Journal of Positioning, Navigation, and Timing
The Institute of Positioning, Navigation, and Timing (IPNT)
- Quarterly
- /
- 2288-8187(pISSN)
- /
- 2289-0866(eISSN)
Aim & Scope
Topics suitable for publication includes GNSS system architecture, signal structure, signal structure, signal processing algorithms, receiver technologies, augmentations systems, complementary systems, and all applications such as scientific, geodesy, surveying, military and PNT(Position, Navigation and Time) of land, maritime, aero and space vehicles.
http://ipnt.jams.or.kr/ KCIVolume 15 Issue 3
-
The global navigation satellite system (GNSS) has become an essential infrastructure for positioning, navigation, and timing (PNT) services, yet it remains vulnerable to jamming, spoofing, and signal blockage in urban environments. Low Earth Orbit (LEO) communication satellite signals can be passively used for positioning based on Signals of Opportunity (SOP) to complement GNSS, with the advantages of high signal strength and wide coverage. In SOP operation, however, only public ephemeris such as Two-Line Element (TLE)/Simplified General Perturbations 4 (SGP4) is available to the user, and the resulting kilometer-level orbital errors limit positioning performance - particularly over long baselines where differential techniques alone cannot mitigate the error. This paper investigates the feasibility of orbital error compensation combined with differential positioning techniques in LEO-SOP environments, using the Starlink constellation as the target. Orbital and velocity errors between TLE/SGP4 and Starlink ephemeris/High Precision Orbit Propagator (HPOP) are quantified in the Earth-Centered Earth-Fixed (ECEF) frame, and their dominant periodicities are identified via Fast Fourier Transform (FFT) analysis. A Kalman filter with harmonic terms and coefficient rates as state variables is then designed to estimate and compensate the errors in real time, and differential models for Doppler measurements are applied over short and long baselines (6.53 km and 100.31 km). Simulation results show that the proposed compensation model reduces kilometer-level orbital errors to a few meters and velocity errors from several m/s to a few cm/s while remaining effective under one-minute packetized correction updates. In the LEO-SOP positioning scenario, the Doppler-based single point positioning (SPP) horizontal root mean square (RMS) error is reduced from approximately 3.1 km to about 23 m after compensation, and the compensated differential positioning converges to approximately 32-34 m horizontal RMS for both short and long baselines. The substantial mitigation of baseline-length sensitivity after compensation, together with the resulting positioning level, indicates the feasibility of using LEO-SOP as an Alternative PNT (APNT) source.
-
Jaeo Song;Dohun Kim;Yongtaek Hwang;JaeHee Noh;Hoyoung Yoo 253
Tropospheric delay in Global Navigation Satellite System (GNSS) signals is a non-dispersive error that cannot be eliminated using frequency combinations alone and is affected by meteorological factors such as atmospheric pressure, temperature, and water vapor pressure. Satellite-Based Augmentation Systems (SBAS) define a tropospheric delay correction model that can be applied without real-time meteorological information. However, the conventional parameters in the SBAS model are based on global empirical values and therefore have limitations in sufficiently reflecting regional meteorological characteristics. In this study, a regional optimization method based on Stochastic Gradient Descent (SGD) is proposed to derive regional parameters for the SBAS tropospheric delay correction model using Zenith Total Delay (ZTD) products provided by the International GNSS Service (IGS) as reference values. As a regional application, the proposed method was applied to the Korean Peninsula, and 20 meteorological parameters at reference latitudes of 30°N and 45°N were selected as optimization targets. The parameters are iteratively updated to minimize the mean square error between the ZTD calculated by the SBAS model and the IGS ZTD. IGS ZTD data from 2021 to 2024 were used for training and data from 2025 were used for validation. The validation results show that the model with optimized parameters reduced the overall mean bias from 26.643 mm to 1.286 mm, STD from 70.208 mm to 58.901 mm, and RMS from 75.094 mm to 58.915 mm compared with the conventional SBAS model, achieving an RMS improvement of 21.545%. These results indicate that the proposed method can improve the regional applicability of the SBAS tropospheric delay correction model by optimizing its parameters using IGS ZTD data while maintaining the structure of the conventional model. -
Eun Ji Ha;Jang Hwan Shin;JaeHee Noh;Sung Kyun Jang;Jae Min Ahn 265
This paper analyzes the effect of frequency offset caused by Doppler shifts on the cross-correlation power distributions of pseudo-random noise (PRN) codes in Global Navigation Satellite Systems (GNSS). Global Positioning System (GPS) L1C and GPS L1 C/A codes were considered in the analysis. The normalized cross-correlation power at an arbitrary relative code delay was modeled using chi-square distributions with one degree of freedom in the absence of frequency offset and two degrees of freedom in its presence. To investigate this effect, the Even and Odd Cross-correlation Functions (CCF) of GPS L1C and GPS L1 C/A code pairs were compared with those of binary random code pairs of the corresponding lengths, both with and without frequency offset. In the absence of frequency offset, the Even and Odd CCF powers of GPS L1C codes and the Even CCF power of GPS L1 C/A codes were lower than those of the corresponding binary random codes. The Odd CCF power of GPS L1 C/A codes, however was similar to that of the binary random codes. When frequency offset was present, the cross-correlation power decreased for the Even and Odd CCFs of GPS L1C codes and the Odd CCF of GPS L1 C/A codes, but increased for the Even CCF of GPS L1 C/A codes. In all cases, the differences in the cross-correlation power distributions between the GPS codes and the corresponding binary random codes were reduced. These results show that frequency offset does not always degrade cross-correlation characteristics and that its effect depends on the code structure and CCF type. These findings suggest that considering the statistical characteristics under frequency-offset conditions may enhance flexibility in PRN code design. -
