DOI QR코드

DOI QR Code

Long-term durability enhancement of ultra-high-performance concrete via metakaolin and kieselguhr incorporation, freeze-thaw, chloride, sulfate, and shrinkage perspectives

  • Umara Nasir (Department of Civil Engineering, University of Engineering and Technology) ;
  • Nejib Ghazouani (Mining Research Center, Northern Border University) ;
  • Khaled Mohamed Elhadi (Civil Engineering Department, College of Engineering, King Khalid University)
  • Received : 2025.05.18
  • Accepted : 2026.02.09
  • Published : 2026.02.25

Abstract

This study investigates the long-term durability of ultra-high-performance concrete (UHC altered with metakaolin (MK) and kieselguhr earth (KE). These materials were used as sustainable alternatives to silica fume and fly ash. Four UHC pastes were developed and tested. Durability performance was evaluated through freeze-thaw resistance, chloride ion permeability, sulfate attack, and drying shrinkage under different curing regimes. All UHC pastes showed excellent freeze-thaw resistance. No mass loss and 100% relative dynamic modulus were recorded after 300 cycles. The control paste exhibited a 23% reduction in modulus of rupture after freeze-thaw exposure. In contrast, the MK and MK-KE pastes showed reductions of only 3.68% and 3.6%, respectively. Chloride permeability was significantly reduced with MK and KE incorporation. Complete replacement of fly ash with MK reduced the total charge passed by 52.9% and increased surface resistivity by 423%. The KE paste showed a 35.2% reduction in charge passed. Sulfate resistance was excellent for all pastes. Length expansion remained below 0.01% at six months, far lower than the ASTM C1012 limit of 0.10%. The MK paste showed the lowest expansion of only 0.001%. Drying shrinkage depended strongly on curing conditions. Under air-dry curing, shrinkage ranged from 748 με to 1002 με. The MK paste showed the lowest shrinkage, while the KE paste showed the highest. Under moist curing, shrinkage was significantly reduced. The KE paste recorded the lowest value of 215 με at 56 days. The MK paste consistently showed the lowest cracking potential index under all curing regimes. Hence, MK and KE significantly enhance UHC durability and dimensional stability. Their combined use provides a promising pathway for sustainable and resilient UHC in aggressive environments.

Keywords

Acknowledgement

The authors extend their appreciation to the Deanship of Research and Graduate Studies at King Khalid University for funding this work through a Large Research Project under grant number RGP 2/358/46. The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University, Arar, KSA for funding this research work through the project number "NBU-FFR-2026-2105-04".

