Advances in aircraft and spacecraft science

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Micromechanical model-based analysis of porous functionally graded plates behavior using refined higher-order theory

  • Belkacem Adim (Civil, Mechanical and Transportation Engineering Department, Tissemsilt University) ;
  • Tahar Hassaine Daouadji (Geomatics and Sustainable Development Laboratory, Ibn Khaldoun University) ;
  • Kheira Bekda (Civil, Mechanical and Transportation Engineering Department, Tissemsilt University)
  • Received : 2025.01.29
  • Accepted : 2025.05.08
  • Published : 2025.06.25
⟨ Previous Next ⟩

Abstract

This manuscript investigates the impact of porosity and micromechanical models on the flexural behavior of functionally graded plates employing a refined higher order shear and deformation theory. The plate's material properties are supposed to be varying gradually through the direction of the plate's thickness according to different micromechanical models namely: Voigt's model often used in furthermost functionally graded plates researches, Mori Tanaka's, Reuss's and LRVE's models. Virtual works principle is employed to determine the equations of equilibrium and some numerical results are exhibited to validate the accuracy and effectiveness of the present theory for flexural behavior of functionally graded plates. A parametric investigation is conducted to assess the influence of various parameters on the displacements and stresses of the plate including micromechanical models', porosity distribution shape and geometry of the plate. In light of this study we conclude that the present refined theory is efficient accurate and reliable for predicting the flexural behavior of functionally graded plates considering different porosity distribution shapes and various micromechanical models.

