• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.219-219
• /
• 2013

The effect of an electron blocking layer (EBL) on V-I curves in GaN/InGaN multiple quantum well is investigated. For the first time, we found that curves were intersected at 3.012 V and analyzed the reason for intersection. The forward voltage in LEDs with an p-AlGaN EBL is larger than without p-AlGaN EBL at low injection current because the Mg doping efficiency for p-GaN layer was higher than that of p-AlGaN layer. However, the forward voltage in LEDs with an p-AlGaN EBL is smaller than without p-AlGaN EBL at high injection current because the carriers overflow from the active layer when injection current increases in LEDs without p-AlGaN EBL and in case of LED with p-AlGaN EBL, the carriers are blocked by EBL.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.380-390
• /
• 2020

In this study, the traditional electron-blocking layer (EBL) in (In,Ga)N/GaN light-emitting diodes is replaced by a circular EBL that is the same size as the n-pad. The three-dimensional (3D) nonlinear Poisson, drift-diffusion, and continuity equations are adopted to simulate current transport in the LED and its characteristics. The results indicate that the local carrier-density distribution obtained for the circular EBL design is more uniform than that for the traditional EBL design. This improves the uniformity of local radiative recombination and local internal quantum efficiency (IQE) at high injection levels, which leads to a higher lumped IQE and lower efficiency droop. With the circular EBL, the lumped IQE is higher in the outer active region and lower in the active region under the n-pad. Since most emissions from the active region under the n-pad are absorbed by the n-pad, obviously, an LED with a circular EBL will have a higher external quantum efficiency (EQE). The results also show that this LED works at lower applied voltages.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.4
• /
• pp.438-445
• /
• 2023

Objective : Preoperative transarterial embolization (TAE) of tumor feeders in hypervascular spine metastasis is known to reduce intraoperative estimated blood loss (EBL) during surgery. The effect of TAE varies for several reasons, and one controllable factor is the timing between embolization and surgery. However, the adequate timing remains unclear. This study aimed to evaluate the timing and other factors that reduce EBL in spinal metastasis surgery through a meta-analysis. Methods : A comprehensive database search was performed to identify direct comparative studies of EBL stratified by the timing of surgery after TAE for spinal metastasis. EBL was analyzed according to the timing of surgery and other factors. Subgroup analyses were also performed. The difference in EBL was calculated as the mean difference (MD) and 95% confidence interval (CI). Results : Among seven studies, 196 and 194 patients underwent early and late surgery after TAE, respectively. The early surgery was defined as within 1-2 days after TAE, while the late surgery group received surgery later. Overall, the MD in EBL was not different according to the timing of surgery (MD, 86.3 mL; 95% CI, -95.5 to 268.1 mL; p=0.35). A subgroup analysis of the complete embolization group demonstrated that patients who underwent early surgery within 24 hours after TAE had significantly less bleeding (MD, 233.3 mL; 95% CI, 76.0 to 390.5 mL; p=0.004). In cases of partial embolization, EBL was not significantly different regardless of the time interval. Conclusion : Complete embolization followed by early spinal surgery within 24 hours may reduce intraoperative bleeding for the patients with hypervascular spinal metastasis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.233-236
• /
• 2012

In this paper, the output characteristics of GaN-based LED considering blocking layer design variables are analyzed. The basic structure of the LED consists of active region of GaN barrier and InGaN quantum well between AlGaN EBL(Electron Blocking Layer) and AlGaN HBL(Hole Blocking Layer) on GaN buffer layer. The output power, internal quantum efficiency characteristics of LED active region considering Al mole fraction of EBL, thickness of EBL, Al mole fraction of HBL and doping concentration of HBL are analyzed using ISE-TCAD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.291-291
• /
• 2010

Electron-beam lithography (EBL) process is a versatile tool for a fabrication of nanostructures, nano-gap electrodes or molecular arrays and its application to nano-device. However, it is not appropriate for the fabrication of sub-5 nm features and high-aspect-ratio nanostructures due to the limitation of EBL resolution. In this study, the precision assembly and alignment of DNA molecule was demonstrated using sub-5 nm nanostructures formed by a combination of conventional electron-beam lithography (EBL) and plasma ashing processes. The ma-N2401 (EBL-negative tone resist) nanostructures were patterned by EBL process at a dose of $200\;{\mu}C/cm2$ with 25 kV and then were ashed by a chemical dry etcher at microwave (${\mu}W$) power of 50 W. We confirmed that this method was useful for sub-5 nm patterning of high-aspect-ratio nanostructures. In addition, we also utilized the surface-patterning technique to create the molecular pattern comprised 3-(aminopropyl) triethoxysilane (APS) as adhesion layer and octadecyltrichlorosilane (OTS) as passivation layer. DNA-templated gold nanoparticle chain was attached only on the sub-5 nm APS region defined by the amine groups, but not on surface of the OTS region. We were able to obtain DNA molecules aligned selectively on a SiO2/Si substrate using atomic force microscopy (AFM).

