DOI QR코드

DOI QR Code

Development of a SketchUp-Based PV System Layout and Decision Support Tool for Zero-Energy Building Planning in the Early Design Stage

초기 설계 단계의 제로에너지 건축물 계획을 위한 SketchUp 기반 PV 시스템 배치 및 의사 결정 지원 도구 개발

  • 박준환 (목원대학교 일반대학원 건축학과) ;
  • 백승효 (목원대학교 건축학부)
  • Received : 2026.03.11
  • Accepted : 2026.05.14
  • Published : 2026.09.30

Abstract

Existing photovoltaics (PV) performance evaluation tools typically require expert-level engineering knowledge, limiting their effectiveness in supporting decision-making for Zero Energy Building (ZEB) implementation during the early design stage-a phase characterized by frequent modifications. To address this, this study developed a PV Planning Support Tool within the SketchUp environment to automatically generate placement plans based on user-defined target energy supply rates. To implement this tool, two core algorithms were developed: a Maximum Placement Algorithm that calculates the maximum installable capacity on the building envelope, and a Target Energy Supply Rate-based Optimal Placement Algorithm that optimizes the arrangement using the minimum modules required to meet the target. Furthermore, a C++/CUDA-based GPU acceleration engine was developed to handle large-scale computations for hourly shading and power generation analysis, ensuring high responsiveness by providing feedback within seconds. To verify the tool's utility, 20 design alternatives created by architecture majors for a site in Seoul were analyzed with a target energy supply rate of 20%. The results demonstrated that the tool successfully derived placement plans within a 20-21% energy supply range for all designs. The number of modules per gross floor area averaged 0.11 modules/m2 with a deviation of approximately 2%, confirming the tool's capability to provide consistent and reliable placement planning across diverse architectural forms.

기존의 PV 시스템 성능 평가 도구들은 전문 엔지니어 수준의 지식을 요구하며, 빈번한 디자인 수정이 발생하는 초기 설계 단계에서 제로에너지 건축물 구현을 위한 의사결정을 지원하기에는 한계가 있다. 이를 보완하기 위해 본 연구에서는 건축 실무에서 보편적으로 활용되는 SketchUp 환경 내에서 건축가가 설정한 목표 자립률 가능한 PV 시스템 배치안을 자동 생성하는 PV planning support tool을 개발하였다. 해당 도구를 구현하기 위해 대상 건물의 외피에 설치 가능한 최대 용량을 산정하는 최대 배치 알고리즘과 목표 자립률을 달성하는 범위 내에서 최소한의 모듈수로 자동 배치하는 목표 자립률 기반 최적 배치 알고리즘을 각각 구현하였다. 이때, 대규모 연산이 요구되는 시간 단위 음영 및 발전량 계산을 위해 C++/CUDA 기반의 GPU 가속 엔진을 개발함으로써, PV 시스템 배치안 생성 및 수정에 따른 성능 평가 결과를 즉각적으로 제시할 수 있도록 하였다. 개발된 도구의 유용성을 검증하기 위해 서울시 망원동에 위치한 부지를 대상으로 건축 관련 전공자 20인이 작성한 설계안에 대해 목표 자립률 20%를 만족하는 PV 시스템 배치안을 생성 및 분석하였다. 그 결과, 모든 설계안에서 에너지 자립률 20~21% 범위를 만족하는 배치안을 도출하였으며, 연면적 대비 모듈수의 경우 평균 0.11장/m2로 약 2%의 편차를 나타내어 다양한 설계 형상에서도 일관성 있는 배치 계획이 가능함을 확인하였다.

Keywords