Keywords

References

  1. Abouelregal, A.E. (2022), "Generalized thermoelastic MGT model for a functionally graded heterogeneous unbounded medium containing a spherical hole", Eur. Phys. J. Plus, 137(8), 953. https://doi.org/10.1140/epjp/s13360-022-03160-1.
  2. Abouelregal, A.E. and Dargail, H.E. (2023), "Memory and dynamic response of a thermoelastic functionally graded nanobeams due to a periodic heat flux", Mech. Bas. Des. Struct. Mach., 51(4), 2154-2176. https://doi.org/10.1080/15397734.2021.1890616.
  3. Abouelregal, A.E. and Mohamed, B.O. (2018), "Fractional order thermoelasticity for a functionally graded thermoelastic nanobeam induced by a sinusoidal pulse heating", J. Comput. Theor. Nanosci., 15(4), 1233-1242. https://doi.org/10.1166/jctn.2018.7209.
  4. Adim, B. and Daouadji, T.H. (2024), "Analysis of buckling behavior of functionally graded plates under mechanical loading", J. Nano-Electr. Phys., 16(2), 02003. https://doi.org/10.21272/jnep.16(2).02003.
  5. Adim, B., Daouadji, T.H. and Rabahi, A. (2016), "A simple higher order shear deformation theory for mechanical behavior of laminated composite plates", Int. J. Adv. Struct. Eng. (IJASE), 8(2), 103-117. https://doi.org/10.1007/s40091-016-0109-x.
  6. Adiyaman, G. and Turan, M. (2024), "Bending and buckling analysis of porous 2D functionally graded beams with exponential material property variation", Iran. J. Sci. Technol., Tran. Civil Eng., 1-28. https://doi.org/10.1007/s40996-024-01508-4.
  7. Alsaeed, S.S. and Abouelregal, A.E. (2025), "Analysis of thermomechanical responses of functionally graded unbounded materials using an advanced dual‐phase delay heat transfer model with higher‐order fractional derivatives", ZAMM‐J. Appl. Math. Mech./Zeitschrift für Angewandte Mathematik und Mechanik, 105(1), e202400930. https://doi.org/10.1002/zamm.202400930.
  8. Amir, M., Kim, S.W. and Choi, D. (2024), "Comparative static analysis of functionally graded porous curved beams: Deterministic versus stochastic approaches", Jo. Strain Anal. Eng. Des., 59(8), 559-574. https://doi.org/10.1177/03093247241273794.
  9. Billel, R. (2023), "Contribution to study the effect of (Reuss, LRVE, Tamura) models on the axial and shear stress of sandwich FGM plate (Ti-6A1-4V/ZrO 2) subjected on linear and nonlinear thermal loads", AIMS Mater. Sci., 10(1), 26-39. https://doi.org/10.3934/matersci.2023002.
  10. Bouazza, M., Amara, K.H. and Zidour, M. (2024), "Employing an analytical method for post-buckling analysis of functionally graded beams", Adv. Aircraft Spacecraft Sci., 11(4), 299-312. https://doi.org/10.12989/aas.2025.11.4.299.
  11. Bui, T.T.H., Tran, T.T.H. and Nguyen, D.K. (2021), "Geometrically nonlinear behaviour of functionally graded beam and frame structures under mechanical loading", Regional Conference in Mechanical Manufacturing Engineering, 326-342, Singapore. https://doi.org/10.1007/978-981-19-1968-8_26.
  12. Chen, H.Y., Li, W. and Zhang, J.N. (2024), "Effect of micromechanical models on mechanical behavior of functionally graded plates based on a quasi-3D hyperbolic shear deformation theory", Int. J. Acoust. Vib., 29(2), 161. https://doi.org/10.20855/ijav.2024.29.22045.
  13. Chen, S., Geng, R. and Li, W. (2021), "Vibration analysis of functionally graded beams using a higher-order shear deformable beam model with rational shear stress distribution", Compos. Struct., 277, 114586. https://doi.org/10.1016/j.compstruct.2021.114586.
  14. Daouadji, T.H. and Adim, B. (2016), "An analytical approach for buckling of functionally graded plates", Adv. Mater. Res., 5(3), 141-169. https://doi.org/10.12989/amr.2016.5.3.141
  15. Daouadji, T.H., Benferhat, R. and Adim, B. (2016a), "Bending analysis of an imperfect advanced composite plates resting on the elastic foundations", Couple. Syst. Mech., 5(3), 269-283. https://doi.org/10.12989/csm.2017.5.3.269.
  16. Daouadji, T.H., Chedad, A. and Adim, B. (2016b), "Interfacial stresses in RC beam bonded with a functionally graded material plate", Struct. Eng. Mech., 60(4), 693-705. https://doi.org/10.12989/sem.2016.60.4.693.
  17. Gawdzińska, K., Jackowski, J. and Szweycer, M. (2001), "Odmiany porowatości odlewów z metalowych kompozytów nasycanych", Kompozyty, 1(1), 68-71.
  18. Ghazzawi, S.M. and Abdelrahman, W.G. (2020), "Static analysis of thick functionally graded plates with different property distribution functions", Arab. J. Sci. Eng., 45(7), 5099-5108. https://doi.org/10.1007/s13369-020-04344-6.
  19. Hadj, B., Rabia, B. and Daouadji, T.H. (2021), "Vibration analysis of porous FGM plate resting on elastic foundations: Effect of the distribution shape of porosity", Couple. Syst. Mech., 10(1), 61-77. https://doi.org/10.12989/csm.2021.10.1.061.
  20. Henni, M.A.B., Abbès, B., Daouadji, T.H., Abbès, F. and Adim, B. (2021), "Numerical modeling of hygrothermal effect on the dynamic behavior of hybrid composite plates", Steel Compos. Struct., 39(6), 751-763. https://doi.org/10.12989/scs.2021.39.6.751.
  21. Joshi, K.K., Kar, V.R., Ghatage, P.S. and Layek, R.K. (2022), "Multi-directional graded composites: An introduction", Advanced Composite Materials and Structures, CRC Press.
