Bulletin of the Korea Photovoltaic Society (한국태양광발전학회지)

Korea Photovoltaic Society (한국태양광발전학회)
권호 표지

페로브스카이트/실리콘 탠덤 태양전지 기술동향과 리뷰

  • 최덕재 (한국과학기술연구원 차세대태양전지센터)
  • Published : 2025.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Green, M. A. et al. Solar Cell Efficiency Tables (Version 65). Progress in Photovoltaics: Research and Applications 33, 3-15 (2025). https://doi.org/10.1002/pip.v33.1
  2. Green, M. A. et al. Solar cell efficiency tables (Version 64). Progress in Photovoltaics: Research and Applications 32, 425-441 (2024). https://doi.org/10.1002/pip.v32.7
  3. Duan, L. et al. Stability challenges for the commercialization of perovskite-silicon tandem solar cells. Nat. Rev. Mater. 8, 261-281 (2023). https://doi.org/10.1038/s41578-022-00521-1
  4. Yu, Y. et al. Review of silicon recovery in the photovoltaic industry. Current Opinion in Green and Sustainable Chemistry 44, 100870 (2023). https://doi.org/10.1016/j.cogsc.2023.100870
  5. Green, M. A. et al. Solar Cell Efficiency Tables (Version 66). Progress in Photovoltaics: Research and Applications 33, 795-810 (2025). https://doi.org/10.1002/pip.v33.7
  6. Richter, A., Hermle, M. & Glunz, S. W. Reassessment of the limiting efficiency for crystalline silicon solar cells. IEEE J. Photovolt 3, 1184-1191 (2013). https://doi.org/10.1109/JPHOTOV.5503869
  7. Park, J. et al. Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature 616, 724-730 (2023). https://doi.org/10.1038/s41586-023-05825-y
  8. Chen, H. et al. Improved Charge Extraction in Inverted Perovskite Solar Cells with Dual-Site-Binding Ligands. Science 384, 6692 (2024) https://doi.org/10.1126/science.adm9474
  9. Duan, Y. et al. A Comprehensive Review of Organic Hole-Transporting Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells. Adv. Funct. Mater. 34, 2315604 (2024).
  10. Li, S. et al. High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics. Nature 635, 82-88 (2024). https://doi.org/10.1038/s41586-024-08103-7
  11. Liu, S. et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 632, 536-542 (2024). https://doi.org/10.1038/s41586-024-07723-3
  12. Mailoa, J. P. et al. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction. Appl. Phys. Lett. 106, (2015). https://doi.org/10.1063/1.4914179
  13. Futscher, M. H. & Ehrler, B. Efficiency Limit of Perovskite/Si Tandem Solar Cells. ACS Energy Lett. 1, 863-868 (2016). https://doi.org/10.1021/acsenergylett.6b00405
  14. Park, J. H. et al. Sub-cell characterization of two-terminal perovskite/silicon tandem solar cells. Cell. Rep. Phys. Sci. 3, 101076 (2022).
  15. Leijtens, T., Bush, K. A., Prasanna, R. & McGehee, M. D. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors. Nat. Energy 3, 828-838 (2018). https://doi.org/10.1038/s41560-018-0190-4
  16. Raza, E. & Ahmad, Z. Review on two-terminal and four-terminal crystalline-silicon/perovskite tandem solar cells; progress, challenges, and future perspectives. Energy Rep. 8, 5820-5851 (2022). https://doi.org/10.1016/j.egyr.2022.04.028
  17. Li, Z. et al. Cost Analysis of Perovskite Tandem Photovoltaics. Joule 2, 1559-1572 (2018). https://doi.org/10.1016/j.joule.2018.05.001
  18. Cordell, J. J., Woodhouse, M. & Warren, E. L. Technoeconomic analysis of perovskite/silicon tandem solar modules. Joule 9, 101781 (2025). https://doi.org/10.1016/j.joule.2024.10.013
  19. Park, I. J. et al. A Three-Terminal Monolithic Perovskite/Si Tandem Solar Cell Characterization Platform. Joule 3, 807-818 (2019). https://doi.org/10.1016/j.joule.2018.11.017