Minyong Choi;Jinseok Kim;Il Kyu Kim;Hung Seok Seo;Young Baek Kim 279
With the emergence of Low Earth Orbit (LEO)-based Positioning, Navigation, and Timing (PNT) systems, ensuring coexistence with existing Global Navigation Satellite Systems (GNSS) has become a critical challenge. While prior studies have demonstrated system-level compatibility between LEO PNT and GNSS signals through theoretical interference analysis and hardware-based validation, the impact of LEO signals on receiver-level signal processing has not been fully investigated. In this paper, we present a receiver-level coexistence analysis by generating a single digital intermediate-frequency (IF) signal that combines Pulsar LEO PNT (Pulsar X1) and Global Positioning System (GPS) L1 C/A signals under realistic conditions. The proposed approach does not rely on artificial frequency alignment or time synchronization, enabling a more practical representation of real-world signal environments. The composite IF signal is processed using a Software-Defined Receiver (SDR), and the acquisition and tracking performance of both signals are evaluated under various channel configurations and power conditions. Experimental results show that the GPS L1 C/A signal maintains stable tracking performance with carrierto-noise density ratio (C/N0) variations within 0.1 dB compared to the GPS-only baseline even when the Pulsar X1 signal is up to 20 dB stronger. These results indicate minimal receiver-level interference. Furthermore, the results reveal that performance variations are primarily driven by multi-signal processing effects rather than inter-system interference. These findings provide a detailed receiver-level characterization of GNSS-LEO coexistence and offer important insights for the design and implementation of future multi-constellation GNSS/LEO PNT receivers. -
This paper proposes a three-dimensional (3D) indoor positioning algorithm based on a single-transmitter module combined with a Round Trip Time (RTT) module. Studies on indoor positioning systems based on a single transmitter have generally been limited to two-dimensional (2D) positioning due to the assumption of constant user height. However, this assumption does not hold in practical environments where users move vertically via stairs or escalators. To address this limitation, the proposed method incorporates RTT-based ranging information to improve vertical observability and enable 3D positioning. In addition, the algorithm estimates both the user height and RTT bias simultaneously, even in the presence of turn-on bias in practical RTT measurements. Simulation results demonstrate that the proposed method achieves a 3D positioning accuracy of approximately 0.38 m in complex indoor environments involving vertical movement. Furthermore, the RTT bias is successfully estimated close to its actual value, validating the feasibility of the proposed approach. These results indicate that the proposed method can effectively overcome the geometric limitations of single-transmitter systems and provide reliable 3D indoor positioning performance.
-
In indoor localization based on Wi-Fi fingerprinting, the linear-decay similarity function (LDF) framework has demonstrated high positioning accuracy in stable radio environments. However, the linear attenuation characteristic of LDF causes similarity scores to rapidly decrease under signal fluctuations, particularly in weak Received Signal Strength Indicator (RSSI) regions. This discontinuous truncation affects the similarity response in the presence of signal discrepancies. To address this issue, this paper introduces the Bivariate Gaussian Similarity Function (BGF) model, which adopts a continuous similarity metric based on a bivariate Gaussian probability density function. Where reference and query signal values match, BGF forms a non-linear, continuous bivariate Gaussian similarity surface. This structure provides a continuous similarity response without abrupt truncation of similarity scores. Furthermore, the proposed similarity function produces similarity response patterns that differ from those of LDF under signal discrepancy conditions. Comprehensive evaluations using the public UJIIndoorLoc dataset showed that the proposed model reduced the mean positioning error from 5.97 m to 5.68 m in the internal evaluation set (I-Set) and from 10.00 m to 9.49 m in the external evaluation set (G-Set). In addition, a localized case study conducted in Building 2, Floor 4, where relatively high RSSI variability was observed, showed that the mean positioning error decreased from 12.16 m to 9.23 m. A spatial error map analysis further indicated lower positioning errors in several regions under the proposed model. These results suggest an association between the similarity response characteristics of the proposed similarity function and the observed positioning error distributions under signal discrepancy conditions.
