• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1461-1472
• /
• 2000

Recently, the mobile users seem to be rapidly increasing and then the capacity limit will be reached at close hand. In these situations, to provide them with good quality of service in the coming future, newly planned cell design is needed. In the next generation mobile communication systems, namely IMT-2000, good quality services will be possible only by designing the cell structure hierarchically with the help of appropriate cell planning. In the research process, the standardization reports on the future mobile cellular IMT-2000 system (3GPP) are investigated and the parameters, that are essential to cell planning, are also researched. Modeling of IMT-2000 radio link and the numerical analysis on that make it possible to calculate the forward/reverse link budget, system capacity call blocking probability Erlang capacity and cell coverage. In planning the cell of IMT-2000 system, various parameters are considered, such as hierarchical cell structure, number of users, data service forms and propagation area environments. From the results, efficient cell planning methods are proposed. Through this thesis efficient cell planning and maximum capacity will be achieved in the beginning of commercial IMT-2000 service.

• Journal of Information Processing Systems
• /
• v.2 no.2
• /
• pp.88-94
• /
• 2006

In wireless cellular networks, previous researches on admission control policies and resource allocation algorithm considered the QoS (Quality of Service) in terms of CDP (Call Dropping Probability) and CBP (Call Blocking Probability). However, since the QoS was considered only within a predetermined cell capacity, the results indicated a serious overload problem of systems not guaranteeing both CDP and CBP constraints, especially in the hotspot cell. That is why a close interrelationship between CDP, CBP and cell capacity exists. Thus, it is indispensable to consider optimal cell capacity guaranteeing multiple QoS (CDP and CBP) at the time of initial cell planning for networks deployment. In this paper, we will suggest a distributed determination scheme of optimal cell capacity guaranteeing both CDP and CBP from a long-term perspective for initial cell planning. The cell-provisioning scheme is performed by using both the two-dimensional continuous-time Markov chain and an iterative method called the Gauss-Seidel method. Finally, numerical and simulation results will demonstrate that our scheme successfully determines an optimal cell capacity guaranteeing both CDP and CBP constraints for initial cell planning.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.89-92
• /
• 1997

The objective of this paper is to provide an alternative framework for the integration of process planning and scheduling in cellular manufacturing. The concept of an integrated cellular manufacturing system is defined and the system architecture is presented. In an integrated cellular manufacturing system, there are three modules : the process planning module, the manufacturing-cell design module, and the cell-scheduling module. For each module, the tasks and their activities are explained.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.751-752
• /
• 2008

This paper introduces current technology trend of cell planning system in radio propagation and 3D GIS technologies which are implemented in Cell planning system "CellTREK" for accurate radio propagation analysis. It includes managing of DTM(Digital Terrain Model) data considering building height used by 3D propagation analysis module, and navigation module based on DirectX technology to estimate and eliminate the shadowing area by high rise buildings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2191-2198
• /
• 2013

This paper proposes a RFID cell planning scheme for indoor location-awareness. We theoretically develop four objective functions that yield objective goals significant to the optimal design of a RFID cell topology and simulation is conducted to evaluate the performance of the proposed RFID cell planning scheme. We also evaluate the performance of the proposed technique after practically installing RFID readers in an indoor space to configure a RFID cell topology. Performance evaluations are conducted in terms of the following objective goals: minimal number of RFID readers for configuring a RFID cell topology, maximal RFID cell coverage areas for indoor location-awareness, minimal overlapping cells, and maximal indoor location-awareness accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2221-2229
• /
• 1998

Handoff is an important parameter for system performance and capacity analysis in CDMA cell planning. In this paper, simulation tool for analyzing the effects of soft handoff on cell planning of CDMA network is developed by studying propagation model in 1.9GHz frequency specrum, soft hadnoff algorithm given by IS-95, and several parameters for CDMA cell planning. By using the tool, soft handoff gain and effects of soft handoff on cDMA system performance and capacity are analyzed. Research results and simulation tool developed in this paper can be used for optimal CDMA cell planning for PCS and IMT-2000 in 1.9GHz frequency spectrum such as locating base station and parameter optimization.

• Journal of Navigation and Port Research
• /
• v.45 no.5
• /
• pp.231-237
• /
• 2021

Enhancing the performance of maritime wireless communication has been highlighted by the issue of cell planning in the sea area because of lack of an appropriate Propagation Loss Model (PLM). To resolve the cell planning issue in vast sea areas, it was essential to develop the (PLM) matching the intended sea area. However, there were considerable gaps between the prediction of legacy PLMs and field measurement in propagation loss and there was a need to develop the adjusted PLM (A-PLM). Therefore, cell planning was performed on this adjusted model, including modification of the base station's location, altitude, and antenna azimuth to meet the quality objectives. Furthermore, in order to verify the availability of the cell planning, Communication Service Quality Monitoring System (CS-QMS) was developed in the LTE-Maritime project to collect LTE signal quality information from the onboard equipment at regular intervals and to ensure that the service quality was high enough to satisfy the goals in each designated grid. As a result of verification, the success rate of RSRP was 95.7% for the intensive management zone (IMZ) and 96.4% for the interested zone (IZ), respectively.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.821-824
• /
• 1999

In this article, as a way of pursuing high spectral efficiency and flexible cell planning, co-channel dual-polarization techniques are suggested for B-WLL applications. It provides a double down stream capacity compared with conventional scheme and also makes some flexibility in cell planning. In order to implement co-channel B-WLL system, some frequency plans, interference cancellation methods, and system block diagrams are presented here.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.197-200
• /
• 1998

LMDS시스템을 이용하여 다양한 멀티미디어 서비스를 제공하기 위한 기지국의 위치 선정시 필요한 몇 개의 셀 모델에 대하여 동일채널간섭 현상에 대하여 분석하여 국내의 무선 멀티미디어 통신시스템의 기지국 치국을 위한 참고자료로 활용될 수 있도록 하였다.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.2
• /
• pp.365-378
• /
• 2010

For sustainable economic growth, the Korea government continues to increase its investment in R&D and at the same time, have reinforced the management of R&D outcomes and enlargement of its infrastructure for utilization. However, a strategic R&D planning that draws an outstanding outcomes is more important than the management of its post-outcomes. The purpose of this study is to propose an implication on the policy of R&D planning for obtaining a good R&D outcomes such as a high quality patent. We compared and analyzed the determinants of the patent quality in fuel cell and solar cell technology using the count data models. Estimated results showed that the determinants of the patent quality in technologies were different from each other. Therefore, having appropriate R&D planning strategies for all technologies was more effective than applying one same strategy for all because of technological differences, and based on the estimated results, we suggested the R&D planning strategy in fuel cell and solar cell technologies that could in result in high R&D outcomes.