  20. Zhu, P. et al. Toward the Commercialization of Perovskite Solar Modules. Adv. Mater. 36, 2307357 (2024).
  21. Mcmeekin, D. P. et al. A Mixed-Cation Lead Mixed-Halide Perovskite Absorber for Tandem Solar Cells. Science 351, 6269 (2016) https://doi.org/10.1126/science.aad5845
  22. Jeong, M. et al. Stable Perovskite Solar Cells with Efficiency Exceeding 24.8% and 0.3-V Voltage Loss. Science 369, 6511 (2020) https://doi.org/10.1126/science.abb7167
  23. Bush, K. A. et al. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat. Energy 2, 17009 (2017).
  24. Chen, B. et al. Blade-Coated Perovskites on Textured Silicon for 26%-Efficient Monolithic Perovskite/Silicon Tandem Solar Cells. Joule 4, 850-864 (2020). https://doi.org/10.1016/j.joule.2020.01.008
  25. Wu, Y. et al. 27.6% Perovskite/c-Si Tandem Solar Cells Using Industrial Fabricated TOPCon Device. Adv. Energy Mater. 12, 2200821 (2022).
  26. Al-Ashouri, A. et al. Monolithic Perovskite/Silicon Tandem Solar Cell with >29% Efficiency by Enhanced Hole Extraction. Science 370, 6522 (2020) https://doi.org/10.1126/science.abd4016
  27. Tockhorn, P. et al. Nano-optical designs for high-efficiency monolithic perovskite-silicon tandem solar cells. Nat. Nanotechnol. 17, 1214-1221 (2022). https://doi.org/10.1038/s41565-022-01228-8
  28. Fang, Z., Yan, N. & Liu, S. Modulating preferred crystal orientation for efficient and stable perovskite solar cells-From progress to perspectives. InfoMat 4, e12369 (2022). https://doi.org/10.1002/inf2.v4.10
  29. He, A. et al. Unraveling the Impact of Bromine Incorporation on the Hybrid Perovskite Film Phase Evolution Mechanism by In Situ Characterization. Adv. Energy Mater. 13, 2300957 (2023).
  30. Li, Q. et al. Unveiling the surface-interface properties of perovskite crystals and pivotal regulation strategies. Nano Research 17, 3950-3981 (2024). https://doi.org/10.1007/s12274-023-6291-9
  31. Zhou, Y. et al. Composition-Tuned Wide Bandgap Perovskites: From Grain Engineering to Stability and Performance Improvement. Adv. Funct. Mater. 28, 1803130 (2018). https://doi.org/10.1002/adfm.v28.35
  32. Tan, H. et al. Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites. Nat. Commun. 9, 3100 (2018). https://doi.org/10.1038/s41467-018-05531-8
  33. He, Y. et al. Minimizing Open-Circuit Voltage Loss in Perovskite/Si Tandem Solar Cells via Exploring the Synergic Effect of Cations and Anions. Physica Status Solidi - Rapid Research Letters 15, 2100119 (2021). https://doi.org/10.1002/pssr.v15.12
  34. Yang, G. et al. Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells. Nat. Photonics 16, 588-594 (2022). https://doi.org/10.1038/s41566-022-01033-8
  35. Ren, N. et al. Multifunctional Additive CdAc2 for Efficient Perovskite-Based Solar Cells. Adv. Mater. 35, (2023). https://doi.org/10.1002/adma.v35.32
  36. Isikgor, F. H. et al. Concurrent cationic and anionic perovskite defect passivation enables 27.4% perovskite/silicon tandems with suppression of halide segregation. Joule 5, 1566-1586 (2021). https://doi.org/10.1016/j.joule.2021.05.013
  37. Wang, L. et al. Highly Efficient Monolithic Perovskite/TOPCon Silicon Tandem Solar Cells Enabled by "Halide Locking". Adv. Mater. 37, 2416150 (2025).