-
This study quantitatively evaluates the potential mutual interference between a newly developed regional satellite navigation system and existing Radio Navigation Satellite Service (RNSS) systems. The analysis focuses on the L1, L2, and L5 bands and is conducted based on the International Telecommunication Union (ITU)-R M.1831-1 recommendations, using the spectral separation coefficient and carrier-to-noise density ratio (C/N0) degradation as evaluation metrics. The results show that the new regional system signals, designed for civilian services, partially overlap with other civilian signals in the same frequency bands, while maintaining clear spectral separation from the restricted service signals of existing RNSS systems. The C/N0 degradation is limited to approximately 0.6 dB even under complete spectral overlap and remains below 0.1 dB for spectrally separated signals. These results suggest that the introduction of the new regional system ensures interoperability while maintaining compatibility with existing RNSS systems.
-
This paper proposes an efficient joint optimization method for stereo camera calibration parameters and multiple feature point coordinates using a planar chessboard target. The proposed method detects chessboard corners from synchronized left and right stereo images and estimates their initial three-dimensional (3D) coordinates through linear triangulation. The intrinsic parameters of both cameras, lens distortion coefficients, inter-camera extrinsic parameters, and 3D chessboard feature coordinates are then jointly refined in a single linearized optimization framework. Experimental results using directly acquired stereo image pairs show that the proposed method maintains sub-pixel reprojection accuracy and reduces reprojection error variation over most of the evaluated distance conditions. The proposed framework can serve as a practical calibration approach for stereo vision systems requiring stable geometric reconstruction.
-
Hee-Yang Jung;Dong-Hee Paek;Woo-Jin Jung;Seung-Hyun Kong 341
Frequency estimation is estimating individual tone frequencies from noisy multi-tone sinusoidal signals. Accurately estimating both the number of tone frequencies and the individual tone frequencies in low signal-to-noise ratio (SNR) environments with existing frequency methods is challenging, because weak tone frequency components are buried in noise. In addition, existing methods generally exhibit a trade-off between robustness at low SNR and frequency estimation precision at high SNR, and consequently it is difficult to achieve consistently superior frequency estimation performance over a wide SNR range. To overcome these limitations, this paper proposes an SNR-adaptive frequency estimator (SAFE). SAFE consists of a time-frequency image neural network (TFINet), which enhances weak tone frequency components at low SNR, and an SNR-based frequency selector (SFS), which selects an appropriate frequency estimator according to the SNR of the estimated tone frequencies. TFINet enhances tone frequency components even in the low-SNR range, while SFS estimates the SNR of each tone frequency and selects either a robust frequency estimator or a super-resolution frequency estimator according to the estimated SNR. SAFE can thereby achieve robustness at low SNR while preserving high precision at high SNR. Simulation results show that SAFE achieves a False Negative Rate (FNR) of 13.00% over the SNR range from -10 dB to 0 dB, corresponding to a 13.04% improvement over the state-of-the-art method. In addition, SAFE reduces the Nearest Neighbor-Root Mean Squared Error (NN-RMSE) by 56.67% compared with the state-of-the-art method, thus demonstrating that it performs more accurate frequency estimation. Furthermore, experiments using real-world data demonstrate that SAFE provides robust frequency estimation performance even in practical environments with clutter. -
Low Earth Orbit (LEO) satellites are increasingly considered key platforms for next-generation satellite communication and space-based sensing systems, because they can provide communication, surveillance, navigation, and positioning services in areas where terrestrial infrastructure is unavailable or limited. However, LEO satellite systems are subject to practical constraints such as rapid channel variation, Doppler shifts, limited onboard power, restricted antenna installation space, beam alignment errors, and multiple interference signals. Under these constraints, the low-complexity Angle-of-Arrival (AOA) estimation is essential for satellite beamforming, interference avoidance, user positioning, inter-satellite link alignment, and ground station tracking. Orthogonal array (OA) antennas, including L-shaped, T-shaped, and cross-shaped arrays, are promising structures for satellite-mounted AOA estimation systems, because they can estimate two-dimensional angular information with a limited number of physical antenna elements. Although existing OA-based studies have mainly focused on improving final AOA/Direction-of-Arrival (DOA) with estimation accuracy, angular resolution, degrees of freedom, coherent signal processing, mutual coupling mitigation, and angle pairing, the Region of Interest (ROI) detection process required for low-complexity cascade AOA estimation has not been sufficiently investigated. In this paper, we analyze Capon spatial spectrum-based ROI detection for the cascade AOA estimation using OA antennas. In particular, the effects of active element selection strategies on ROI detection performance are quantitatively evaluated in terms of ROI inclusion rate, false ROI occurrence rate, ROI area ratio, search-space reduction ratio, and threshold sensitivity. The analysis clarifies how the position and distribution of active elements along the orthogonal axes affect the reliability of ROI detection and the efficiency of low-complexity AOA search.
