• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.37-38
• /
• 2018

BIM(Building Information Modeling) in the architecture, VDC(Virtual Design and Construction) defined CIFE(Center for Integrated Facility Engineering) of Stanford university in USA, and Data-driven design definition issued by TECDOC-1284 of IAEA are doing data-level design generated by 3D CAD technology, integrating and managing related information based on the 3D model, and Using 3D models effectively during nuclear power plant life cycle. 3D model of domestic nuclear power industry is using interference review between design fields, 4D system linked 3D construction model and schedule activity, but the 3D model generated in the design phase is effectively not utilized during the construction, operation, decommissioning. therefore, This study is aimed to suggest 3D model LOD(Level of Detail) advancement method through the analysis of existing literature, 2D drawings, and 3D models throughout nuclear power plant lifecycle.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.393-402
• /
• 2006

The purpose of this study is to develop mechanisms of nD model-based design by the combination of 2D drawing standards and 3D building models from the current 2D and text-based design. The aim of this study can be archived by defining the 2D model extension definitions for the IFC model development and harmonizing existing 2D standards. The paper examines 1) 3D Representation of Building Element and Building Services element, and 2D Model extension of IFC2X.2, 2) Basic development of additional 2D element that should be added to IFC model, and 3) mapping method between current 2D standard and IFC2.X2. Following this approach, the interoperability problem between 3D model and 2D drawing can be solved and finally an extended data model could be developed.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.1-8
• /
• 2016

This paper provides a method for generating flight path of Unmanned Aerial Vehicle (UAV) that is intended to be used in visual inspection of dome-type nuclear containment building. The method basically employs 3-D model to extract accurate location coordinates. Two basic route patterns that provide guide lines in defining moving locations were defined for each side wall and dome section of the containment. The route patterns support sequential capturing of images as well. In addition, several simple equations and an algorithm for calculation of the moving location on the route were developed on the basis of 3-D geometric characteristics of the containment building. A prototype computer program has been implemented to validate the proposed method, and a case study shows the method can visualize covering area in 3-D model as well.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.579-586
• /
• 2009

4D simulation integrates the 3 dimensional model of a building with the construction schedule, and it leads to the possibility of virtually checking the construction process and the building itself in advance. However, the existing problem of 4D simulation is the difference between the demands of architects, engineers, and construction site workers in 4D simulation. This study suggests the possible way to enhance the availability of 4D simulation, considering more the practical demands from the construction site. In order to conduct this study, we build a 3D BIM model of a business-residential complex and link the model with the pre-defined construction schedule in order to make a 4D simulation. This study concludes with the optimized 4D simulation methodology based on BIM model considering the demands in perspective of the construction site. It would contribute to the harmonic collaboration among architects, engineers, and labors in the construction site when using 4D simulation based on BIM model.

• 한국측량학회지
• /
• 제25권4호
• /
• pp.347-354
• /
• 2007

최근 대형 포털 업체들이 3차원 공간 영상 서비스를 선보이면서 3차원 가상 도시모델에 대한 수요가 증가하고 있고, 이에 따라 업체들은 경쟁적으로 보다 높은 해상도 및 정확도의 서비스를 제공하고자 노력하고 있다. 건물 모델은 3차원 도시모델의 구성요소 중 가장 많은 개체수를 차지하며, 각 개체별로 다양한 형태와 텍스쳐 정보를 가지는 특성으로 인해 현실적인 모델 제작은 시간이 많이 소요되고 제작비용도 높다. 이런 문제는 광범위 지역의 3차원 도시모델 서비스 및 업데이트를 제약하는 가장 큰 요소이다. 따라서 본 연구에서는 수치지도의 건물 레이어를 기반으로 생성된 건물 기하학적 모형에 항공사진 또는 위성영상과 같은 공간영상을 활용하여 빠르고 경제적으로 텍스쳐 매핑을 수행하여 실감 3차원 건물 모델을 생성할 수 있는 방법을 제안하였다. 실험결과 제안된 방법은 여러 가지 항공사진 및 위성영상을 이용한 빠르고 경제적인 3차원 빌딩 모델 생성에 효과적임을 알 수 있었다.

