu, Y.L., Tsai, Y.L. and Chen, C.W. (2014), "Examining the experiences of career guidance, vocational self-concept, and self-perceived employability among science education majors in Taiwan", J. Baltic Sci. Edu., 13(2), 182.
  228. Xiamuxi, A., Liu, C. and Jierula, A. (2023), "Study of the longitudinal reinforcement in reinforced concrete-filled steel tube short column subjected to axial loading", Steel Compos. Struct., 47(6), 709. https://doi.org/10.12989/scs.2023.47.6.709.
  229. Xu, J.Q., She, G.L., Li, Y.P. and Gan, L.L. (2023), "Nonlinear resonances of nonlocal strain gradient nanoplates made of functionally graded materials considering geometric imperfection", Steel Compos. Struct., 47(6), 795. https://doi.org/10.12989/scs.2023.47.6.795.
  230. Yang, H.C. and Chen, C.W. (2012), "Potential hazard analysis from the viewpoint of flow measurement in large open-channel junctions", Nat. Hazard., 61, 803-813. https://doi.org/10.1007/s11069-011-0067-3.
  231. Yang, H.C.P. (2013), "Accuracy evaluation of a diagnostic test by detecting outliers and influential observations COE".
  232. Yang, H.C.P., Alex, K.H.C. and Chen, T.H. (2008a), "Evaluation of inference adequacy in cumulative logistic regression models: an empirical validation of ISW-ridge relationships", China Ocean Eng., 1, 5.
  233. Yang, H.C.P., Chen, C.Y., Chen, C.W. and Chen, T.H. (2008b), "Estimation on internal wave reflection in a two-layer fluid system by cumulative logistic regression model", J. Marine Sci. Technol., 16(1), 6.
  234. Yaylaci, M., Yaylaci, E.U., Ozdemir, M.E., Ozturk, S. and Sesli, H. (2023), "Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods", Steel Compos. Struct., 46(4), 565. https://doi.org/10.12989/scs.2023.46.4.565.
  235. Yeh, K., Chen, C.W. and Hsiung, T.K. (2007), "Fuzzy control for seismically excited bridges with sliding bearing isolation", Advanced Intelligent Computing Theories and Applications. With Aspects of Theoretical and Methodological Issues: Third International Conference on Intelligent Computing, ICIC 2007, Qingdao, China, August. https://doi.org/10.1007/978-3-540-74171-8_47.
  236. Yeh, K., Chen, C.W. and Chen, C.Y. (2008a), "NN robustness design of nonlinear structure systems", Proceedings of the 2008 SICE Annual Conference, 733-736. https://doi.org/10.1109/SICE.2008.4654752.
  237. Yeh, K., Chen, C.Y. and Chen, C.W. (2008b), "Robustness design of time-delay fuzzy systems using fuzzy Lyapunov method", Appl. Math. Comput., 205(2), 568-577. https://doi.org/10.1016/j.amc.2008.05.104.
  238. Yeh, K., Chen, C.W., Lin, S.H. and Chen, C.Y. (2009), "Stability analysis of time-delay fuzzy systems using fuzzy Lyapunov method", 2009 First Asian Conference on Intelligent Information and Database Systems, 243-248. https://doi.org/10.1109/ACIIDS.2009.85.
  239. Yeh, K. and Chen, C.W. (2010), "Stability analysis of interconnected fuzzy systems using the fuzzy Lyapunov method", Math. Prob. Eng., 2010, 734340. https://doi.org/10.1155/2010/734340.
  240. Yeh, K., Chen, C.W., Hsieh, C.M., Cheng, Y.C. and Hsu, K.T. (2013), "Fuzzy control for a permeable floating structure", 2013 Third International Conference on Intelligent System Design and Engineering Applications, 796-799. https://doi.org/10.1109/ISDEA.2012.189.
  241. Zaoui, F.Z., Ouinas, D., Tounsi, A., Achour, B., Olay, J.A.V. and Butt, T.A. (2023), "Mechanical behaviour analysis of FGM plates on elastic foundation using a new exponential-trigonometric HSDT", Steel Compos. Struct., 47(5), 551. https://doi.org/10.12989/scs.2023.47.5.551.
  242. Zhan, Y., (2023), "Effect of stud corrosion on stiffness in negative bending moment region of steel-concrete composite beam", Steel Compos. Struct., 48(1), 59. https://doi.org/10.12989/scs.2023.48.1.059.
  243. Zhang, Y., Zhao, Q., Han, Q. and Bohlooli, N. (2023), "Free vibration analysis of a laminated trapezoidal plate with GrF-PMC core and wavy CNT-reinforced face sheets", Steel Compos. Struct., 48(3), 275. https://doi.org/10.12989/scs.2023.48.3.275.
  244. Zhao, L., (2023), "Using three-dimensional theory of elasticity for vibration analysis of laminated sectorial plates", Steel Compos. Struct., 48(1), 1-17. https://doi.org/10.12989/scs.2023.48.1.001.
  245. Zou, X., Yan, G., Wu, W., Yang, W., Shi, W. and Sun, Y. (2023), "Effect of thickness stretching and multi-field loading on the results of sandwich piezoelectric/piezomagnetic MEMS", Steel Compos. Struct., 46(4), 485. https://doi.org/10.12989/scs.2023.46.4.485.