-
Covert spoofing technology, which injects counterfeit signals into Global Navigation Satellite System (GNSS)/ Inertial Navigation System (INS) integrated navigation systems to hijack and redirect a target vehicle to a desired target, recently has been gaining significant attention as a means of countering the threat of Unmanned Aerial Vehicle (UAV). However, existing spoofing techniques require prior knowledge of the UAV's internal navigation parameters or flight trajectory. In practical scenarios, such internal information is strictly inaccessible to the spoofer. To address this issue, this paper presents a covert spoofing framework that employs a dual-concealment reward in Soft Actor-Critic (SAC), a maximum entropy reinforcement learning algorithm. During training, the proposed method uses the Normalized Innovation Squared (NIS) calculated by the UAV and the NIS predicted by radar simultaneously. During the inference phase, the agent relies solely on the radar-predicted NIS using the learned policy to successfully guide the UAV to the desired location of the defender. Simulation results across 1,000 inference trials demonstrate that the proposed method achieves a remarkable guidance success rate of 97.3%, validating its covertness and robust effectiveness in black-box UAV environments.
-
Jonghyeon Kim;Haeram Kim;Boseong Kim;Sungmin Park;Beomju Shin 381
In this paper, we propose a mobile robot-based radio map construction method to reduce the manual site survey burden required for fingerprinting-based indoor localization. The proposed method generates a Simultaneous Localization and Mapping (SLAM) map through frontier-based autonomous exploration using a mobile robot and constructs a radio map by simultaneously collecting the robot's position information and Bluetooth Low Energy (BLE) Received Signal Strength Indicator (RSSI) data during waypoint navigation. In the experiment, mobile robot-based and Pedestrian Dead Reckoning (PDR) based radio maps were constructed on the sixth floor of the Hallym University main building, and their localization performance was compared using the k-Nearest Neighbors (k-NN) algorithm. The experimental results showed that the mobile robot-based radio map achieved lower localization errors over most of the error distribution, whereas the PDR-based radio map exhibited a slightly lower maximum error. Overall, the proposed method achieved localization performance comparable to that of the conventional PDR-based approach while reducing the manual effort required for radio map construction. -
Global Navigation Satellite System (GNSS) spoofing attacks often rely on signal power advantages to capture receiver tracking loops, making Carrier-to-Noise density ratio (C/N0) a useful indicator for detection, especially in stationary receivers where motion-based validation is not applicable. However, C/N0 inherently exhibits significant variations due to environmental effects such as ionospheric scintillation and multipath effects and satellite geometry changes, which may obscure spoofinginduced anomalies. In addition, correlation distortion-based detection methods show limited performance under near-synchronous spoofing conditions. To address these limitations, this paper proposes a C/N0 based spoofing detection method that extends the previous study, "A Study on C/N0 Based GNSS Spoofing Detection Considering the GNSS-Environmental Characteristics of the Korean Peninsula," by incorporating multi Off-Prompt correlator structures and more realistic GNSS signal modeling. Time-varying C/N0 trends are generated using Two line elements (TLE)-based satellite orbit information, with transmit power levels matched to the Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) Satellite Transmit Power: Update for IGS repro3, and expanded to 1 ms resolution for receiver-level processing. The nominal condition (H0) includes scintillation-induced C/N0 variations and multipath effects. The spoofing condition (H1) is modeled by adding spoofing signals with a small code delay of 0.1 chip and power advantages of +1, +2, and +3 dB, while also considering multipath effects. A zero-degree relative phase offset is used to represent a sophisticated phase-aligned spoofing attack, and additional phase offsets are examined to evaluate detection sensitivity. The estimated C/N0 sequence is used as input to a time-series C/N0 based spoofing detector with adaptive thresholding. Simulations show Area Under the ROC Curve (AUC) values above 0.9 for all Pseudo Random Noise (PRNs) except at relative phase offsets of ±90°, while maintaining robust performance compared with correlation distortion-based methods under near-synchronous spoofing.
