• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.395-402
• /
• 2001

A fusant FG-21 was selected on the basis of higher ${\gamma}-GTP$ activity following fusion process between SM-2 and SM-10 of Bacillus subtilis mutants. ${\gamma}-GTP$ activity of the mutant FG-21 was increased up to 612 U/mL when grown for 36 hr at $37^{\circ}C$ in culture media containing 1% glycerol 1% glycerol, 1% peptone, 0.1% citric acid, 5 mM $K_2HPO_4$, 1 mM $FeCl_3$, 1 mM $MgCl_2$, 1 mM $NH_4Cl$, pH 7.0. In fusnat FG-21, the ratio of protein to total sugar contents for biopolymer A was 38 to 59. for biopolymer B from parental strains it was 19 to 78. Fructose contents determined by HPLC were $573.7\;\mu\textrm{g}/mg\;and\;764.4\;\mu\textrm{g}/mg$ for biopolymer A and B, respectively. And glutamic acid content were $163.7\;\mu\textrm{g}/mg\;and\;94.6\;\mu\textrm{g}/mg$ for biopolymer A and B, respectively. In fusant FG-21, the ratio of fructose to glutamic acid contents for biopolymer A was 78 to 22. For biopolymer B from parental strains it was 89 to 11.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.785-801
• /
• 2017

Biopolymer treatment of geomaterials to develop sustainable geotechnical systems is an important step towards the reduction of global warming. The cutting edge technology of biopolymer treatment is not only environment friendly but also has widespread application. This paper presents the strength and slake durability characteristics of biopolymer-treated sand sampled from Al-Sharqia Desert in Oman. The specimens were prepared by mixing sand at various proportions by weight of xanthan gum biopolymer. To make a comparison with conventional methods of ground improvement, cement treated sand specimens were also prepared. To demonstrate the effects of wetting and drying, standard slake durability tests were also conducted on the specimens. According to the results of strength tests, xanthan gum treatment increased the unconfined strength of sand, similar to the strengthening effect of mixing cement in sand. The slake durability test results indicated that the resistance of biopolymer-treated sand to disintegration upon interaction with water is stronger than that of cement treated sand. The percentage of xanthan gum to treat sand is proposed as 2-3% for optimal performance in terms of strength and durability. SEM analysis of biopolymer-treated sand specimens also confirms that the sand particles are linked through the biopolymer, which has increased shear resistance and durability. Results of this study imply xanthan gum biopolymer treatment as an eco-friendly technique to improve the mechanical properties of desert sand. However, the strengthening effect due to the biopolymer treatment of sand can be weakened upon interaction with water.

• Applied Biological Chemistry
• /
• v.39 no.3
• /
• pp.165-171
• /
• 1996

The rheological properties of biopolymers produced by Bacillus sp. K-1 and its mutant strains(KM-21, KM-83) were studied. Apparent viscosity of biopolymers decreased as rising the temperature. The biopolymer produced by KM-21 strain showed 1.7 times low viscosity, 2.7 times low viscosity by K-1 and 1.9 times low viscosity by KM-83 at $80^{\circ}C$ compared with at $20^{\circ}C$ respectively. The viscosity of biopolymer solution also increased with increasing the polymer concentration and showed pseudoplastic characteristics which is high temperature dependency in all concentration. The change of the biopolymer viscosity on the pH showed the highest value at the pH 7.0 and it showed lower at acidic condition than at alkaline condition comparatively.