References

  1. Salahaddin, S.D., Haido, J.H., Wardeh, G. (2024). Rheological and mechanical characteristics of basalt fiber UHPC incorporating waste glass powder in lieu of cement. Ain Shams Engineering Journal, 15(3), 102515. https://doi.org/10.1016/j.asej.2023.102515.
  2. Shang, J.Q., Su, Y.L., Fan, J.J., Zhang, P., Sheikh, S.A. (2024). Experimental research on the flexural behavior of GFRP bar-reinforced composite beams with different shapes of prefabricated UHPC formwork. Journal of Building Engineering, 82, 108048. https://doi.org/10.1016/j.jobe.2023.108048.
  3. Allena, S., Newtson, C.M. (2011). Ultra-high strength concrete mixtures using local materials. Journal of Civil Engineering and Architecture, 5(4), 322-330.
  4. Al-Rawi, S., Taysi, N. (2018). Performance of self-compacting geopolymer concrete with and without GGBFS and steel fiber. Advances in Concrete Construction, 6(4), 323. https://doi.org/10.12989/acc.2018.6.4.323.
  5. Midhun, M., Rao, T.G., Srikrishna, T.C. (2018). Mechanical and fracture properties of glass fiber reinforced geopolymer concrete. Advances in Concrete Construction, 6(1), 29. https://doi.org/10.12989/acc.2018.6.1.029.
  6. Kurtoglu, A.E., Alzeebaree, R., Aljumaili, O., Nis, A., Gulsan, M.E., Humur, G., Cevik, A. (2018). Mechanical and durability properties of fly ash and slag based geopolymer concrete. Advances in Concrete Construction, 6(4), 345. https://doi.org/10.12989/acc.2018.6.4.345.
  7. Hassan, A., Arif, M., Shariq, M. (2020). Influence of microstructure of geopolymer concrete on its mechanical properties—A review. Advances in sustainable construction materials and geotechnical engineering: Select proceedings of TRACE, 119-129.
  8. Jindal, B.B., Singhal, D., Sharma, S.K., Ashish, D.K. (2017). Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine. Advances in Concrete Construction, 5(1), 17. https://doi.org/10.12989/acc.2017.19.2.017.
  9. Qaidi, S.M., Atrushi, D.S., Mohammed, A.S., Ahmed, H.U., Faraj, R.H., Emad, W., ... Najm, H.M. (2022). Ultra-high-performance geopolymer concrete: a review. Construction and Building Materials, 346, 128495. https://doi.org/10.1016/j.conbuildmat.2022.128495.
  10. Andrade, C., Torres. J. (2013). Long term carbonation of UHPC. Proceedings of international symposium on ultra-high performance fiber-reinforced concrete, Marseille, France.
  11. Colombo, I.G., Colombo, M., Di Prisco, M. (2015). Tensile behavior of textile reinforced concrete subjected to freezing-thawing cycles in un-cracked and cracked regimes. Cement and Concrete Research, 73, 169-183. https://doi.org/10.1016/j.cemconres.2015.03.001.
  12. Alkaysi, M., El-Tawil, S., Liu, Z., Hansen, W. (2016). Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC). Cement and Concrete Composites, 66, 47-56. https://doi.org/10.1016/j.cemconcomp.2015.11.005.
  13. Muro-Villanueva, J., Newtson, C.M., Weldon, B.D., Jauregui, D.V., Allena, S. (2013). Freezing and thawing durability of ultra high strength concrete. Journal of Civil Engineering and Architecture, 7(8), 907. https://doi.org/10.17265/1934-7359
  14. Zibara, H., Hooton, R.D., Thomas, M.D.A., Stanish, K. (2008). Influence of the C/S and C/A ratios of hydration products on the chloride ion binding capacity of lime-SF and lime-MK mixtures. Cement and Concrete Research, 38(3), 422-426. https://doi.org/10.1016/j.cemconres.2007.08.024.
  15. Hasan, T.M., Allena, S., Gilbert, L. (2024). Rapid chloride penetration test: an evaluation of corrosion resistance in ultra-high performance concrete. Journal of Building Engineering, 82, 108317. https://doi.org/10.1016/j.jobe.2023.108317.
  16. Long, W.J., Zhang, X., Feng, G.L., Xie, J., Xing, F., Dong, B., ... Khayat, K.H. (2022). Investigation on chloride binding capacity and stability of Friedel's salt in graphene oxide reinforced cement paste. Cement and Concrete Composites, 132, 104603. https://doi.org/10.1016/j.cemconcomp.2022.104603.
  17. Neithalath, N., Jain, J. (2010). Relating rapid chloride transport parameters of concretes to microstructural features extracted from electrical impedance. Cement and Concrete Research, 40(7), 1041-1051. https://doi.org/10.1016/j.cemconres.2010.02.016.
  18. Alashker, Y., Selmi, A., Raza, A., Ghazouani, N. (2025). Microstructural and thermal characterization of polyethylene and basalt fiber-reinforced natural zeolite-based engineered geopolymer composites. Materials Letters, 383, 137984. https://doi.org/10.1016/j.matlet.2025.137984.