-
Seongyeol Park;Seongkwon Yoon;Sanghun Im;Jaeil Park;Sunwoo Kim 405
This paper addresses the spurious intersection problem caused by Line-of-Bearing (LOB) crossings in Angle-of-Arrival (AoA)-based multi-target localization under a half-plane surveillance geometry. In this geometry, limited LOB crossing angles can cause even small AoA errors and sensor-position errors to significantly spread intersection clusters along the range direction. To address this problem, this paper refines candidate intersections generated from LOBs accumulated over multiple snapshots using Minimum-K preprocessing and density-based clustering based on the Mahalanobis distance. Sensor-specific representative LOBs are then reconstructed from the original LOB information and used in a common position estimator based on Weighted Least Squares (WLS). In this process, point-wise intersection clustering results are transformed into line-wise representative LOB sets, directly linking intersection refinement to final position estimation. Simulation results show that the proposed pipeline suppresses false clusters better than compared clustering methods and maintains the number of clusters close to the actual number of targets under dense-target and mixed near/far-target conditions, thereby improving distance-threshold-based localization performance. -
Fast initial positioning in Global Navigation Satellite System (GNSS) receivers, commonly referred to as Time-To-FirstFix (TTFF), is a key performance metric determined by signal acquisition, synchronization, and navigation message decoding processes. Among these components, Time-To-First-Fix-Data (TTFFD), which represents the time required to acquire navigation data, is one of the dominant factors affecting overall TTFF performance. As GNSS applications continue to expand, the demand for rapid navigation solution availability has steadily increased, leading to extensive research on techniques to reduce TTFF. For example, signals such as Global Positioning System (GPS) L1C employ secondary code over code sequences to enable frame synchronization simultaneously with code acquisition. This structure improves navigation message performance, especially in terms of timeliness. However, such approaches have limited applicability to existing message structures and tend to increase signal complexity and computational burden. In this paper, we propose a time-state-based signal structure that mitigates time ambiguity without relying on secondary codes, under the assumption that coarse time information is available within a bounded uncertainty range. The proposed method introduces a code-level time-state representation, in which the receiver determines the current time-state by comparing time-varying segments of the primary code within a constrained set of candidate time hypotheses following initial acquisition. This enables early identification of frame or packet boundaries without secondary codes and thereby reduces synchronization delay while maintaining structural simplicity and design flexibility. The proposed method is evaluated in terms of TTFFD performance through simulations. Results show that synchronization delay is reduced compared to existing signal structures, and that TTFFD performance comparable to secondary-code-based approaches can be achieved under coarse time assistance. This work presents a conceptual signal design approach for reducing TTFFD using code-level time-state representation.
-
Although the global navigation satellite system (GNSS) provides reliable positioning in outdoor environments, its performance significantly degrades in GNSS-denied environments. Pedestrian dead reckoning (PDR) enables continuous pedestrian positioning without external infrastructure. However, positioning accuracy rapidly decreases because of accumulated errors. This paper proposes a map-matching technique based on 1.5D-PDR movement characteristics for estimating the trajectories of smartwatch wearers. Instead of continuously estimating two-dimensional positions, the proposed 1.5D-PDR represents pedestrian movement using travel distance and turning information Human activity recognition (HAR) is employed to identify walking segments. Step detection, stride length estimation, and turn detection are then performed to generate the 1.5D-PDR movement characteristics. The pedestrian road map is modeled as a node-edge graph. Candidate trajectories are initialized from the starting location and iteratively evaluated based on the movement characteristics and the topological connectivity of the map. Inconsistent candidate trajectories are eliminated until the final estimated trajectory is obtained. Experimental results in real urban environments demonstrate that the proposed technique accurately reconstructs pedestrian trajectories under various walking conditions.
-
Seunghyeon Yoo;Boseong Kim;Sejeong Cho;Beomju Shin 437
Indoor positioning methods based on radio maps, such as Surface Correlation (SC) and fingerprinting, require dense and reliable RF measurements to construct an accurate map. However, conventional smartphones rely on a single wireless interface and limited Wi-Fi scanning. This makes it difficult to collect sufficient measurements across all channels used in an indoor environment. This paper presents a high-speed multi-band data collector that simultaneously acquires 2.4 GHz and 5 GHz Wi-Fi Received Signal Strength Indicator (RSSI) measurements together with inertial measurement unit data for Pedestrian Dead Reckoning (PDR). The 2.4 GHz channels are divided among multiple scanning modules operating in parallel, while a separate monitor-mode adapter collects signals across the 5 GHz band, including dynamic frequency selection channels. The collected RSSI and Inertial Measurement Unit (IMU) data are used to construct a radio map through floor-plan scaling and metric coordinate transformation, PDR-based trajectory estimation and map matching, reference point (RP) definition, and RSSI mapping. In addition, SC, which was previously validated using Bluetooth Low Energy (BLE) signals, is extended to Wi-Fi RSSI-based indoor positioning. In a data collection experiment, the proposed collector missed only 3 of 435 access points (0.7%) at 2.4 GHz and 1 of 267 access points (0.4%) at 5 GHz detected by a smartphone, while additionally detecting 51 and 127 access points, respectively, that the smartphone failed to capture. A radio map was also constructed in a long corridor-type building, and its indoor positioning performance was evaluated using SC. The results demonstrate that the proposed collector and radio map construction method enable dense and reliable RF data acquisition and can be effectively applied to SC-based indoor positioning. -
Low Earth Orbit (LEO) satellite constellations have emerged as a promising platform for communication and navigation services owing to benefits related to their low altitude, such as low deployment cost and strong received signal power. Additionally, the rapid motion of LEO satellites provides geometric diversity that GNSS lacks and enables LEO-based navigation to complement GNSS. However, LEO constellations currently operating for communication services do not broadcast ranging information. To address this, previous studies have exploited Doppler shift measurements for LEO signal-of-opportunity (SoP) positioning and have focused primarily on developing position estimation algorithms. Among these, earlier studies modeled the measurement error as identically and independently distributed white Gaussian noise across all visible satellites, while a recent study considered only the receiver tracking error as a function of elevation angle, excluding other error sources. This limits accurate assessment of the expected performance. Accordingly, this study comprehensively analyzes the error sources of LEO Doppler measurements and proposes a standard deviation model for each. The error sources are classified into three categories. The first is the signal-in-space error, arising from the uncertainty of the satellite state estimates. This error is modeled based on linearization of the Doppler measurement equation with respect to the satellite states. The second category is the residual propagation error remaining after ionospheric and tropospheric corrections, which is modeled by assuming a Gaussian autocorrelation function for the temporal correlation of the residual delay. The third is the user error, comprising multipath and receiver noise. The multipath error model is derived in the same manner as the propagation error model, and the receiver noise model is adopted from prior work. Based on these models, the positioning performance is evaluated using the Starlink constellation for both LEO-only SoP navigation and its combination with GPS. For LEO-only SoP navigation, the average three-dimensional position error standard deviation is approximately 16.08 m, and augmenting GPS with LEO SoP Doppler measurements reduces the GPS-only position error by 38.8% on average.