  22. Kim, J. and Reddy, J.N. (2013), "Analytical solutions for bending, vibration, and buckling of FGM plates using a couple stress-based third-order theory", Compos. Struct., 103, 86-98. https://doi.org/10.1016/j.compstruct.2013.03.007.
  23. Li, W., Chen, H., Chen, S. and Liu, Z. (2025), "A force-based beam element model based on the modified higher-order shear deformation theory for accurate analysis of FG beams", Struct., 71, 107991. https://doi.org/10.1016/j.istruc.2024.107991.
  24. Li, W., Gao, W. and Chen, S. (2020), "A material-based higher-order shear beam model for accurate analyses of FG beams with arbitrary material distribution", Compos. Struct., 245, 112253. https://doi.org/10.1016/j.compstruct.2020.112253.
  25. Li, W., Liu, Z. and Chen, S. (2024), "A modified quasi-3D theory and mixed beam element method for static behaviour analysis of functionally graded beams", Thin Wall. Struct., 204, 112316. https://doi.org/10.1016/j.tws.2024.112316.
  26. Li, W., Ma, H. and Gao, W. (2019), "A higher-order shear deformable mixed beam element model for accurate analysis of functionally graded sandwich beams", Compos. Struct., 221, 110830. https://doi.org/10.1016/j.compstruct.2019.04.002.
  27. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012), "Bending response of functionally graded plates by using a new higher order shear deformation theory", Compos. Struct., 94(2), 714-723. https://doi.org/10.1016/j.compstruct.2011.09.007.
  28. Masmoudi, F., Tamrabet, A., Refrafi, S., Alselami, N., Menasria, A., Bouhadra, A. and Benyoucef, S. (2024), "Coupled loading hygro-thermo-mechanical Effect on the stability of imperfect functionally graded sandwich plates", J. Comput. Appl. Mech., 55(4), 617-635. https://doi.org/10.22059/jcamech.2024.374122.1007.
  29. Nadiia, D. and Jia, Q. (2024), "Effect of porous defects on mechanical behavior of functionally graded materials", J. Strain Anal. Eng. Des., 60(2), 106-116. https://doi.org/10.1177/03093247241287951.
  30. Naebe, M. and Shirvanimoghaddam, K. (2016), "Functionally graded materials: A review of fabrication and properties", Appl. Mater. Today, 5, 223-245. https://doi.org/10.1016/j.apmt.2016.10.001
  31. Naveen K.S.N. and Devarajaiah R.M. (2024), Functionally Graded Materials, Futuristic Trends in Mechanical Engineering Book 5, Volume 3, IIP Series.
  32. Njim, E.K., Sadiq, S.E., Tahir, M.A.D., Flayyih, M.A. and Hadji, L. (2023), "Flexural bending and fatigue analysis of functionally graded viscoelastic materials: experimental and numerical approaches", Phys. Chem. Solid State, 24(4), 628-639. https://doi.org/10.15330/pcss.24.4.628-639.
  33. Noori, M., Bilgin, A., Diallo, H., Al Rousan, M.O. and Noorı, A.R. (2024), "A study on the influence of material gradient index on bending and stress responses of FGM rectangular plates using the Finite Element Method", J. Sustain. Constr. Mater. Technol., 9(3), 239-254. https://doi.org/10.47481/jscmt.1555157.
  34. Sahmani, S., Safaei, B. and Aldakheel, F. (2021), "Surface elastic-based nonlinear bending analysis of functionally graded nanoplates with variable thickness", Eur. Phys. J. Plus, 136, 1-28. https://doi.org/10.1140/epjp/s13360-021-01667-7.
  35. Sidda R.B. and Vijaya K.R.K. (2024), "Analyzing the buckling behavior of in-plane bidirectional functionally graded porous plates", J. Comput. Appl. Mech., 55(3), 322-339. https://doi.org/10.22059/jcamech.2024.373641.995.
  36. Silva, R.F., Coelho, P.G., Gustavo, C.V., Almeida, C.J., Farias, F.W.C., Duarte, V.R., ... & Santos, T.G. (2024), "Functionally graded materials and structures: Unified approach by optimal design, metal additive manufacturing, and image-based characterization", Mater., 17(18), 4545. https://doi.org/10.3390/ma17184545.
  37. Son, T. and Qui, L.X. (2022), "Investigate the bending and free vibration responses of multi-directional functionally graded plates with variable thickness based on isogeometric analysis", J. Sci. Technol. Civil Eng. (JSTCE)-HUCE, 16(4), 10-29. https://doi.org/10.31814/stce.nuce2022-16(4)-02.
  38. Wu, C., Zhang, L., Weng, G.J. and Yin, H. (2024), "Thermomechanical modeling of functionally graded materials based on bimaterial fundamental solutions", Int. J. Eng. Sci., 198, 104040. https://doi.org/10.1016/j.ijengsci.2024.104040.
  39. Wu, C.P. and Li, H.Y. (2010), "An RMVT-based third-order shear deformation theory of multilayered functionally graded material plates", Compos. Struct., 92(10), 2591-2605. https://doi.org/10.1016/j.compstruct.2010.01.022.
  40. Wu, C.P., Chiu, K.H. and Wang, Y.M. (2011), "RMVT-based meshless collocation and element-free Galerkin methods for the quasi-3D analysis of multilayered composite and FGM plates", Compos. Struct., 93(2), 923-943. https://doi.org/10.1016/j.compstruct.2010.07.001.
  41. Zaoui, F.Z., Ouinas, D., Achour, B., Touahmia, M., Boukendakdji, M., Latifee, E.R., ... & Viña Olay, J.A. (2022), "Mathematical approach for mechanical behaviour analysis of FGM plates on elastic foundation", Math., 10(24), 4764. https://doi.org/10.3390/math10244764.
  42. Zenkour, A.M. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Model., 30(1), 67-84. https://doi.org/10.1016/j.apm.2005.03.009.
  43. Zghal, S. and Dammak, F. (2024), Functionally Graded Materials: Analysis and Applications to FGM, FG-CNTRC and FG Porous Structures, CRC Press.