  38. Ye, T. et al. Molecular Bridge in Wide-Bandgap Perovskites for Efficient and Stable Perovskite/Silicon Tandem Solar Cells. Adv. Funct. Mater. 35, 2419391 (2025). https://doi.org/10.1002/adfm.v35.25
  39. Chen, B. et al. Grain Engineering for Perovskite/Silicon Monolithic Tandem Solar Cells with Efficiency of 25.4%. Joule 3, 177-190 (2019). https://doi.org/10.1016/j.joule.2018.10.003
  40. Kim, D. H. et al. Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS. Joule 3, 1734-1745 (2019). https://doi.org/10.1016/j.joule.2019.04.012
  41. Bush, K. A. et al. Compositional Engineering for Efficient Wide Band Gap Perovskites with Improved Stability to Photoinduced Phase Segregation. ACS Energy Lett. 3, 428-435 (2018). https://doi.org/10.1021/acsenergylett.7b01255
  42. Wang, S. et al. Suppressed recombination for monolithic inorganic perovskite/silicon tandem solar cells with an approximate efficiency of 23%. eScience 2, 339-346 (2022). https://doi.org/10.1016/j.esci.2022.04.001
  43. Liu, J. et al. Efficient and Stable Perovskite-Silicon Tandem Solar Cells through Contact Displacement by MgFx. Science 377, 302-306 (2022). https://doi.org/10.1126/science.abn8910
  44. Li, X. et al. Top-Down Dual-Interface Carrier Management for Highly Efficient and Stable Perovskite/Silicon Tandem Solar Cells. Nano-micro Lett. 17, 141 (2025).
  45. Liu, J. et al. Perovskite/silicon tandem solar cells with bilayer interface passivation. Nature 635, 596-603 (2024). https://doi.org/10.1038/s41586-024-07997-7
  46. Mariotti, S. et al. Interface Engineering for High-Performance, Triple-Halide Perovskite-Silicon Tandem Solar Cells. Science 381, 63-69 (2024). https://doi.org/10.1126/science.adf5872
  47. Pei, F. et al. Tailoring Perovskite/C60 Interface by Reactive Passivators for Stable Tandem Solar Cells. Adv. Funct. Mater. 34, (2023). https://doi.org/10.1002/adfm.v34.52
  48. Zhang, F. et al. Buried-Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon. Adv. Mater. 35, (2023). https://doi.org/10.1002/adma.v35.42
  49. Albrecht, S. et al. Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature. Energy Environ. Sci. 9, 81-88 (2016). https://doi.org/10.1039/C5EE02965A
  50. Werner, J. et al. Zinc tin oxide as high-temperature stable recombination layer for mesoscopic perovskite/silicon monolithic tandem solar cells. Appl. Phys. Lett. 109, 233902 (2016). https://doi.org/10.1063/1.4971361
  51. Aydin, E. et al. Enhanced optoelectronic coupling for perovskite/silicon tandem solar cells. Nature 623, 732-738 (2023). https://doi.org/10.1038/s41586-023-06667-4
  52. Zheng, J. et al. Large area efficient interface layer free monolithic perovskite/homo-junction-silicon tandem solar cell with over 20% efficiency. Energy Environ. Sci. 11, 2432-2443 (2018). https://doi.org/10.1039/C8EE00689J
  53. Shen, H. et al. In Situ Recombination Junction between P-Si and TiO2 Enables High-Efficiency Monolithic Perovskite/Si Tandem Cells. Sci. Adv. 4, 1-12 (2018).
  54. Wang, Y., Wang, Y., Gao, F. & Yang, D. Efficient Monolithic Perovskite/Silicon Tandem Photovoltaics. Energy and Environ. Mater. 7, e12639 (2024).