-
Global Navigation Satellite System (GNSS) signals are often unavailable indoors, and pseudolites provide carrier-phase measurements for indoor positioning. Periodic pulsing mitigates the near-far problem and inter-channel interference but creates repeated Doppler peaks. In indoor multipath, changes in effective signal strength can alter peak ranking, causing conventional maximum-peak acquisition to initialize tracking outside the pull-in range. This paper proposes a software-defined radio (SDR)-based max-peak-centered multi-peak acquisition algorithm. The suggested algorithm retains the maximum peak as an anchor, selects additional candidates at the spacing determined by the pulse repetition period, and tracks them in parallel. The candidate achieving navigation frame synchronization is selected as the true Doppler candidate. Recorded intermediate frequency data from five pulsed pseudolites at 16 indoor grid points were reprocessed with N = 1, 3, 5, and 7. Frame synchronization increased from 58/80 at N = 1 to 77/80 at N = 5, and points with fewer than four synchronized signals decreased from seven to zero. At N = 7, success did not improve despite that cumulative candidate channels increased from 430 to 538, thus indicating that N = 5 was sufficient. The method requires only receiver-side processing and can improve carrier-phase availability without transmitter or RF modifications.
-
Ahmad Mohamad Boynawan;Myoung-Sun Heo;Dai-Hyuk Yu 473
In this work, the performance of two optical time and frequency transfer techniques, Electronically Stabilized Time and Frequency Distribution (ELSTAB) and White Rabbit (WR), was evaluated side by side between the Korea Research Institute of Standards and Science (KRISS) and the National Geographic Information Institute (NGII) using an installed optical fiber path of approximately 50 km. Over the installed optical fiber network, the ELSTAB frequency and time transfer stability is estimated to be less than 2 × 10-13 and 40 ps at 1 s, respectively. Corresponding stabilities of the WR reached 3.8 × 10-12 and similar 40 ps at 1 s, respectively. Although the frequency stability of WR was inferior to that of ELSTAB, WR provided sub-nanosecond-level timing performance with practical Ethernet-based scalability, making it suitable for operational timing distribution and network synchronization. ELSTAB remains the preferred technique when the highest frequency-transfer stability is required. The results also confirm that both fiber-based systems can operate over the 50 km KRISS-NGII optical fiber link without optical amplification. -
The accuracy of real-time localization directly affects the performance and stability of mobile systems such as mobile robots, drones, and automobiles. Major sources of real-time localization error include the approximation of nonlinear process and measurement models and observation losses due to failures in data transmission and reception. In this paper, focusing on continuous data loss that occurs during real-time localization, we propose a state estimation algorithm that is robust to data loss. The proposed algorithm estimates position changes by calculating the average position change from the most recent N position estimates. It then uses the estimated position as an auxiliary measurement when data loss occurs and measurement updates cannot be performed. To verify the robustness of the proposed algorithm under data-loss conditions, performance evaluations were conducted through simulations that compare the proposed algorithm with the unscented Kalman filter and trilateration under both data-loss and loss-free conditions. The results of the simulations show that the proposed algorithm is more robust than the other state estimation algorithms under data-loss conditions.