  19. Ghazouani, N., Salmi, A., Raza, A., Elhag, A.B., Shabbir, F., Zahra, F. (2025). Mechanical strength and mineralogical properties of fiber-reinforced geopolymer composites with multi-walled carbon nanotubes. Materials Letters, 382, 137843. https://doi.org/10.1016/j.matlet.2024.137843.
  20. Al-Naghi, A.A.A., Ghazouani, N., Selmi, A., Alashker, Y., Raza, A. (2025). Combined effects of elevated temperature, sulfates and chlorides on performance of fly ash and metakaolin-based recycled aggregate geopolymer concrete. Journal of Building Engineering, 99, 111561. https://doi.org/10.1016/j.jobe.2024.111561.
  21. Song, Q., Yu, R., Shui, Z., Wang, Y., Rao, S., Wu, S., He, Y. (2019). Physical and chemical coupling effect of metakaolin induced chloride trapping capacity variation for Ultra High Performance Fibre Reinforced Concrete (UHPFRC). Construction and Building Materials, 223, 765-774. https://doi.org/10.1016/j.conbuildmat.2019.07.047.
  22. Elahi, M.M.A., Reza, A.N.R., Shearer, C.R. (2021). Controlling aluminate phase hydration for sulfate resistance of Portland-limestone cements. Proceedings of the Institution of Civil Engineers-Construction Materials, 174(1), 34-46. https://doi.org/10.1680/jcoma.19.00099.
  23. Shi, Z., Ferreiro, S., Lothenbach, B., Geiker, M.R., Kunther, W., Kaufmann, J., ... Skibsted, J. (2019). Sulfate resistance of calcined clay-Limestone-Portland cements. Cement and Concrete Research, 116, 238-251. https://doi.org/10.1016/j.cemconres.2018.11.003.
  24. Singhal, D., Jindal, B.B. (2017). Experimental study on geopolymer concrete prepared using high-silica RHA incorporating alccofine. Advances in Concrete Construction, 5(4), 345. https://doi.org/10.12989/acc.2017.5.4.345.
  25. Ganesan, N., Indira, P. (2013). Engineering properties of steel fibre reinforced geopolymer concrete. Advances in Concrete Construction, 1(4), 305. https://doi.org/10.12989/acc2013.1.4.305.
  26. Mosaberpanah, M.A., Eren, O. (2017). Effect of quartz powder, quartz sand and water curing regimes on mechanical properties of UHPC using response surface modelling. Advances in Concrete Construction, 5(5), 481. https://doi.org/10.12989/acc.2017.5.5.481.
  27. Ganesan, N., Sahana, R., Indira, P. (2017). Effect of hybrid fibers on tension stiffening of reinforced geopolymer concrete. Advances in Concrete Construction, 5(1), 75. https://doi.org/10.12989/acc.2017.5.1.075.
  28. Patil, A.A., Chore, H., Dode, P. (2014). Effect of curing condition on strength of geopolymer concrete. Advances in Concrete Construction, 2(1), 29. https://doi.org/10.12989/acc.2014.2.1.029.
  29. Singhal, D. (2017). Development of mix design method for geopolymer concrete. Advances in Concrete Construction, 5(4), 377. https://doi.org/10.12989/acc.2017.5.4.377.
  30. Raza, A., Selmi, A., Arshad, M., Elhadi, K.M., Alashker, Y. (2024). Tests and modeling of hybrid fiber-reinforced geopolymer concrete elements having BFRP helix: An application for sustainable built environment. Journal of Building Engineering, 82, 108229. https://doi.org/10.1016/j.jobe.2023.108229.
  31. Raza, A., Selmi, A., Elhadi, K.M., Ghazouani, N., Chen, W. (2024). Strength analysis and microstructural characterization of calcined red mud based-geopolymer concrete modified with slag and phosphogypsum. Journal of Materials Research and Technology, 33, 6168-6181. https://doi.org/10.1016/j.jmrt.2024.10.248.
  32. Raza, A., Selmi, A., El Ouni, M.H., Arshad, M., Kahla, N.B. (2024). Rapid repair of geopolymer concrete members reinforced with polymer composites: parametric study and analytical modeling. Engineering Structures, 299, 117143. https://doi.org/10.1016/j.engstruct.2023.117143.
  33. Raza, A., Ahmed, B., El Ouni, M.H., Ghazouani, N., Chen, W. (2024). Microstructural and thermal characterization of polyethylene fiber-reinforced geopolymer composites. Journal of Building Engineering, 94, 109904. https://doi.org/10.1016/j.jobe.2024.109904.
  34. Raza, A., Ahmed, B., El Ouni, M.H., Chen, W. (2024). Mechanical, durability and microstructural characterization of cost-effective polyethylene fiber-reinforced geopolymer concrete. Construction and Building Materials, 432, 136661. https://doi.org/10.1016/j.conbuildmat.2024.136661.
  35. Elhadi, K.M., Raza, A., Ghazouani, N., Yaqub, M., Mabrouk, A. (2024). Material characterization of high-ductility geopolymer composites developed with industrial and construction & demolition wastes. Materials Letters, 382, 137961. https://doi.org/10.1016/j.matlet.2024.137961.