• Geomechanics and Engineering
• /
• v.17 no.5
• /
• pp.445-452
• /
• 2019

Gel-type biopolymers have recently been introduced as environmentally friendly soil binders and have shown substantial strengthening effects in laboratory experimental programs. Although the strengthening effects of biopolymer-treated sands have been verified in previous direct shear tests and uniaxial compression tests, there has been no attempt to examine shear behavior under different confining stress conditions. This study therefore aimed to investigate the strengthening effects of biopolymer-treated sand using laboratory triaxial testing with a focus on confining pressures. Three representative confining pressure conditions (${\sigma}_3=50kPa$, 100 kPa, and 200 kPa) were tested with varying biopolymer contents ($m_{bp}/m_s$) of 0.5%, 1.0%, and 2.0%, respectively. Based on previous studies, it was assumed that biopolymer-treated sand is susceptible to hydraulic conditions, and therefore, the experiments were conducted in both a hydrated xanthan gum condition and a dehydrated xanthan gum condition. The results indicated that the shear resistance was substantially enhanced and there was a demonstrable increase in cohesion as well as the friction angle when the biopolymer film matrix was comprehensively developed. Accordingly, it can be concluded that the feasibility of the biopolymer treatment will remain valid under the confining pressure conditions used in this study because the resisting force of the biopolymer-treated soil was higher than that in the untreated condition, regardless of the confining pressure.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.1
• /
• pp.104-106
• /
• 2008

Enterobacter sp. BL-2 excretively produced a unique cationic polyglucosamine biopolymer PGB-1 comprised of more than 95% D-glucosamine in an acetate-mediated culture condition. The excretion of the biopolymer PGB-1 was closely associated with the cellular morphology of Enterobacter sp. BL-2, a feature highly dependable on the pH of the medium. The initially formed uneven and irregular surface cells were aggregated into the cell-biopolymer network structure connected by the adhesion modules of the cell-bound biopolymer. The excretive production of the biopolymer PGB-1 coincided with the disruption of the cell-biopolymer network, most actively at the medium pH of 8.0.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.409-420
• /
• 2010

Biopolymer-based materials recently have garnered considerable interest as they can decrease dependency on fossil fuel. Biopolymers are naturally obtainable macromolecules including polysaccharides, polyphenols, polyesters, polyamides, and proteins, that play an important role in biomedical applications such as tissue engineering, regenerative medicine, drug-delivery systems, and biosensors, because of their inherent biocompatibility and biodegradability. However, the insolubility of unmodified biopolymers in most organic solvents has limited the applications of biopolymer-based materials and composites. Ionic liquids (ILs) are good solvents for polar organic, nonpolar organic, inorganic and polymeric compounds. Biopolymers such as cellulose, chitin/chitiosan, silk, and DNA can be fabricated from ILs into films, membranes, fibers, spheres, and molded shapes. Various biopolymer/biopolymer and biopolymer/synthetic polymer composites also can be prepared by co-dissolution of polymers into IL mixtures. Heparin/biopolymer composites are especially of interest in preparing materials with enhanced blood compatibility.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.2
• /
• pp.107-115
• /
• 1996

In order to study the effect of modified starch and biopolymer on the quality of smoked pork sausage, acetylated starch and biopolymer were added to the smoked pork sausage and physical characteristics, sensory qualify, and water holding capacity were Investigated. In the textural characteristics SA, SB and SC group were lower in hardness than control group. Cohesiveness was lower only on the SA group which was added by 0.6% acetylated starch. Adhesiveness was higher on the SA and SC group by addition of biopolymer. All treatment group were lower in springiness than control group. The effect of biopolymer and acetylated starch on gumminess and chewiness was evident but not constant In each group. In the mechanical characteristics such as hardness, springiness, gumminess, chewiness were indicated positive correlation coefficient, the other hand negative correlation in adhesiveness. The result of folding test was not changed in 20 days storage. At 30 days storage SB group contained the 0.6% acetylate starch showed the best point. The other hand the biopolymer added SA and SC group less acceptable, the biopolymer added SA and SC group, which were added by biopolymer and acetylated, indicated cap. 65% lower VBN value than control group. Sensory evaluation were not significantly difference in hardness, fracturability and adhesiveness but cohesiveness was higher in SC group. Gumminess was significantly higher in SA and SC group by biopolymer addition. Overall acceptability in sensory evaluation were significantly higher In SC group by biopolymer addition. Overall acceptability in sensory evaluation correlated significantly with fracturability, chewiness and gumminess. Chewiness of sensory evaluation and mechanical gumminess were not significantly correlated.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.137-142
• /
• 2001