• 한국측량학회지
• /
• 제30권4호
• /
• pp.353-362
• /
• 2012

건물모델의 정규화 없이 3차원 건물 모델링을 하면 건물모델에 왜곡이 발생하거나 위상적 불일치가 발생할 수 있다. 반면에, 정규성을 고려할 경우 제약조건으로 인하여 재구성이 가능한 건물 유형이 제한적일 수 있다. 이에 본 연구에서는 보다 다양한 건물을 고려한 건물모델 정규화 방법을 적용하여 항공라이다 데이터로부터 3차원 건물을 모델링하였다. 우선 특징공간에서의 군집화와 객체공간에서의 분할을 통해 건물점들을 지붕면으로 분할한다. 건물모델 구성요소 간의 평행성, 대칭성, 일치성 등을 충족시키기 위하여 면-선-점의 순차적 조정에 의한 정규화를 통해 3차원 건물을 재구성한다. 도시 지역에 대한 실험을 통해 기존의 방법들보다 다양한 형태의 건물에 대하여 정규성을 충족하는 3차원 모델을 생성할 수 있음을 확인하였다. 또한, 정규화가 건물모델의 정확도에 미치는 영향을 정량적으로 분석하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.365-367
• /
• 2008

A digital city model represents a 3D environment of a city with various city object information such as 3D building model, road, and land cover. Usually, at least two satellite images with some image overlap are necessary and a complex satellite-related computation needs to be carried out to create a city model. This is an expensive technique, because it requires many resources and excessive computational cost. The authors propose a methodology to create a digital city model including 3D building model and land cover information from a single high resolution satellite image. The approach consists of image pan-sharpening, shadow recovery, building occlusion restoration, building model extraction, and land cover classification. We create a digital city model using a single KOMPSAT-2 image and review the result.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.773-775
• /
• 2003

From the view point of data fusion, we integrate LIDAR data and digital aerial images to perform 3D building modeling in this study. The proposed scheme comprises two major parts: (1) building block extraction and (2) building model reconstruction. In the first step, height differences are analyzed to detect the above ground areas. Color analysis is then performed for the exclusion of tree areas. Potential building blocks are selected first followed by the refinement of building areas. In the second step, through edge detection and extracting the height information from LIDAR data, accurate 3D edges in object space is calculated. The accurate 3D edges are combined with the already developed SMS method for building modeling. LIDAR data acquired by Leica ALS 40 in Hsin-Chu Science-based Industrial Park of north Taiwan will be used in the test.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1093-1099
• /
• 2022

The number of buildings is increasing day by day. The next logical footstep is tackling challenges regarding scarcity of resources and sustainability, as well as shifting focus on existing building structures to renovate and retrofit. Many existing old and heritage buildings lack documentation, such as building models, despite their necessity. Technological advances allow us to use virtual reality, augmented reality, and mixed reality on mobile platforms in various aspects of the construction industry. For these purposes, having a BIM model or high detail 3D model is not always necessary, as a simpler model can serve the purpose within many mobile platforms. This paper streamlines a framework for generating a lightweight 3D model for mobile platforms. In doing so, we use an existing structure's site survey data for the foundation data, followed by mobile VR implementation. This research conducted a pilot study on an existing building. The study provides a process of swiftly generating a lightweight 3D model of a building with relative accuracy and cost savings.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.248-249
• /
• 2019

In the nuclear industry, in order to keep pace with the 4th industrial revolution era, they are trying to improve the construction and maintenance ability by utilizing the technologies such as digital twin and VR/AR from the construction stage. However, the nuclear 3D CAD model, which is used as the base in the latest technology, is heavy due to a large number of facilities per unit space compared to other industrial companies, and it is difficult to directly incorporate the latest technology into the results of CAD programs for design purposes. In this study, in order to improve usability, we tried to lighten the 3D model. First, we analyze the existing nuclear power plant 3D model and draw out the problems and features. Secondly, we derived the factors to consider when we make the 3D CAD models lightweight.