  36. Raza, A., Salmi, A., El Ouni, M.H., Ghazouani, N., Ahmed, B., Chen, W. (2024). Material characterization and thermal performance of polyethylene fiber-reinforced lightweight engineered geopolymer composites subjected to sulfate attacks. Construction and Building Materials, 455, 139156. https://doi.org/10.1016/j.conbuildmat.2024.139156.
  37. Mabrouk, A., Raza, A., Elhadi, K.M., Ahmed, B., Kubica, J., Chen, W. (2024). Effect of curing temperature, silica fume, and waste tire rubber aggregate on material characterization of lightweight geopolymer composite. Construction and Building Materials, 453, 139063. https://doi.org/10.1016/j.conbuildmat.2024.139063.
  38. Raza, A., Salmi, A., El Ouni, M.H., Shabbir, F., Ghazouani, N., Ahmed, B., ... Hendy, A.S. (2024). A comprehensive review on material characterization and thermal properties of geopolymers: potential of various fibers. Case Studies in Construction Materials, 21, e03519. https://doi.org/10.1016/j.cscm.2024.e03519.
  39. Yoo, D.Y., Kim, S., Kim, M.J. (2018). Comparative shrinkage behavior of ultra-high-performance fiber-reinforced concrete under ambient and heat curing conditions. Construction and Building Materials, 162, 406-419. https://doi.org/10.1016/j.conbuildmat.2017.12.029.
  40. Ghafari, E., Ghahari, S.A., Costa, H., Júlio, E., Portugal, A., Durães, L. (2016). Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. Construction and Building Materials, 127, 43-48. https://doi.org/10.1016/j.conbuildmat.2016.09.123. 
  41. Fu, D., Xia, C., Xu, S., Zhang, C., Jia, X. (2022). Effect of concrete composition on drying shrinkage behavior of ultra-high performance concrete. Journal of Building Engineering, 62, 105333. https://doi.org/10.1016/j.jobe.2022.105333.
  42. Yeluri, M., Ertugral, E.G., Sharma, Y., Fodor, P.S., Kothapalli, C.R., Allena, S. (2025). Revolutionizing ultra-high performance concrete: Unleashing metakaolin and diatomaceous earth as sustainable fly ash alternatives. Construction and Building Materials, 460, 139822. https://doi.org/10.1016/j.conbuildmat.2024.139822.
  43. Kamble, V., Kodwani, G., Sridharkrishna, R., Ankamwar, B. (2014). Synthesis of anisotropic defective polyaniline/silver nanocomposites. Advances in Nano Research, 2(2), 111. https://doi.org/10.12989/anr.2014.2.2.111.
  44. Khater, H. (2016). Nano-Silica effect on the physicomechanical properties of geopolymer composites. Advances in Nano Research, 4(3), 181. https://doi.org/10.12989/anr.2016.4.3.181.
  45. Farazin, A., Mohammadimehr, M. (2020). Nano research for investigating the effect of SWCNTs dimensions on the properties of the simulated nanocomposites: a molecular dynamics simulation. Advances in Nano Research, 9(2), 83-90. https://doi.org/10.12989/anr.2020.9.2.083.
  46. Sokhandani, N., Setoodeh, A., Zebarjad, S.M., Nikbin, K., Wheatley, G. (2022). The influence of nanosilica on the wear and mechanical performance of vinyl-ester/glass fiber nanocomposites. Advances in Nano Research, 13, 97-111. https://doi.org/10.12989/anr.2022.13.1.097.
  47. Huanga, S.J., Kannaiyan, S., Subramani, M. (2022). Effect of nano-Nb2O5 on the microstructure and mechanical properties of AZ31 alloy matrix nanocomposites. Advances in Nano Research, 13(4), 407-416. https://doi.org/10.12989/anr.2022.13.4.407.
  48. Khater, H., Abd El Gawwad, H. (2015). Effect of firing temperatures on alkali activated Geopolymer mortar doped with MWCNT. Advances in Nano Research, 3(4), 225. https://doi.org/10.12989/anr.2015.3.4.225.
  49. Merget, R., Bauer, T., Küpper, H., Philippou, S., Bauer, H., Breitstadt, R., Bruening, T. (2002). Health hazards due to the inhalation of amorphous silica. Archives of Toxicology, 75, 625-634. https://doi.org/10.1007/s002040100266.
  50. Diaz-Loya, I., Juenger, M., Seraj, S., Minkara, R. (2019). Extending supplementary cementitious material resources: reclaimed and remediated fly ash and natural pozzolans. Cement and Concrete Composites, 101, 44-51. https://doi.org/10.1016/j.cemconcomp.2017.06.011.
  51. Mo, Z., Wang, R., Gao, X. (2020). Hydration and mechanical properties of UHPC matrix containing limestone and different levels of metakaolin. Construction and Building Materials, 256, 119454. https://doi.org/10.1016/j.conbuildmat.2020.1194540.
  52. Hasan, M., Jamil, M., Saidi, T. (2023). Mechanical properties and durability of ultra-high-performance concrete with calcined diatomaceous earth as cement replacement. Journal of the Mechanical Behavior of Materials, 32(1), 20220272. https://doi.org/10.1515/jmbm-2022-0272.