-
This study evaluates the time-of-arrival (TOA) stability of a commercial UrsaNav UN-152B receiver under three reference clock conditions: a free-running internal oven-controlled crystal oscillator (INT) and two GPS-disciplined oscillators, the rubidium-based SpectraTime GPSReference-2000 (GPSRef ), and the temperature-compensated crystal oscillator-based Leo Bodnar LBE-1425 (LBE). With the antenna, cabling, and receiver settings identical and clock steering disabled, more than 24 h of 9930M data from the Pohang eLoran transmitter were collected for each of the three reference clock conditions on separate days. A common 23 h local-time-aligned interval was analyzed using a segment-wise trend model, overlapping Allan deviation (OADEV), and time deviation (TDEV). INT exhibited a TOA change of approximately 5.7 ㎲ over 23 h, whereas the changes under GPSRef and LBE were 0.11 ㎲ and -0.014 ㎲; a long-term trend was resolved only for INT. Over τ = 10-1,000 s the three OADEV curves differed by less than a factor of 1.7, and the TOA-based values exceeded the manufacturer specifications of the external references by factors of 27-450, indicating substantial contributions from receiver processing, propagation, and other measurement-chain effects. Although LBE did not show a resolvable long-term trend, it gave the largest OADEV over the main comparison range, and the three conditions converged to 3.4-3.8 ns in TDEV at τ = 1,000 s. The relative stability of the reference clock conditions therefore depends on both the evaluation metric and the observation time scale.
-
Min-Ju Kim;Jong-Sung Lee;Bong-Gyu Park;Kwan-Dong Park 497
The Dual-Frequency Multi-Constellation (DFMC) Satellite-Based Augmentation System (SBAS) is a next-generation GNSS augmentation technology developed to overcome the limitations of conventional SBAS. However, few performance evaluations of DFMC SBAS in actual open-service environments are available, as most systems are still in the test and validation phase. Since September 2022, the Southern Positioning Augmentation Network (SouthPAN) of Australia and New Zealand has provided DFMC SBAS and Precise Point Positioning (PPP) via SouthPAN (PVS) as an Early Open Service, with both services sharing the same satellite orbit and clock corrections within a common message structure. In this study, the DFMC SBAS and PVS positioning algorithms were implemented using actual SouthPAN broadcast messages and evaluated using GNSS observations from the International GNSS Service (IGS) reference station HOB2 in Australia. DFMC SBAS was evaluated for navigation applications, while PVS was evaluated under static positioning conditions for static surveying. Four processing configurations were evaluated using the same GNSS observations to assess the effects of ionospheric error handling and SouthPAN corrections and to compare the positioning characteristics of DFMC SBAS and PVS. The DFMC SBAS achieved a 3D root mean square error (RMSE) of 42 cm, with mean horizontal and vertical protection levels (HPL and VPL) of 5.45 m and 9.11 m, respectively, no misleading information (MI) events, and an availability of 99.99%. The PVS achieved a 3D RMSE of 8 cm after convergence, with a mean convergence time of 21.6 min. These results demonstrate the distinct performance characteristics of DFMC SBAS and PVS for their respective applications. -
Low Earth Orbit (LEO) constellations refer to systems composed of dozens to thousands of satellites operating at altitudes between 300 and 2,000 km, providing a wide range of services to ground users. Recent advances in nanoscale integration technologies and the development of reusable launch vehicles have opened up the possibility for developing and deploying LEO constellations. In particular, LEO satellites are gaining attention as an alternative capable of supplementing the limitations of existing Global Navigation Satellite System (GNSS) and offering more precise Positioning, Navigation, and Timing (PNT) services, due to advantages such as higher received signal power, a large number of visible satellites, and fast integer ambiguity resolution. Accordingly, major space technology powers such as the United States, Europe, and China are actively conducting research and making large scale investments in LEO PNT technologies that go beyond conventional GNSS. To respond to this global trend, South Korea also should carry out foundational research on LEO PNT related technologies and explore suitable constellation configurations and operational strategies for the domestic environment. This paper classifies LEO PNT operational approaches based on payload configuration and design method as the top-level criteria, and further subdivides them according to GNSS dependence. It also investigates and analyzes operational methods, payload configurations, and related technological trends, with a focus on overseas LEO PNT development cases.
-
Low Earth Orbit (LEO) constellations, originally developed for communication services, are increasingly being considered for Positioning, Navigation, and Timing (PNT) applications through fused communication-navigation architectures and signals of opportunity. This paper analyzes satellite geometry and link characteristics relevant to the PNT applicability of operational commercial LEO constellations, such as Starlink and OneWeb, using an observation site in Incheon, Republic of Korea. Under an idealized wide-beam transmission assumption, publicly available constellation and operational parameters are reflected, and visible satellite numbers, skyplot distributions, dilution of precision (DOP), line-of-sight (LOS) relative velocity, Doppler shift, and free-space path loss (FSPL) are compared with the Global Positioning System (GPS). The results show that dense LEO constellations can provide improved visibility and favorable geometric characteristics, while the shorter LOS distance of LEO satellites can reduce FSPL. However, rapid satellite motion, short visibility duration, steep elevation angle variation, and large Doppler variation impose challenges for receiver acquisition, tracking, and signal processing.