  55. Zheng, J. et al. Efficient monolithic perovskite-Si tandem solar cells enabled by an ultra-thin indium tin oxide interlayer. Energy Environ. Sci. 16, 1223-1233 (2023). https://doi.org/10.1039/D2EE04007G
  56. Werner, J. et al. Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2. J. Phys, Chem, Lett. 7, 161-166 (2016). https://doi.org/10.1021/acs.jpclett.5b02686
  57. Hyun, J. Y. et al. Perovskite/Silicon Tandem Solar Cells with a Voc of 1784 mV Based on an Industrially Feasible 25 cm2 TOPCon Silicon Cell. ACS Appl Energy Mater. 5, 5449-5456 (2022). https://doi.org/10.1021/acsaem.1c02796
  58. Hyun, J. et al. Efficient n-i-p monolithic perovskite/silicon tandem solar cells with tin oxide via a chemical bath deposition method. Energies 14, 7614 (2021). https://doi.org/10.3390/en14227614
  59. Sahli, F. et al. Fully textured monolithic perovskite/s ilicon tandem solar cells with 25.2% power conversion efficiency. Nat. Mater. 17, 820-826 (2018). https://doi.org/10.1038/s41563-018-0115-4
  60. Zheng, J. et al. Polycrystalline silicon tunnelling recombination layers for high-efficiency perovskite/tunnel oxide passivating contact tandem solar cells. Nat. Energy 8, 1250-1261 (2023). https://doi.org/10.1038/s41560-023-01382-w
  61. Mercaldo, L. V. et al. Monolithic perovskite/silicon-heterojunction tandem solar cells with nanocrystalline si/siox tunnel junction. Energies 14, 7684 (2021). https://doi.org/10.3390/en14227684
  62. Park, N. G. Perovskite Solar Cell: Research Direction for Next 10 Years. ACS Energy Lett. 4, 2983-2985 (2019). https://doi.org/10.1021/acsenergylett.9b02442
  63. Messmer, C. et al. The race for the best silicon bottom cell: Efficiency and cost evaluation of perovskite-silicon tandem solar cells. Progress in Photovoltaics: Research and Applications 29, 744-759 (2021). https://doi.org/10.1002/pip.v29.7
  64. Kim, C. U. et al. Optimization of device design for low cost and high efficiency planar monolithic perovskite/silicon tandem solar cells. Nano Energy 60, 213-221 (2019). https://doi.org/10.1016/j.nanoen.2019.03.056
  65. Jung, E. D. et al. Aesthetic and efficient perovskite/Si tandem solar cells using luminescent down-shifting textured anti-reflection films. EcoMat 5, e12399 (2023). https://doi.org/10.1002/eom2.v5.10
  66. Lee, S. et al. Improving Light Absorption in a Perovskite/Si Tandem Solar Cell via Light Scattering and UV-Down Shifting by a Mixture of SiO2 Nanoparticles and Phosphors. Adv. Funct. Mater. 32, 2204328 (2022). https://doi.org/10.1002/adfm.v32.35
  67. Wu, Y. et al. Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency. Energy Environ. Sci. 10, 2472-2479 (2017).
  68. Phung, N. et al. Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell. Sol. Energy Mater. and Solar Cells 261, 112498 (2023). https://doi.org/10.1016/j.solmat.2023.112498
  69. Hermle, M., Feldmann, F., Bivour, M., Goldschmidt, J. C. & Glunz, S. W. Passivating contacts and tandem concepts: Approaches for the highest silicon-based solar cell efficiencies. Appl. Phys. Rev. 7, 021305 (2020). https://doi.org/10.1063/1.5139202
  70. Sun, Z. et al. Toward Efficiency Limits of Crystalline Silicon Solar Cells: Recent Progress in High-Efficiency Silicon Heterojunction Solar Cells. Adv. Energy Mater. 12, 2200015 (2022). https://doi.org/10.1002/aenm.v12.23
  71. Mariotti, S. et al. Monolithic Perovskite/Silicon Tandem Solar Cells Fabricated Using Industrial p-Type Polycrystalline Silicon on Oxide/Passivated Emitter and Rear Cell Silicon Bottom Cell Technology. Sol. RRL 6, 2101066 (2022). https://doi.org/10.1002/solr.v6.4
  72. Sveinbjörnsson, K. et al. Monolithic Perovskite/Silicon Tandem Solar Cell with 28.7% Efficiency Using Industrial Silicon Bottom Cells. ACS Energy Lett. 7, 2654-2656 (2022). https://doi.org/10.1021/acsenergylett.2c01358
  73. Ying, Z. et al. Monolithic perovskite/black-silicon tandems based on tunnel oxide passivated contacts. Joule 6, 2644-2661 (2022). https://doi.org/10.1016/j.joule.2022.09.006
  74. Walter, A. et al. Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells. Energy Advances 2, 1818-1822 (2023). https://doi.org/10.1039/D3YA00048F
  75. Ibarra Michel, J., Dréon, J., Boccard, M., Bullock, J. & Macco, B. Carrier-selective contacts using metal compounds for crystalline silicon solar cells. Progress in Photovoltaics: Research and Applications 31, 380-413 (2023). https://doi.org/10.1002/pip.v31.4
  76. Ding, Z. et al. Highly passivated TOPCon bottom cells for perovskite/silicon tandem solar cells. Nat. Commun. 15, 8453 (2024). https://doi.org/10.1038/s41467-024-52309-2
  77. Boccard, M. & Ballif, C. Influence of the Subcell Properties on the Fill Factor of Two-Terminal Perovskite-Silicon Tandem Solar Cells. ACS Energy Lett. 5, 1077-1082 (2020). https://doi.org/10.1021/acsenergylett.0c00156
  78. Ren, Q. et al. High near-infrared wavelength response planar silicon-heterojunction solar cells. Solar Energy Materials and Solar Cells 185, 124-129 (2018). https://doi.org/10.1016/j.solmat.2018.05.010
  79. He, Y. et al. Composition engineering of perovskite absorber assisted efficient textured monolithic perovskite/silicon heterojunction tandem solar cells. RSC Adv. 13, 7886-7896 (2023).