  53. Bonneau, O., Lachemi, M., Dallaire, E., Dugat, J., Aitcin, P.C. (1997). Mechanical properties and durability of two industrial reactive powder concretes. Materials Journal, 94(4), 286-290. https://doi.org/10.14359/310.
  54. Wang, R., Hu, Z., Li, Y., Wang, K., Zhang, H. (2022). Review on the deterioration and approaches to enhance the durability of concrete in the freeze-thaw environment. Construction and Building Materials, 321, 126371. https://doi.org/10.1016/j.conbuildmat.2022.126371.
  55. Ebrahimi, K., Daiezadeh, M.J., Zakertabrizi, M., Zahmatkesh, F., Korayem, A.H. (2018). A review of the impact of micro-and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective. Construction and Building Materials, 186, 1105-1113. https://doi.org/10.1016/j.conbuildmat.2018.08.029.
  56. Mousavinezhad, S., Gonzales, G.J., Toledo, W.K., Garcia, J.M., Newtson, C.M., Allena, S. (2023). A comprehensive study on non-proprietary ultra-high-performance concrete containing supplementary cementitious materials. Materials, 16(7), 2622. https://doi.org/10.3390/ma16072622.
  57. Gudimettla, J., Crawford, G. (2016). Resistivity tests for concrete-recent field experience. ACI Materials Journal, 113(4), 505-512. https://doi.org/10.14359/51688830. 
  58. Thomas, M.D.A., Hooton, R.D., Scott, A., Zibara, H. (2012). The effect of supplementary cementitious materials on chloride binding in hardened cement paste. Cement and Concrete Research, 42(1), 1-7. https://doi.org/10.1016/j.cemconres.2011.01.001.
  59. De Belie, N., Soutsos, M., Gruyaert, E. (2018). Properties of fresh and hardened concrete containing supplementary cementitious materials, Vol. 25, Springer, Cham, Switzerland.
  60. Ahmadi, Z., Esmaeili, J., Kasaei, J., Hajialioghli, R. (2018). Properties of sustainable cement mortars containing high volume of raw diatomite. Sustainable Materials and Technologies, 16, 47-53. https://doi.org/10.1016/j.susmat.2018.05.001.
  61. Poon, C.S., Kou, S.C., Lam, L. (2006). Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete. Construction and Building Materials, 20(10), 858-865. https://doi.org/10.1016/j.conbuildmat.2005.07.001.
  62. Kawabata, Y., Takahashi, H., Watanabe, S. (2021). The long-term suppression effects of fly ash and slag on the expansion of heat-cured mortar due to delayed ettringite formation. Construction and Building Materials, 310, 125235. https://doi.org/10.1016/j.conbuildmat.2021.125235.
  63. Elahi, M.M.A., Shearer, C.R., Reza, A.N.R., Saha, A.K., Khan, M.N.N., Hossain, M.M., Sarker, P.K. (2021). Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): a review. Construction and Building Materials, 281, 122628. https://doi.org/10.1016/j.conbuildmat.2021.122628.
  64. Tafraoui, A., Escadeillas, G., Lebaili, S., Vidal, T. (2009). Metakaolin in the formulation of UHPC. Construction and Building Materials, 23(2), 669-674. https://doi.org/10.1016/j.conbuildmat.2008.02.018.
  65. Al-Akhras, N.M. (2006) Durability of metakaolin concrete to sulfate attack. Cement and Concrete Research, 36(9), 1727-1734. https://doi.org/10.1016/j.cemconres.2006.03.026.
  66. Bahmani, H., Mostofinejad, D. (2022). Microstructure of ultra-high-performance concrete (UHPC)-a review study. Journal of Building Engineering, 50, 104118. https://doi.org/10.1016/j.jobe.2022.104118.
  67. Li, Z. (2016). Drying shrinkage prediction of paste containing meta-kaolin and ultrafine fly ash for developing ultra-high performance concrete. Materials Today Communications, 6, 74-80. https://doi.org/10.1016/j.mtcomm.2016.01.001.
  68. Jensen, O.M., Lura, P. (2006). Techniques and materials for internal water curing of concrete. Materials and Structures, 39, 817-825. https://doi.org/10.1617/s11527-006-9136-6.
  69. Ideker, J.H., Fu, T., Deboodt, T. (2013). Development of shrinkage limits and testing protocols for ODOT high performance concrete. Federal Highway Administration, 400 Seventh Street, SW, Washington, DC 20590-0003.
  70. Banar, R., GivKashi, M.R., Ramezanianpour, A.M. (2025). Life cycle sustainability assessment of eco-friendly self-consolidating concretes using expert insights from the construction industry. Scientific Reports, 16, 4077. https://doi.org/10.1038/s41598-025-34276-w.
  71. Mohammadi, A., Ramezanianpour, A.M. (2023). Investigating the environmental and economic impacts of using supplementary cementitious materials (SCMs) using the life cycle approach. Journal of Building Engineering, 79, 107934. https://doi.org/10.1016/j.jobe.2023.107934.