-
This paper presents a preliminary design and performance analysis of a Korean Low Earth Orbit (LEO) Positioning, Navigation, and Timing (PNT) constellation optimized for regional coverage. Key space segment design parameters, including the number of satellites, orbital planes, and inclination, are systematically analyzed to evaluate their impact on geometric performance. Based on this analysis, a Walker Delta constellation with 240 satellites, eight orbital planes, and 55° inclination is proposed to ensure full coverage over the Korean region with a minimum of four visible satellites and GDOP below 6. A link budget analysis shows that LEO systems can achieve higher received signal power and C/N0 than GPS due to reduced propagation loss, while a Doppler analysis reveals significantly larger frequency shifts and variation rates. These results demonstrate the feasibility of LEO PNT while highlighting the need for advanced receiver and signal design.
-
Satellite navigation (GNSS)-based Positioning, Navigation, and Timing (PNT) information has become a core national infrastructure underpinning not only defense but also society and the economy as a whole. Recently, jamming and spoofing incidents against satellite navigation have surged in the real world and the threat is no longer theoretical. The United States has codified the policy concept of Navigation Warfare (NAVWAR) at the level of federal law, presidential directive, DoD instruction, and policy documents, and uses it to mandate Assured PNT. This paper introduces the legal and policy framework for NAVWAR and analyzes the Blue Force Electronic Attack (BFEA) concept, which arises from the civil/military frequency separation of GNSS signals and motivates dedicated military signal use. The paper further surveys recent trends in ground/receiver and satellite technologies developed to implement NAVWAR.
-
The Global Navigation Satellite System (GNSS), based on Medium Earth Orbit (MEO) satellites, suffers from inherently low received signal power at the ground level and structural vulnerability to jamming and spoofing. As a promising complement to these limitations, Low Earth Orbit (LEO)-based LEO-PNT systems have attracted growing interest. For these systems, the operating frequency band is one of the critical design parameters. This paper experimentally compares the reception performance and characteristics of the UHF (435 MHz) and S-band (2.4251 GHz) frequency bands using a navigation signal transmitter module developed for LEO CubeSat payloads. An identical signal structure is applied to both bands, with transmit and receive hardware configurations kept as consistent as possible to isolate the effect of the frequency band as the primary comparative variable. Two experimental scenarios are constructed: an equal effective isotropic radiated power (EIRP) condition and an equal received power condition, conducted across outdoor line-of-sight (LoS), indoor corridor, and outdoor-to-indoor environments. Under the equal EIRP condition, S-band exhibits approximately 18-20 dB lower received power than UHF in the outdoor environment. It also shows greater Carrier-to-Noise density ratio (C/N0) variability due to reflection and scattering in the indoor corridor. Under the equal received power condition, S-band suffers approximately 8 dB C/N0 degradation relative to UHF in the outdoor-to-outdoor environment, which is attributable to external interference from the ISM band. Furthermore, stable signal acquisition in the outdoor-to-indoor environment requires additional transmit gain compensation. In the outdoor-to-indoor environment, the measured wall penetration loss shows close agreement with the theoretical predictions based on ITU-R P.2040-4, confirming that S-band penetration loss exceeds that of UHF by approximately 16 dB or more under identical wall conditions.
-
This paper analyzes the impact of the number of covariance samples on anti-jamming performance and hardware complexity in real-time array antenna-based Global Navigation Satellite System (GNSS) receivers. In real-time hardware platforms such as Field Programmable Gate Arrays (FPGAs) and Application Specific Integrated Circuits, varying the snapshot size in the Sample Matrix Inversion (SMI) algorithm creates a critical trade-off between algorithmic performance gains and physical resource penalties. To investigate this effect, we evaluate the system-wide impact of the sample count through a theoretical analysis, hardware synthesis, and anechoic chamber testing. Based on the analysis, we identify an optimal snapshot range of N=32~128 that balances the target anti-jamming capabilities against hardware resource and latency constraints, establishing a practical design guideline for robust receiver architectures.
-
Hyun Ki Kim;Min Jae Kim;Jeong Won Kim;Jong-Nam Lim 571
Global Navigation Satellite System (GNSS) receivers are essential for modern navigation, yet their positioning accuracy is often degraded by ionospheric delays and interference. This paper presents the implementation of the Korea Augmentation Satellite System (KASS) correction algorithm within an anti-jamming GNSS receiver based on a four-element Controlled Reception Pattern Antenna (CRPA). By integrating digital beamforming with KASS correction data, the proposed receiver is expected to enhance positioning precision. The performance was validated through 24-hour static and vehicle-based dynamic tests. The experimental results demonstrate that KASS corrections significantly improve accuracy in both Null Steering and Beamforming modes, with the combination of Beamforming and KASS yielding the highest positioning performance. These findings verify the effectiveness of integrating KASS into anti-jamming receivers to ensure robust and precise positioning in practical environments.