  80. Harter, A. et al. Perovskite/Silicon Tandem Solar Cells Above 30% Conversion Efficiency on Submicron-Sized Textured Czochralski-Silicon Bottom Cells with Improved Hole-Transport Layers. ACS Appl Mater Interfaces 16, 62817-62826 (2024). https://doi.org/10.1021/acsami.4c09264
  81. Ying, Z., Yang, X., Wang, X. & Ye, J. Towards the 10-Year Milestone of Monolithic Perovskite/Silicon Tandem Solar Cells. Adv. Mater. 36, 2311501 (2024).
  82. Li, Y. et al. Wide Bandgap Interface Layer Induced Stabilized Perovskite/Silicon Tandem Solar Cells with Stability over Ten Thousand Hours. Adv. Energy Mater. 11, 2102046 (2021). https://doi.org/10.1002/aenm.v11.48
  83. Philippe, B. et al. Chemical and electronic structure characterization of lead halide perovskites and stability behavior under different exposures-A photoelectron spectroscopy investigation. Chem. Mater. 27, 1720-1731 (2015). https://doi.org/10.1021/acs.chemmater.5b00348
  84. Chu, Q. Q. et al. Encapsulation: The path to commercialization of stable perovskite solar cells. Matter 6, 3838-3863 (2023). https://doi.org/10.1016/j.matt.2023.08.016
  85. Lou, Q. et al. Enhanced Efficiency and Stability of n-i-p Perovskite Solar Cells by Incorporation of Fluorinated Graphene in the Spiro-OMeTAD Hole Transport Layer. Adv. Energy Mater. 12, 2201344 (2022).
  86. Zhu, H. et al. Long-term operating stability in perovskite photovoltaics. Nat. Rev. Mater. 8, 569-586 (2023). https://doi.org/10.1038/s41578-023-00582-w
  87. Li, Q. et al. Graphene-Polymer Reinforcement of Perovskite Lattices for Durable Solar Cells. Science 387, 6738 (2025). https://doi.org/10.1126/science.adu5563
  88. Sun, X. et al. Vapor-Assisted Surface Reconstruction Enables Outdoor-Stable Perovskite Solar Modules. Science 388, 6750 (2025). https://doi.org/10.1126/science.adv4280
  89. De Bastiani, M. et al. Mechanical Reliability of Fullerene/Tin Oxide Interfaces in Monolithic Perovskite/Silicon Tandem Cells. ACS Energy Lett. 7, 827-833 (2022). https://doi.org/10.1021/acsenergylett.1c02148
  90. Dai, Z. & Padture, N. P. Challenges and opportunities for the mechanical reliability of metal halide perovskites and photovoltaics. Nat. Energy 8, 1319-1327 (2023). https://doi.org/10.1038/s41560-023-01378-6
  91. Hoke, E. T. et al. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. Chem. Sci. 6, 613-617 (2015). https://doi.org/10.1039/C4SC03141E
  92. Lee, J. W. et al. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell. Adv. Energy Mater. 5, 1501310 (2015).
  93. Eames, C. et al. Ionic transport in hybrid lead iodide perovskite solar cells. Nat Commun 6, 7497 (2015). https://doi.org/10.1038/ncomms8497
  94. Kim, H. et al. Modulating Molecular Interaction of Zwitterion Toward Rational Interface Engineering of Perovskite Solar Cells. Adv. Energy Mater. 14, 2401263 (2024). https://doi.org/10.1002/aenm.v14.32
  95. Li, H. et al. 2D/3D heterojunction engineering at the buried interface towards high-performance inverted methylammonium-free perovskite solar cells. Nat. Energy 8, 946-955 (2023). https://doi.org/10.1038/s41560-023-01295-8
  96. Gong, C. et al. Functional-Group-Induced Single Quantum Well Dion-Jacobson 2D Perovskite for Efficient and Stable Inverted Perovskite Solar Cells. Adv. Mater. 36, 2307422 (2024).