• Journal of Korean Neurosurgical Society
• /
• v.62 no.1
• /
• pp.106-113
• /
• 2019

Objective : The efficacy of preoperative embolization for hypervascular metastatic spine disease (MSD) such as renal cell and thyroid cancers has been reported. However, the debate on the efficacy of preoperative embolization for non-hypervascular MSD still remains unsettled. The purpose of this study is to determine whether preoperative embolization for non-hypervascular MSD decreases perioperative blood loss. Methods : A total of 79 patients (36 cases of preoperative embolization and 43 cases of non-embolization) who underwent surgery for metastatic spine lesions were included. Representative hypervascular tumors such as renal cell and thyroid cancers were excluded. Intraoperative and perioperative estimated blood losses (EBL), total number of transfusion and calibrated EBL were recorded in the embolization and non-embolization groups. The differences in EBL were also compared along with the type of surgery. In addition, the incidence of Adamkiewicz artery and complications of embolization were assessed. Results : The average age of 50 males and 29 females was $57.6{\pm}13.5$ years. Lung (30), hepatocellular (14), gastrointestinal (nine) and others (26) were the primary cancers. The demographic data was not significantly different between the embolization and the non-embolization groups. There were no significant differences in intraoperative EBL, perioperative EBL, total transfusion and calibrated EBL between two groups. However, intraoperative EBL and total transfusion in patients with preoperative embolization were significantly lower than in non-embolization in the corpectomy group (1645.5 vs. 892.6 mL, p=0.017 for intraoperative EBL and 6.1 vs. 3.9, p=0.018 for number of transfusion). In addition, the presence of Adamkiewicz artery at the index level was noted in two patients. Disruption of this major feeder artery resulted in significant changes in intraoperative neuromonitoring. Conclusion : Preoperative embolization for non-hypervascular MSD did not reduce perioperative blood loss. However, the embolization significantly reduced intraoperative bleeding and total transfusion in corpectomy group. Moreover, the procedure provided insights into the anatomy of tumor and spinal cord vasculature.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.715-715
• /
• 2003

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1073-1077
• /
• 2003

This study aims to investigate the fabrication process of nano silicon mold using electron beam lithography (EBL) to generate the nanometer level patterns by nano-imprinting technology. the nano-patterned mold including 100mm pattern size has been fabricated by EBL with different doses ranged from 22 to 38 ${\mu}C/cm^2$ on silicon using the conventional polymethylmetharcylate(PMMA) resist. The silicon mold is fabricated with various patterns such as circles, rectangles, crosses, oblique lines and mixed forms, The effect of dosage on pattern density in EBL is discussed based on SEM (Scannning Electron Microscopy) analysis of fabricated molds. The mold surface is modified by hydrophobic fluorocarbon (FC) thin films to avoid the stiction during nano-imprinting process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1634-1641
• /
• 2003

In vivo digestion and metabolism trials were conducted with 10 wethers equipped with ruminal, abomasal, and ileal cannulae to evaluate digestion of ensiled broiler litter (EBL), deepstacked broiler litter (DBL), and composted broiler litter (CBL). Wethers were fed a low protein (6.3% CP) basal diet alone or supplemented to 10.3% CP with EBL, DBL, CBL or soybean meal (SBM). All diets were formulated to be isoenergetic (56% TDN, DM basis). Apparent digestibilities of DM, OM, and ADF were not affected (p<0.05) by diet, but digestibility of CP was improved (p<0.05) by N supplementation. Apparent digestibility of CP was lower (p<0.05) for diets supplemented with CBL and DBL than for diets supplemented with SBM and EBL. Ruminal $NH_3$ concentration was 20 to 24 mg/dl at 2 h after feeding litter-supplemented diets compared with 13 mg/dl for SBM. Abomasal N, $NH_3$ N, and nonammonia N flows were increased (p<0.05) by N supplementation, whereas microbial N flow was not influenced (p<0.05) by diet. Compared with SBM and EBL, undegraded dietary CP flow to the abomasum tended to be greater (p<0.1) when wethers were fed DBL and CBLsupplemented diets. Retention of N (g/d) also was greater (p<0.05) due to greater (p<0.05) N intake and lower (p<0.05) urinary N excretion when wethers were fed diets supplemented with litter (especially EBL) vs. SBM. Overall, characteristics of ruminal fermentation and digestion indicated that broiler litter N was utilized efficiently by wethers, but ensiling may be preferable to deepstacking or composting.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.86-86
• /
• 2018

This study was conducted to investigate the effects of modified drum priming and 24-Epibrassinolide (24-EBL) treatment to improve the seed quality for export. 40, 50 and 60% seed moisture content (SMC) of hydrated seeds were incubated for 16 and 24 h in a container with a relative humidity of 99% at 26 rpm for a modified drum priming treatment. The treated seeds were sown at $20^{\circ}C$ and $30^{\circ}C$ (12/12h, light/dark) with four replications of 25 seeds on pleated paper. The seeds were hydrated with water or 24-EBL solutions of $10^{-7}$, $10^{-8}$ and $10^{-9}M$, respectively. The germination of the modified drum primed seeds (24 h incubation after 60% SMC hydration) improved to 1.6 days mean germination time (MGT) and $46%{\cdot}day^{-1}$ germination rate (GR), while the untreated seeds showed 2.1 days MGT and $28%{\cdot}day^{-1}$ GR. The modified drum priming (60% SMC and 24 h incubation with $10^{-9}M$ 24-EBL) showed improved results in MGT (1.8 days) and GR (55%) at $20^{\circ}C$, whereas untreated seeds showed 2.3 days MGT and 44% GR. Under $30^{\circ}C$, germination of modified drum primed seeds was significantly improved in GP (80%), GR ($31%{\cdot}day^{-1}$), HS (55%) and MGT (3.3 days), however, untreated seeds showed decreased GP (27%), GR ($22%{\cdot}day^{-1}$), HS (55%) and MGT (4.8 days). This study showed that the germination of lettuce seeds is enhanced by 24 h drum incubation with 24-EBL and this method can be used effectively to achieve the benefits of early germination and uniform seedling development. In addition, these treatments circumvent thermo-dormancy of lettuce seed and have a possibility of high-quality and environment-friendly seed processing.