In order to prove physiological function of biopolymer from Bacillus coagulans CE-74, in vitro experiments simulating the passive membrane transport of gastrointestinal tract were carried out using dialysis membrane. And inhibition effect of isolated biopolymer on tyrosinase and angiotensin converting enzyme (ACE) were observed. The glucose retardation index after 30 min dialysis was 43.5% in the presence of 2% biopolymer. As the dialysis period became longer, the retarding effect toward glucose absorption decreased and the effect was close to zero after 5 hr dialysis. The bile acid retardation index after 30 min dialysis was 34% and 44.2% in the presence of 1% and 2% biopolymer, respectively. The effect decreased as the dialysis time elapsed. It was measured by arosinase inhibition activity of biopolymer that inhibition effect was 48.5% in $20\;{\mu}g/{\mu}l$. In a ACE inhibition activity, biopolymer showed inhibition activity as 97% in $10\;{\mu}g/{\mu}l$.

• Microbiology and Biotechnology Letters
• /
• v.35 no.3
• /
• pp.203-209
• /
• 2007

Soybean milk cake (SMC) was used for the solid-state fermentation by Bacillus subtilis PUL-A isolated from soybean milk cake. In the presence of 5% glutamate the maximum production of biopolymer (59.9 g/kg) was performed by fermentation at $42^{\circ}C$ for 24 hr. The recovered biopolymer was consisted of 87% $\gamma$-polyglutamic acid with molecular weight of $1.3{\times}10^6$ dalton and other biopolymer. The biopolymer solution showed the great decrease in consistency below pH 6.0, regardless of the molecular weight of PGA. Biopolymer solution has a typical pseudoplastic flow behavior and yield stress. The consistency of biopolymer solution was greatly decreased by increasing heating time and temperature in acidic condition compared to the alkaline condition. In kaolin clay suspension, the flocculating activity of biopolymer was the highest value with 15 mg/L biopolymer and 4.5 mM $CaCl_2$, but decreased greatly with $FeCl_3$. The flocculating activity of biopolymer was maximum at pH5, but decreased drastically by heating at $60{\sim}100^{\circ}C$. In particular, biopolymer with native PGA showed the efficient flocculating activity compared to that of modified biopolymer containing low molecular weight of PGA.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.111-118
• /
• 1996

For the screening and the development of the new bio-material, cultural conditions for the exo-biopolymer (EBP) production throught the submerged cultivation of Ganoderma lucidum mycelium were investigated. Also, the fractionations and the purifications of the exo-biopolymer were carried out and the chemical compositions of the exo-biopolymer were examined. The optimal culture conditions for the exo-biopolymer production were pH 5.0, 30$^{\circ}C$ and 100 rpm of agitation speed in the medium containing of 5% (w/v) glucose, 0.5%(w/v) yeast extract, 0.1% (w/v) ($(NH_4)_2HPO_4$, and 0.05% (w/v) $KH_2PO_4$. In the flask cultivation for 7 days under these conditions, the concentration of the maximum exo-biopolymer and the cell mass were 15.4g/l and 18.8g/l, respectively. The specific growth rate was 0.039 $hr^{-1}$. In addition, the substrate consumption rate, and the exo-biopolymer production rate were 0.043$gg^{-1}$$hr^{-1}$ and 0.025$gg^{-1}$$hr^{-1}$, respectively. The exo-biopolymer was fractionated into BWS (water soluble exo-biopolymer) and BWI (water insoluble exo-biopolymer) by the water extraction, and the sugar contents of two fractions were higher than 97% (based on dry basis). The components sugar of BWS and BWI fractions were glucose, galactose, mannose, xylose, and fucose. Their molar ratios were 3.6:1.5:2.1:0.5: trace and 2.9:3.1:2.0:1.6:0.3, respectively.