  97. Zang, X. et al. Passivating Dipole Layer Bridged 3D/2D Perovskite Heterojunction for Highly Efficient and Stable p-i-n Solar Cells. Adv. Mater. 36, 2309991 (2024).
  98. Zhang, F. et al. Metastable Dion-Jacobson 2D Structure Enables Efficient and Stable Perovskite Solar Cells. Science 375, 71-76 (2021). https://doi.org/10.1126/science.abj2637
  99. Azmi, R. et al. Double-side 2D/3D heterojunctions for inverted perovskite solar cells. Nature 628, 93-98 (2024). https://doi.org/10.1038/s41586-024-07189-3
  100. Wang, Y. et al. Lattice Mismatch at the Heterojunction of Perovskite Solar Cells. Angew. Chem. - Int. Ed. 63, e202405878 (2024). https://doi.org/10.1002/anie.v63.29
  101. Subbiah, A. S. et al. High-performance perovskite single-junction and textured perovskite/silicon tandem solar cells via slot-die-coating. ACS Energy Lett. 5, 3034-3040 (2020). https://doi.org/10.1021/acsenergylett.0c01297
  102. Hou, Y. et al. Efficient Tandem Solar Cells with Solution-Processed Perovskite on Textured Crystalline Silicon. Science 367, 1135-1140 (2020). https://doi.org/10.1126/science.aaz3691
  103. Du, S. et al. Impact of Precursor Concentration on Perovskite Crystallization for Efficient Wide-Bandgap Solar Cells. Materials 15, 3185 (2022). https://doi.org/10.3390/ma15093185
  104. Jones, T. W. et al. Lattice strain causes non-radiative losses in halide perovskites. Energy Environ. Sci. 12, 596-606 (2019). https://doi.org/10.1039/C8EE02751J
  105. Liu, D. et al. Strain analysis and engineering in halide perovskite photovoltaics. Nature Materials 20, 1337-1346 (2021). https://doi.org/10.1038/s41563-021-01097-x
  106. Aydin, E. et al. Pathways toward commercial perovskite/silicon tandem photovoltaics. Science 383, 1-13 (2024). https://doi.org/10.1126/science.adh3849
  107. Tennyson, E. M. et al. Multimodal Microscale Imaging of Textured Perovskite-Silicon Tandem Solar Cells. ACS Energy Lett. 6, 2293-2304 (2021). https://doi.org/10.1021/acsenergylett.1c00568
  108. Er-Raji, O., Rustam, L., Kore, B. P., Glunz, S. W. & Schulze, P. S. C. Insights into Perovskite Film Formation Using the Hybrid Evaporation/Spin-Coating Route: An In Situ XRD Study. ACS Appl. Energy Mater. 6, 6183-6193 (2023). https://doi.org/10.1021/acsaem.3c00698
  109. Heiderhoff, R. et al. Thermal Conductivity of Methylammonium Lead Halide Perovskite Single Crystals and Thin Films: A Comparative Study. J. Phys. Chem. C 121, 28306-28311 (2017). https://doi.org/10.1021/acs.jpcc.7b11495
  110. Okada, Y. & Tokumaru, Y. Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K. J. Appl. Phys. 56, 314-320 (1984). https://doi.org/10.1063/1.333965
  111. Er-raji, O. et al. Tailoring perovskite crystallization and interfacial passivation in efficient, fully textured perovskite silicon tandem solar cells. Joule 8, 2811-2833 (2024). https://doi.org/10.1016/j.joule.2024.06.018
  112. Ye, F. et al. Overcoming C60-induced interfacial recombination in inverted perovskite solar cells by electron-transporting carborane. Nat Commun 13, 7454 (2022). https://doi.org/10.1038/s41467-022-34203-x
  113. Said, A. A. et al. Sublimed C60 for efficient and repeatable perovskite-based solar cells. Nature Communications 15, 708 (2024).
