• 제목/요약/키워드: %EC%B6%94%EC%B2%9C

검색결과 3건 처리시간 0.019초

SOL-GEL법을 이용한 $SrBi_2TaNbO_9$ 강유전성 박막 제조 및 특성 평가 (Fabrecation and Characterization of $SrBi_2TaNbO_9$ Ferroelectric Thin Film Prepared by Sol-Gel Method)

  • 이진한;박상준;장건익
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.94-98
    • /
    • 2000
  • Polycrystalline SBTN ferroelectric thin films were prepared by sol-gel method with various Nb mole ratios on Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperatures and characterized in terms of phase and microstructure. Relatively a well saturated hysteresis pattern was obtained at x =0.2 in S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin films. At an applied voltage of 5V, the dielectric constant ($\varepsilon$$_{r}$) and dissipation factor (tan $\delta$) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin film (x=0.2) were about 236.2 and 0.034. Measured remanent polarization (2Pr) and coercive field (Ec) were 4.28C/c $m_2$, and 38.88kv/cm respectively. No fatigue was observed up to 6$\times$10$_{10}$ switching cycles at 5V and the normalized polarization reduced by a factor of only 4%.%. 4%.%. 4%.%.%.%.%.

  • PDF

신간척지 토양에서 담수에 의한 토양염도 변화에 대한 개관 (Changes of Soil Salinity due to Flooding in Newly Reclaimed Saline Soil)

  • 유진희;;;;;;;;정덕영
    • 한국토양비료학회지
    • /
    • 제42권Spc호
    • /
    • pp.45-46
    • /
    • 2009
  • 간척지 토양은 도시화와 산업화로 인해 잠식되는 농경지를 대체하는 식량공급원으로 간척지는 쌀 산업 외에 원예, 축산 등 다양한 생물산업 기반으로 활용되고 있다. 그리고 간척지 논농업(간척지 논 307만 ha)은 온실가스 저감 기능을 가지고 있으며 년간 논 1ha당 이산화탄소 흡수량 21.9t, 산소 공급량 15.9t으로 알려져 있다. 그러나 높은 염농도와 지하수위, 지하수 상승에 의한 재염화 현상, 토양 물리화학성과 배수 불량, 논의 경우 적정 유효토심은 50cm 정도이나 간척지 논 유효토심 20cm 이하로 유효토심이 매우 낮은 편이다. 또한 간척년대 경과할수록 제염은 되나 토양물리성 불량, 시비량 과다와 양분 불균형 발생으로 인하여 수분과 양분보유능 향상 토양관리 기술 개발 필요하다.

고정배출원의 먼지 크기별 (PM, PM10, PM2.5) 배출 특성 연구 (The Characterization of PM, PM10, and PM2.5 from Stationary Sources)

  • 김종호;황인조
    • 한국대기환경학회지
    • /
    • 제32권6호
    • /
    • pp.603-612
    • /
    • 2016
  • The objective of this study was to estimate the emission characteristics for PM, $PM_{10}$, and $PM_{2.5}$ in the various stationary sources. The particulate matters collected in the various stationary sources such as power plants (Coal and B-C oil), incinerators(municipal and industrial waste), and glass furnaces. The PM and $PM_{10}$, PM and $PM_{2.5}$, $PM_{10}$ and $PM_{2.5}$ samples were collected using the cyclone type $PM_{10}$, $PM_{2.5}$ samplers and 30 species(19 inorganic species, 9 ionic species, OC and EC) were analyzed by ICP, IC, and TOR/IMPROVE methods. The mass concentrations of PM, $PM_{10}$, $PM_{2.5}$ from nine stationary sources ranged $0.63{\sim}9.58mg/Sm^3$, $0.26{\sim}7.47mg/Sm^3$ and $0.13{\sim}6.34mg/Sm^3$, respectively. The level of $PM_{10}$, $PM_{2.5}$ portion in PM calculated 0.63~0.99, 0.38~0.94, respectively. In the case of emission trend for species, power plant showed high concentrations for Al, Mg, Na, Si, V and $SO_4{^{2-}}$, respectively. Also, Ca, Fe, K, Si, $Cl^-$, and $K^+$ showed high in incinerator. In the case of glass furnace, Na, Pb, K, Si, $Na^+$ and $SO_4{^{2-}}$ represented high concentrations. Power plant showed higher EC/OC concentrations than other sampling sites. These results suggest the possible role for complement establishment process of emission inventory and emission management for PM.