  114. Warby, J. et al. Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells. Adv. Energy Mater. 12, 2103567 (2022).
  115. Yang, Q. et al. Toward the working mechanisms of tin oxide as buffer layer in perovskite/silicon tandem solar cells. Appl. Phys. Rev. 12, 021403 (2025).
  116. Aydin, E. et al. Sputtered transparent electrodes for optoelectronic devices: Induced damage and mitigation strategies. Matter 4, 3549-3584 (2021). https://doi.org/10.1016/j.matt.2021.09.021
  117. Li, C. et al. Achieving 32% Efficiency in Perovskite/Silicon Tandem Solar Cells with Bidentate-Anchored Superwetting Self-Assembled Molecular Layers. Angew. Chem. - Int. Ed. 64, e202502730 (2025).
  118. Li, B. et al. Atomic-Layer-Deposition-Free Monolithic Perovskite/Silicon Tandem Solar Cell Reaching 29.91% Power Conversion on Industrial PERX/TOPCon-like Silicon Bottom Cells. ACS Energy Lett. 9, 4550-4556 (2024). https://doi.org/10.1021/acsenergylett.4c01502
  119. Magliano, E. et al. Solution-Processed Metal-Oxide Nanoparticles to Prevent The Sputtering Damage in Perovskite/Silicon Tandem Solar Cells. ACS Appl. Mater. Interfaces 17, 17599-17610 (2025). https://doi.org/10.1021/acsami.5c00090
  120. Li, W. et al. Reactive Plasma Deposition of ITO as an Efficient Buffer Layer for Inverted Perovskite Solar Cells. Adv. Mater. 37, 2417094 (2025).
  121. Lu, Z. et al. High quality of IWO films prepared at room temperature by reactive plasma deposition for photovoltaic devices. J. Phys. D. Appl. Phys. 46, 075103 (2013). https://doi.org/10.1088/0022-3727/46/7/075103
  122. Song, C. et al. Room temperature deposition of IWO electrodes on Spiro-OMeTAD without buffer layers for Semi-transparent perovskite solar cells. Mater. Lett. 347, 134612 (2023).
  123. Michelmore, A., Whittle, J. D., Bradley, J. W. & Short, R. D. Where physics meets chemistry: Thin film deposition from reactive plasmas. Frontiers of Chemical Science and Engineering 10, 441-458 (2016).
  124. Yuan, C. et al. Stable Indium Tin Oxide with High Mobility. ACS Appl. Mater. Interfaces 14, 49937-49944 (2022). https://doi.org/10.1021/acsami.2c13312
  125. Yin, R. et al. Fabricating Perovskite Films for Solar Modules from Small to Large Scale. Adv. Funct. Mater. 35, 2419184 (2025). https://doi.org/10.1002/adfm.v35.24
  126. Fu, F. et al. Monolithic Perovskite-Silicon Tandem Solar Cells: From the Lab to Fab? Adva. Mater. 34, 2106540 (2022). https://doi.org/10.1002/adma.v34.24
  127. Li, X. et al. How to enable highly efficient and large-area fabrication on specific textures for monolithic perovskite/silicon tandem solar cells? Information & Functional Materials 1, 160-180 (2024). https://doi.org/10.1002/ifm2.v1.2
  128. Lu, C. A., Lin, P., Lin, H. C. & Wang, S. F. Characterization of the low-curing-temperature silver paste with silver 2-ethylhexanoate addition. Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers 46, 251-255 (2007). https://doi.org/10.1143/JJAP.46.251
  129. da Silva Filho, J. M. C. et al. Investigation of the stability of metallic grids for large-area perovskite solar cells. Solar Energy Materials and Solar Cells 276, 113043 (2024). https://doi.org/10.1016/j.solmat.2024.113043
  130. Kamino, B. A. et al. Low-Temperature Screen-Printed Metallization for the Scale-Up of Two-Terminal Perovskite-Silicon Tandems. ACS Appl. Energy Mater. 2, 3815-3821 (2019). https://doi.org/10.1021/acsaem.9b00502
  131. Rehman, A. ur et al. Electrode metallization for scaled perovskite/silicon tandem solar cells: Challenges and opportunities. Progress in Photovoltaics: Research and Applications 31, 429-442 (2023). https://doi.org/10.1002/pip.v31.4